East Riding of Yorkshire · England
Bath Re-enamelling in North Ferriby
Bath re-enamelling for North Ferriby, without a refit. Send us photos for a fixed price, then we come to you.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Chips and rust in more than one place
How we handle bath re-enamelling in North Ferriby
When a bath is structurally fine but worn out on the surface, re-enamelling is usually the most cost-effective option. There is no removal, plumbing or tiling involved. If you are dealing with thin, worn enamel in places and a coloured bath you want in white, we can help, whatever the material.
Big or small, you get the same one-year guarantee.
- Area
- North Ferriby (HU14)
- County
- East Riding of Yorkshire
- Warranty
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
North Ferriby questions
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
Can you re-enamel a roll-top bath?
Yes, often. We resurface the inside, and the outside can be refinished too.
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
Which areas do you work in?
The whole UK, including all of East Riding of Yorkshire. Send your postcode with your photos and we will confirm dates.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time that suits you.
When can you do it?
Your quote comes with available dates. Tell us if you need it done quickly.
What happens next?
We come back with a fixed quote, typically with dates to choose from. There is no obligation to book.
How long does re-enamelling take?
Normally a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Repair or replace: which is better?
A replacement often means several trades over several days. Resurfacing takes one technician and usually a day. Prices start from £350. No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
What you get with us
- Straight answers about what a repair can do
- A fixed quote before you book
- Most jobs done in one visit
- Dust sheets down, tidy finish
Read our prices page and resurfacing vs replacement cost guide.
Honest limits
To be straight with you, there are a few things a repair won’t fix:
- A poorly supported acrylic bath, until it’s firmed up
- Leaking taps or wastes (a plumber’s job)
- A metal bath with a through crack
Send us photos and we’ll tell you honestly before you book.
Materials we work on in North Ferriby
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
DIY repairs versus a professional job
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
North Ferriby and nearby
North Ferriby is about 7 miles west of Kingston upon Hull, in East Riding of Yorkshire. We agree a date that works for you, and we’ll give you an arrival time in advance, so there’s no waiting around. We cover 299 places across East Riding of Yorkshire, from the larger towns to small villages. Our nearest city page is Leeds, about 43 miles away.
Our technicians cover all of HU14. Jobs here include addresses on High Street, Station Road and Church Road. Other places close to North Ferriby include Melton (1 mile west), Welton (2 miles north-west), Brough (2 miles west), Elloughton (3 miles west) and Brantingham (3 miles north-west). Within a short drive, we also cover Beverley (9 miles north), Goole (15 miles west), Hessle (3 miles east), Cottingham (5 miles north-east), Market Weighton (12 miles north-west) and Hedon (13 miles east).
Near you in North Ferriby
We visit homes around Church of All Saints, The Duke of Cumberland pub and South Hunsley School, among other places. There’s a railway station in North Ferriby itself: Ferriby station. A little further out are Barton upon Humber Castle (3.9 miles south-east) and Hull and East Riding Hospital (3.2 miles east). Not far away are Far Ings National Nature Reserve.
Repairs by material
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Keeping it looking good
Most damage we see is avoidable. A few tips:
- Wash away dyes and oils after use
- Fix dripping taps quickly
- Don’t leave a chip unrepaired
- Dry the bath after use to stop limescale
Dry the bath after use if possible, especially in hard water areas, and rinse off any bath products.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Landlords, agents and businesses in North Ferriby
For anyone letting property in or around North Ferriby, we can repair and quote for several addresses together. Send pictures for each one and we will come back with a combined price.
For developers and builders, we fix damage before handover. Several plots can be done in one visit to keep costs down.
How we price bath re-enamelling
Resurfacing from £350. There is no area surcharge for North Ferriby. What changes the price is:
- Previous DIY repairs that have to come out
- How hard the colour is to match
- How much damage there is
- The material and finish
What it costs depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed quote from your pictures, so you know the cost before booking.
How to get a fixed price
Phone pictures are fine, there’s no need for anything special. Make sure they show:
- A wider photo showing the entire bath
- Something in shot to show the size
- Daylight if possible, and no flash reflection
- A close-up of the damage, in focus
Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and you’ll get a fixed quote back. There’s no charge for the quote and no obligation.
How it works
Here’s how a visit typically runs: we arrive on time, sheet and mask the area around the job, do the job and tidy away. Allow most of the day from start to finish. Before we go, we will explain how long to leave it and how to look after it.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the day after.
Before we arrive
- Clear toiletries, mats and anything else from around the area
- Mention any parking restrictions or tricky access
- Keep children and pets away from the room on the day
Ask for a price
For a price in North Ferriby, photos are the quickest way: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Advice
Nearby places to North Ferriby
More services for North Ferriby
About our accreditations · Every repair comes with a one-year guarantee.
