Cumbria · England
Bath Re-enamelling in Brougham
Problem with your bath in Brougham? We put it right where it is, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- Stains that will not shift
- Enamel that is lost its shine and feels rough
Looking after it afterwards
Simple care helps the repair last. Our advice:
- Keep suction mats out of the bath
- Wipe the bath dry after use in hard water areas
- Do not let dyes or oils sit on the finish
- Don’t leave a chip unrepaired
Rinse the bath and wipe it over after use, especially in hard water areas, to stop limescale building up.
Don’t try to scrub a worn bath back to shine. It just wears the enamel further.
Bath re-enamelling in Brougham without replacing anything
The bath stays where it is, so your taps, tiles and plumbing are left alone. It usually takes one visit, with the bath ready to use the following day. If you are dealing with a bath that stays dull however much you clean it and chips and rust in more than one place, we can help, on cast iron baths, Victorian roll-tops and acrylic baths alike.
You’re covered for a year from the day of the repair. If anything isn’t right, ring us and we’ll sort it.
- Location
- Brougham (CA10)
- County
- Cumbria
- Warranty
- One year on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Covering Brougham
Brougham is about 1 mile south-east of Penrith, in Cumbria. Anywhere in CA10, a technician comes to you. Brougham is one of 438 places in Cumbria we cover. You can also see our page for Newcastle upon Tyne, about 49 miles away.
Postcode districts we cover here: CA10. Local streets include Brougham Avenue and Brougham Hall Gardens. If you’re just outside Brougham, we cover Eamont Bridge (1 mile west), Carleton (1 mile north), Yanwath (1 mile west), Clifton (1 mile south) and Penrith (1 mile north-west). Within a short drive, we also cover Appleby-in-Westmorland (11 miles south-east), Bongate (11 miles south-east) and Shap (8 miles south).
Landmarks near Brougham
Around Brougham, we work in homes near North Lakes School, Castle Park and Beehive Inn, among other places. You will also find Chapel Of St Wilfred Of Brougham Chapel (within half a mile west) and Ullswater Community College (1.1 miles north-west). Brougham’s nearest station is Penrith station, roughly 1.5 miles north-west. Further afield, we also cover the area around Cumbria Constabulary Museum (0.6 miles north-west) and Brougham Castle (0.6 miles north-east). Green spaces nearby include Heughscar Hill.
What affects the price in Brougham
Resurfacing from £350. There’s no charge for travel to Brougham. The price depends on:
- The type of damage
- Unusual colours or finishes
- Where the damage is and how we get to it
- Any earlier repairs that need removing first
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Getting a price from photos
You can take the pictures on your phone, there is no need for anything special. Make sure they show:
- Daylight if possible, and no flash reflection
- The material, if you know it
- Whether it’s been repaired or coated before
- One picture of the whole bath
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
Other services in Brougham
Common problems we fix in Brougham
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
You may need us if you’ve spotted any of these:
- Staining under the taps and around the waste
- Several chips and rust patches
- A bath in a colour that no longer suits
- An old resurfacing that is failing
Before you book anyone
- How the colour is matched
- Whether the price is fixed and includes VAT
- If travel is included in the price
- How soon you can use it again
Repairs by material
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Brougham questions
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
What do you need from me?
Send photos through the quote form or call 0345 017 0787, and we will take it from there.
Are there extra charges for Brougham?
Travel is included in the price, with the same prices everywhere we work.
Is it messy?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as homeowners.
Does re-enamelling smell?
Some odour is normal while we spray, so we ventilate the room. It fades as the coating cures.
Do you cover Brougham?
Yes. We work across the UK and come to Brougham and the rest of Cumbria. Send photos and we will quote, or call 0345 017 0787.
Can you repair something that’s been repaired before?
Most of the time. Let us know what was used before and we’ll plan for it.
Why repair rather than replace?
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Our bath re-enamelling starts from £350. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Why book with us
- CHAS and Constructionline accredited
- Free fixed quotes from pictures
- Generally one visit, start to finish
- Dust sheets down, tidy finish
Take a look at our pricing or bath cost comparison.
Landlords, agents and businesses in Brougham
We are used to working with agents and managing companies. Just send photos, the address and how to get access.
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
Honest limits
It helps to know what we cannot do too:
- A cast iron or steel bath that’s cracked right through
- An acrylic bath that flexes badly underfoot
- Problems we cannot see until an old finish comes off
Send us photos and we’ll tell you honestly before you book.
What we work on
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
What happens on the day
On the day itself, there’s little for you to do. Show us the job, point us to the room, and we will get on with it. The job generally runs to a full day.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Getting ready for the visit
- Mention any earlier repairs or resurfacing
- Keep pets and children out of the room while we work
- Keep a parking space free if you can
Ask for a price
You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
