Cumbria · England
Bath re-enamelling & resurfacing in Bongate, Cumbria
Full bath re-enamelling and resurfacing at your home in Bongate, with a one-year guarantee on every repair.
- Resurfacing from £350
- A peeling or bubbling previous coating
- A dull, rough surface that will not come clean
Bath re-enamelling at your home in Bongate
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. We work on pressed steel baths, Victorian roll-tops and cast iron baths, and common reasons people contact us are an original cast iron bath that needs restoring and wear marks under the taps.
We stand behind the work with a one-year guarantee, so you’re covered after the visit.
- Location
- Bongate (CA16)
- County
- Cumbria
- Cover
- A year, on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Where we work around Bongate
Bongate is about 12 miles south-east of Penrith, in Cumbria. Anywhere in CA16, we come to you. We work in all 438 towns and villages across Cumbria, from the larger towns to small villages. We work right across the region, from Bongate to Newcastle upon Tyne (about 44 miles away).
Postcode districts we cover here: CA16. Streets in the area include Back Lane, Rookery Lane and Drawbriggs Lane. Neighbouring places we cover include Appleby-in-Westmorland (1 mile north-west), Burrells (1 mile south-west), Crackenthorpe (2 miles north-west), Hilton (3 miles east) and Dufton (3 miles north). We also work in nearby towns such as Penrith (12 miles north-west), Fair Hill (13 miles north-west), Carleton (12 miles north-west), Kirkby Stephen (9 miles south-east) and Shap (8 miles west).
Around Bongate
Typical jobs here are in homes near Appleby Grammar School, Church of St Michael and Appleby Primary School. Bongate’s nearest station is Appleby station, roughly 0.5 miles north. Well-known places in the area include Dyke Nook Farm Museum (3.5 miles south-east) and Appleby Castle (under half a mile west). The countryside around Bongate includes Murton Pike.
- Other local spots include North Westmorland Rural District (1.8 miles north-west)
Bongate questions
What if the damage is worse than the pictures show?
Your quote covers the damage in the pictures. If there’s more, we will tell you before starting.
I rent my home. Can I book you?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged.
How long does re-enamelling take?
Most baths are done in a day and can be used the day after. We give you timings with the quote.
Can you repair several things at once?
Of course, and it normally saves money. Send pictures of everything together and you will get one combined price.
Can you repair something that is been repaired before?
Yes, regularly. It can add a little time, which we include in the quote.
Is the work guaranteed?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
What does bath re-enamelling cost?
Prices start from £350. Every job gets a fixed price based on pictures of the damage. Send a close-up and a photo of the entire item with your CA16 postcode.
Does the bath have to be removed?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
DIY repairs versus a professional job
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
A DIY attempt is not a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.
What bath re-enamelling costs
Prices start from £350. There are no hourly rates or hidden extras. The price depends on:
- How easy the damage is to reach
- Whether we combine several jobs
- The size and number of damaged areas
- Any earlier repairs that need removing first
Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
How to get a fixed price
Phone photos are fine. Just make sure we can see:
- What it’s made of, if you know
- One sharp close-up of the damage
- A coin or ruler next to the damage for scale
- Details of any past repairs
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed price the same day in most cases.
Landlord and trade work in Bongate
We work for landlords, letting agents and housing providers in Bongate as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
We are used to working with agents and managing companies. Send the address, pictures and access details and we will arrange it.
How the visit works
The work is clean and fairly quiet. Protection goes down first, then the work takes a full day. At the end we talk you through the curing time and the aftercare.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Let us know if it has been repaired before
- Have a window or extractor fan available
- Tell us about parking, stairs or access
How to get a price
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Advice
When to call us in Bongate
Hard water speeds up the wear, and abrasive cleaners do the most damage.
Keep an eye out for these signs:
- Several chips and rust patches
- Thin, worn enamel in places
- Brown or grey marks that do not clean off
- Enamel that is lost its shine and feels rough
Questions to ask before booking
- When it can be used again
- What protection goes down before work starts
- If travel is included in the price
- How to look after the finish
What a repair cannot fix
It helps to know what we can’t do too:
- A bath that is rusted through
- Leaking taps or wastes (a plumber’s job)
- A cast iron or steel bath that is cracked right through
Send us pictures and we will tell you honestly.
What we work on
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Cast iron baths
Nearby places to Bongate
Also in Bongate
Why repair rather than replace?
If the bath is sound, re-enamelling is generally much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Our bath re-enamelling starts from £350. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send pictures and we will give you the exact figure.
Why choose Surface Doctor in Bongate
- One-year guarantee on every repair
- Repair technicians who travel to you, UK-wide
- Rooms protected and left tidy
- Colours mixed by hand to suit your surface
Take a look at our prices page or bath cost comparison.
What your bath is made of matters
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.
About our accreditations · Every repair comes with a one-year guarantee.
