Cheshire East · England

Bath Re-enamelling for Brown Moss homes

Full bath re-enamelling and resurfacing for householders, landlords and businesses in Brown Moss. Free, fixed quotes from your pictures.

  • Resurfacing from £350
  • Wear marks under the taps
  • An outdated colour you’d like to change
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath re-enamelling in Brown Moss?

How we price bath re-enamelling

Prices start from £350. We give every job a fixed price from pictures. This is what makes a difference:

  • Access to the area
  • How many items we do on one visit
  • How many areas need work
  • What the surface is made of

Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.

How to get a fixed quote

Before you send pictures, these tips help us give you a firm price:

  • A coin beside the damage so we can judge size
  • A picture taken from further back
  • A close-up of the damage, in focus
  • The postcode, so we can plan the visit

To get a price, send a couple of photos through our quote form or ring us. We’ll say straight away whether it can be repaired.

Bath re-enamelling in Brown Moss without replacing anything

Re-enamelling is a one-day job for most baths, and you can use the bath the following day. Nothing is disconnected or removed. Whether it’s several chips and rust patches and brown or grey marks that don’t clean off, we can help, whatever the material.

A one-year guarantee comes as standard.

Basin with yellowed glaze resurfaced to a clean white finish
Location
Brown Moss (CW5)
Region
Cheshire East
Warranty
One year on every repair
Price
From £350. Free, fixed price from pictures
Phone
0345 017 0787
Updated
23 October 2026

Repairs by material

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.

Cast iron

Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.

What we do, step by step

We agree an arrival time beforehand. Once we are there, the work takes the best part of a day for most jobs. The room is left tidy.

  1. First we protect the bathroom and set up ventilation.
  2. Next we degrease the bath and fix chips and rust spots.
  3. We key the surface and put on a bonding primer.
  4. We spray several coats of new enamel finish.
  5. Once cured, normally by the day after, the bath is ready.

Before we arrive

  • Tell us about any previous repairs or coatings
  • Keep children and pets away from the room on the day
  • Move bottles, mats and clutter away from the area

Getting a price

Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed quote without visiting.

Get a fixed quote

Read more

When a repair isn’t the answer

In fairness, there are a few things a repair will not fix:

  • A cast iron or steel bath that is cracked right through
  • Steel that has corroded right through
  • Anything hidden under an old coating, until we remove it

Send us photos and we will tell you honestly before you book.

What we work on

  • Basins & shower trays
  • Pressed steel baths
  • Acrylic baths
  • Cast iron baths
  • Victorian roll-tops

Looking after it afterwards

A little care keeps the finish looking good. We recommend:

  • Fix dripping taps quickly
  • Wipe the bath dry after use in hard water areas
  • Avoid suction-cup mats
  • Clean with a soft cloth and mild detergent

Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Fix dripping taps quickly.

Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.

Repairing versus replacing in Brown Moss

A replacement frequently means several trades over several days. Resurfacing takes one technician and normally a day, with the bath back in use the day after. Prices start from £350. Our prices are the same across the UK, with no extra for Brown Moss. What changes the price is the job itself: how much damage, what it’s made of and how many items.

Why choose Surface Doctor in Brown Moss

  • Honest advice, even when it means no job
  • A fixed quote before booking
  • No extra charge for your area
  • Dust sheets down, tidy finish

Read our prices page and resurfacing vs replacement cost guide.

Landlords, agents and businesses in Brown Moss

Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.

We regularly work with letting and managing agents. Send the address, photos and access details and we will handle the rest.

Covering Brown Moss

Brown Moss is about 5 miles south-east of Nantwich, in Cheshire East. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. We cover all 254 towns and villages in Cheshire East, from the larger towns to small villages. We work right across the region, from Brown Moss to Manchester (about 34 miles away).

All of CW5 is within our area, from the main roads to the quietest streets. We also cover the places around Brown Moss: Hunsterson Four Lane End (1 mile north), Birchall Moss (1 mile north-west), Woolfall (1 mile west), Bridgemere (1 mile east) and Hatherton (2 miles north). Within a short drive, we also cover Crewe (7 miles north), Congleton (15 miles north-east), Nantwich (5 miles north-west), Middlewich (13 miles north), Sandbach (10 miles north) and Coppenhall (7 miles north).

What’s near Brown Moss

We visit homes around St John's Church and Bridgemere CofE Primary School and the streets around them. Nearby you’ll also find Checkley cum Wrinehill (2.8 miles east) and Heighley Castle (4.5 miles east). The countryside around Brown Moss includes Black Firs and Cranberry Bog.

Map of Brown Moss © OpenStreetMap contributors

DIY kit or professional repair?

A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.

If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.

Brown Moss: your questions answered

Can you change the colour of my bath?

Yes, white is the usual choice. Mention the colour you want when you send photos.

Can you re-enamel a roll-top bath?

Yes, frequently. We resurface the inside, and the outside can be refinished too.

Is repairing better than replacing?

Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we will tell you.

Do you hold any accreditations?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Can you repair something that’s been repaired before?

Yes, we often do. Removing the old work can add time, and that is in the quote.

Is it safe with children and pets around?

Just keep them out of the work area. We will let you know when it’s safe to use again.

Will there be a smell?

There may be a mild smell during the work.

Will it make a mess?

We protect the room with dust sheets and masking first, and we clean up when we’ve finished.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.