Cheshire East · England
Bath re-enamelling & resurfacing in Bridgemere, Cheshire East
We travel to Bridgemere for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- A dull, rough surface that will not come clean
- Brown or grey marks that do not clean off

Bath re-enamelling in Bridgemere without replacing anything
When a bath is structurally fine but worn out on the surface, re-enamelling is usually the most cost-effective option. There is no removal, plumbing or tiling involved. Our technicians work on Victorian roll-tops, pressed steel baths and cast iron baths, and common reasons people contact us are a coating lifting around the plughole and brown or grey marks that don’t clean off.
Whatever the size of the job, it’s backed by a one-year guarantee.
- Location
- Bridgemere (CW5)
- Region
- Cheshire East
- Warranty
- A year, on every repair
- Price
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026

Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
When a repair is not the answer
We won’t take on work that will not last, so here’s what a repair cannot put right:
- A bath that is rusted through
- Leaking taps or wastes (a plumber’s job)
- Problems we can’t see until an old finish comes off
If in doubt, send photos and we will say what we think.
Surfaces we repair
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Cast iron baths
Repair or replace in Bridgemere?
Replacing a bath normally involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and generally one day, and the bath can be used the day after. Our bath re-enamelling starts from £350. Our prices are the same across the UK, with no extra for Bridgemere. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Why book with us
- Colours mixed by hand to suit your surface
- Rooms protected and left tidy
- No extra charge for your area
- CHAS and Constructionline accredited
Read our prices page and resurfacing vs replacement cost guide.
What bath re-enamelling costs
Resurfacing from £350. A fixed quote means you know the cost before booking. We look at:
- How many areas need work
- Whether it’s a chip, crack, burn or wear
- How many items we do on one visit
- Where the damage is and how we get to it
A repair generally costs much less than people expect, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.
How to get a fixed quote
You can normally get a fixed price without us visiting. To help us price it:
- A clear, close picture of the problem area
- Natural light rather than flash
- A photo taken from further back
- Details of any past repairs
If you’re in Bridgemere and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
When to call us in Bridgemere
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
These are the problems we are asked about most:
- Wear marks under the taps
- Lots of chips and rust spots
- A roll-top that is seen better days
- An outdated colour you’d like to change
What to look for in a quote
- How the colour is matched
- Aftercare advice
- Is the price fixed, and does it include VAT?
- Whether cleaning and preparation are in the price
Bridgemere and the surrounding area
Bridgemere is about 6 miles south-east of Nantwich, in Cheshire East. Across the CW5 area, a technician comes to you. We work in 254 places in Cheshire East. Our nearest city page is Manchester, about 34 miles away.
We cover every part of the CW5 postcode area. We also travel to Brown Moss (1 mile west), Blakenhall (2 miles north), Hunsterson Four Lane End (2 miles north-west), Birchall Moss (2 miles west) and Woolfall (3 miles west). We also work in nearby towns such as Crewe (7 miles north), Congleton (14 miles north-east), Nantwich (6 miles north-west), Middlewich (13 miles north), Sandbach (10 miles north) and Coppenhall (8 miles north).
What’s near Bridgemere
In Bridgemere, that means homes near Bridgemere CofE Primary School and the streets around them. Further afield, we also cover the area around Heighley Castle (3.2 miles east) and Checkley cum Wrinehill (1.6 miles north-east). For a walk, there’s Black Firs and Cranberry Bog.
How the visit works
Your technician turns up at the time we agreed with you and checks the damage against your pictures first. Dust sheets and masking tape go down before we open a single tin. Most visits take the best part of a day, and we leave the room as we found it.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- Once cured, normally by the next day, the bath is ready.
Before we arrive
- Clear the area around the damage
- Keep pets and children out of the room while we work
- Let us know if it has been repaired before
How to get a price
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job the same day in most cases.
Read more
Landlord and trade work in Bridgemere
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which is easier on the people living there.
Landlords, letting agents and housing providers in Bridgemere use us as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Common questions in Bridgemere
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
Can landlords book you?
Yes, often. We can quote for several properties together and work between tenancies.
Can you make a coloured bath white?
Yes, white is the usual choice. Mention the colour you want when you send pictures.
Will the new finish last?
Care for it and it lasts. Gentle cleaning, no suction mats.
Someone resurfaced my bath and it’s peeling. Can you help?
Typically, yes. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Do you cover Bridgemere?
Yes, we do. We send a technician to Bridgemere for every job, with no extra charge for travel.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
What your bath is made of matters
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Nearby places to Bridgemere
Other services in Bridgemere
About our accreditations · Every repair comes with a one-year guarantee.

