Birmingham · England

Bath Re-enamelling in Browns Green

Damaged bath in Browns Green? We put it right where it is, match it on site and guarantee the work for a year.

  • Resurfacing from £350
  • Thin, worn enamel in places
  • An original cast iron bath that needs restoring
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling in Browns Green

How we price bath re-enamelling

Prices start from £350. We price every job individually, from your pictures. What matters most is:

  • What the surface is made of
  • The size and number of damaged areas
  • Doing more than one item at once
  • How hard the colour is to match

The price reflects the work involved, not your postcode. The full price is agreed before booking.

How to get a fixed quote

When you take your pictures, a few simple things make all the difference:

  • The postcode, so we can plan the visit
  • What it’s made of, if you know
  • A clear, close picture of the problem area
  • Any earlier repairs or coatings

If you are in Browns Green and want a price, pictures are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.

Bath re-enamelling at your home in Browns Green

We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. Whether it’s chips and rust in more than one place and wear marks under the taps, we can help, on basins & shower trays, acrylic baths and Victorian roll-tops alike.

The work is covered for a year after we finish. If anything isn’t right, ring us and we will come back.

Area
Browns Green (B20, B21, B42)
Area hub
Birmingham
Guarantee
One year on every repair
Quotes
From £350. Free, fixed quote from pictures
Telephone
0345 017 0787
Last updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

What we can’t put right

Honesty matters more than a booking, so here’s what a repair will not do:

  • A poorly supported acrylic bath, until it’s firmed up
  • Damage hidden under a previous coating, until it’s stripped back
  • Steel that has corroded right through

Not sure? Send pictures and we will give you a straight answer before booking.

What we work on

  • Cast iron baths
  • Acrylic baths
  • Basins & shower trays
  • Pressed steel baths
  • Victorian roll-tops

Work for landlords and builders

For anyone letting property in or around Browns Green, we can repair and quote for several addresses together. Just send photos for each address and we’ll come back with a combined price.

We carry out planned and one-off repairs for housing associations and facilities teams in Birmingham and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

How to care for the repair

It’s all simple stuff, just a few sensible habits:

  • Keep toiletries on a shelf rather than in the bath
  • Stick to gentle, non-abrasive cleaners
  • Rinse off hair dye, oils and bath bombs immediately
  • Respect the curing time we give you

Treat the new finish gently at first: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.

Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.

Why repair rather than replace?

Replacing a bath can take several days across several trades. Re-enamelling is one technician, normally one day, and the bath is usable the day after. Our bath re-enamelling starts from £350. The price depends on how much damage there is and what kind, the material and how many items we do on one visit. We give a fixed price from your pictures, so you know the cost before booking.

Why choose Surface Doctor in Browns Green

  • Everything repaired in place
  • CHAS and Constructionline accredited
  • Work done at your home or business
  • No extra charge for your area

Take a look at our pricing or resurfacing vs replacement cost guide.

About Browns Green

Browns Green is about 3 miles north-east of Smethwick, in Birmingham. We visit clients in Browns Green, so you do not need to take anything anywhere. Our technicians cover all 140 towns and villages across Birmingham.

All of B20, B21 and B42 is covered, from the main roads to the quietest streets. We regularly work on streets such as Lloyd Road, Ebley Road and Mitton Road and the roads around them. Close by, we cover Handsworth Wood (1 mile south-east), Hamstead (1 mile north), Lea Hall (1 mile east), Handsworth (1 mile south-west) and Tower Hill (1 mile north-east). Further out, we also cover Birmingham (4 miles south-east), Royal Sutton Coldfield (5 miles north-east), Erdington (4 miles east), Lee Bank (4 miles south), Cape Hill (3 miles south-west) and Streetly (4 miles north-east).

Near you in Browns Green

We visit homes around Hamstead Hall Academy, St Andrew's Church and King Edward VI Handsworth Wood Girls' Academy and the streets around them. Nearby too are Grestone Academy (within half a mile north-west), The Endwood pub (0.7 miles south-east) and Perry Hall Park (0.8 miles east). The closest station to Browns Green is Hamstead station, roughly 0.8 miles north of the centre. A little further out are Avery Historical Museum (1.7 miles south-west) and All Saints' Hospital (1.9 miles south). The countryside around Browns Green includes Sandwell Valley RSPB reserve and Barr Beacon.

  • Parks and local facilities nearby include Aston Manor (2.2 miles south-east)
Map of Browns Green © OpenStreetMap contributors

DIY kit or professional repair?

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.

How the visit works

We work cleanly and quietly. Protection goes down first, then the work takes the best part of a day. At the end we talk you through how soon it can be used and how to care for it.

  1. We mask and protect the room and ventilate it.
  2. Next we degrease the bath and fix chips and rust spots.
  3. The surface is prepared and a bonding primer applied.
  4. Several coats of new finish are sprayed on.
  5. Once cured, normally by the following day, the bath is ready.

Getting ready for the visit

  • Avoid using the area for a few hours before we arrive
  • Ensure the room can be ventilated
  • Have somewhere for us to park nearby if possible

Get a quote

For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.

Send pictures for a quote

Related advice

Common questions in Browns Green

How much does bath re-enamelling cost in Browns Green?

Prices start from £350. Every job gets a fixed price based on pictures of the damage. Send a close-up and a picture of the whole item and your postcode.

Will the price change on the day?

Your quote covers the damage in the photos. If there is more, we will tell you before starting.

Is it messy?

No. The work area is masked and covered, and we take our waste away with us.

Will there be a smell?

There can be some smell while we work, which is why we ventilate. It fades as everything cures.

How long will the bath be out of use?

Normally one day, with the bath ready the day after. A badly pitted bath can need a second day.

What do you need from me?

A close-up, a wider photo and your postcode. Then we’ll agree a date.

Does someone need to be in?

Yes. The technician needs access to the room for the visit, at a time we agree with you.

Can you quote from photos?

In nearly every case. We only ask to see it in person if the pictures cannot show what we need.

Repairs by material

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.

Acrylic

Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.