North Yorkshire · England
Bath re-enamelling & resurfacing in Broxa, North Yorkshire
Problem with your bath in Broxa? We repair it in place, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- Thin, worn enamel in places
How we price bath re-enamelling
Prices start from £350. There’s no area surcharge for Broxa. The price reflects:
- Doing more than one item at once
- Whether old repairs or coatings need taking off
- How hard the colour is to match
- What kind of damage it is
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Send pictures for a quote
Before you send pictures, these tips help us give you a firm price:
- A coin beside the damage so we can judge size
- A wider photo showing the entire bath
- A clear, close picture of the problem area
- The postcode, so we can plan the visit
A quote takes minutes to ask for: photograph the damage, then the whole bath, add your postcode and send them over. What comes back is a fixed quote, not a guess.
About our bath re-enamelling in Broxa
Most baths are re-enamelled in a day, with the bath ready to use the following day. Taps, tiles, panels and plumbing all stay in place. Typical jobs include stains that won’t shift and an original cast iron bath that needs restoring, on cast iron baths, acrylic baths and Victorian roll-tops.
Big or small, it’s backed by a one-year guarantee in Broxa and across North Yorkshire.
- Location
- Broxa (YO13)
- County
- North Yorkshire
- Warranty
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Aftercare tips
Looking after the surface is easy:
- A quick wipe after use keeps limescale away
- Rinse off hair dye, oils and bath bombs immediately
- Do not use the bath until it has fully cured
- Clean with a soft cloth and mild detergent
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Fix dripping taps quickly.
If a previous coating is starting to peel, do not pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
What your bath is made of matters
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
Covering Broxa
Broxa is about 6 miles west of Scarborough, in North Yorkshire. From the centre of Broxa to the outlying streets, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. Broxa is one of 626 towns and villages in North Yorkshire where we work. We work right across the region, from Broxa to Leeds (53 miles away).
We work across the YO13 postcode area and the streets around it. We also travel to North Moor (3 miles south), Lind Head (4 miles north-east), Sawdon (4 miles south), Burniston (4 miles east) and Scalby (4 miles east). We also work in nearby towns such as Scarborough (6 miles east), Whitby (12 miles north), Falsgrave (6 miles south-east), Filey (12 miles south-east), Pickering (10 miles south-west) and Northstead (6 miles east).
Landmarks near Broxa
Locally, our jobs take us to homes close to St. Peter's Church, among other places. Other landmarks nearby include Scarborough Hospital (5 miles south-east) and Ayton Castle (4.8 miles south-east). Open spaces near Broxa include Forge Valley.
Places near Broxa
Also in Broxa
When to call us in Broxa
Frequently the bath has just had decades of use. Underneath, a cast iron or steel bath is normally as strong as ever.
You may need us if you’ve spotted any of these:
- Staining under the taps and around the waste
- A peeling or bubbling previous coating
- An outdated colour you’d like to change
- A dull, rough surface that won’t come clean
Before booking anyone
- What preparation is included
- Is the price fixed, and does it include VAT?
- How to look after the finish
- How the room is protected while they work
DIY repairs versus a professional job
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Broxa: your questions answered
How long does re-enamelling take?
One day for most baths and can be used the day after. We give you timings with the quote.
How long does re-enamelling last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
What areas do you cover?
Across the UK, and that includes Broxa. Prices do not change with location.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
How do I get a price for bath re-enamelling in Broxa?
Resurfacing from £350. Because every job differs, we price from photos. You will get a fixed figure before you book.
Is it worth repairing rather than replacing?
Generally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.
Can you price it without visiting?
In nearly every case. If pictures do not show enough, we’ll ask for another angle.
Can you resurface a pink bath in white?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
Landlord and trade work in Broxa
For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit.
We work for landlords, letting agents and housing providers in Broxa as well as homeowners. Repairing between tenancies keeps void periods short, and it normally costs far less than a refit.
When we’d advise against a repair
Not everything can be repaired, and we would rather say so up front. We can’t fix:
- Leaks from fittings rather than the bath
- Holes rusted through the metal
- A metal bath with a through crack
Send us pictures and we will tell you honestly before booking.
Materials we repair
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
How the visit works
We turn up at the time we agreed with you, introduces themselves and checks the damage against your pictures first. Dust sheets and masking tape go down before we open a single tin. Most visits take the best part of a day, and the room is left clean and tidy.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
Preparing for the visit
- Have somewhere for us to park nearby if possible
- Have a window or extractor fan available
- Let us know which floor the room is on
Getting a price
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job the same day in most cases.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
