Conwy · Wales
Bath Re-enamelling in Bryn-rhys
Bath re-enamelling in Bryn-rhys without the cost of replacing. Send us pictures for a fixed quote, then we come to you.
- Resurfacing from £350
- Worn patches where water runs and sits
- An outdated colour you’d like to change
How we price bath re-enamelling
Prices start from £350. Prices are worked out job by job. What matters most is:
- How many items we do on one visit
- Unusual colours or finishes
- Where the damage is and how we get to it
- What kind of damage it is
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send pictures and we will give you the exact figure.
Getting a price from photos
Two or three clear pictures are typically enough. It helps if you send:
- Any details about the material
- A coin or ruler next to the damage for scale
- Any earlier repairs or coatings
- Daylight if possible, and no flash reflection
To get a price, send a couple of pictures through our quote form or ring us. We will tell you honestly whether it can be repaired.
Bath re-enamelling in Bryn-rhys without replacing anything
Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. Typical jobs include a period or roll-top bath worth keeping and thin, worn enamel in places, across acrylic baths, cast iron baths and pressed steel baths.
Every job is backed for twelve months. If something goes wrong with the work, we come back.
- Location
- Bryn-rhys (LL28)
- County
- Conwy
- Cover
- A year, on every repair
- Price
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
What happens on the day
You do not need to empty the room beforehand. Everything we use comes in the van with us, lay protective sheets and get going once we have agreed what we’re doing. It normally takes most of the day, and you are welcome to carry on with your day while we work.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
Getting ready for the visit
- Mention any earlier repairs or resurfacing
- Keep children and pets away from the room on the day
- Clear toiletries, mats and anything else from around the area
How to get a price
A quote takes minutes to ask for: photograph the damage, then the whole bath, add your postcode and send them to us. What comes back is a fixed price, not a guess.
Related advice
DIY repairs versus a professional job
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
A DIY attempt is not a disaster. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
Repair or replace: which is better?
Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing generally wins. Resurfacing from £350, with every job priced individually. We do not add extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
What you get with us
- We’ll tell you if it’s not worth repairing
- CHAS, Constructionline and SafeContractor accredited
- Rooms protected and left tidy
- Most jobs done in one visit
See our full price list and guide to resurfacing and replacement costs.
Looking after it afterwards
So the finish stays in good condition for years:
- Avoid suction-cup mats
- Don’t leave bottles, razors or sponges standing on the surface
- Get any chip repaired quickly
- Respect the curing time we give you
Rinse the bath and wipe it over after use, particularly where water is hard, to stop limescale building up.
Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Work for landlords and builders
We are used to working with agents and managing companies. Send the address, photos and access details and we’ll arrange it.
We work for landlords, letting agents and housing providers in Bryn-rhys as well as homeowners. Repairing between tenancies keeps void periods short, and it typically costs far less than a refit.
When to call us in Bryn-rhys
Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
Signs it’s time to call us include:
- A coloured bath you want in white
- A period or roll-top bath worth keeping
- Brown or grey marks that do not clean off
- A peeling or bubbling previous coating
Questions to ask before booking
- How your room will be protected
- If travel is included in the price
- How the colour is matched
- What preparation is included
Our work in Bryn-rhys
Bryn-rhys is about 3 miles south-west of Colwyn Bay, in Conwy. Wherever you are in the LL28 postcode area, a technician comes to you. We cover all 75 towns and villages across Conwy, from the larger towns to small villages. We work right across the region, from Bryn-rhys to Liverpool (37 miles away).
Every address in LL28 is covered. From Y Bryn, Dalar Las and Parc Derwen or a nearby road, a technician can come to you. Other places close to Bryn-rhys include Llansanffraid Glan Conwy (1 mile south-west), Pentrefelin (1 mile south), Dolwyd (1 mile north-east), Esgyryn (2 miles north) and Bryn-y-maen (2 miles east). Within a short drive, we also cover Bae Colwyn (3 miles north-east), Llandudno (4 miles north-west), Old Colwyn (4 miles north-east), Colwyn Bay (4 miles east), Abergele (8 miles east) and Colwyn Bay (3 miles north-east).
Near you in Bryn-rhys
We visit homes around Ysgol Aberconwy, The Cross Keys Inn and Parish Church of St Ffraid. There’s a railway station in Bryn-rhys itself: Glan Conwy station. Other landmarks nearby include Conwy Hospital (2.6 miles north-west) and Marl (1.7 miles north-west). Not far away are Coed Dolwyd and Rhos on Sea Golf Course Lake.
Questions from Bryn-rhys
How long will the bath be out of use?
Typically one day, with the bath ready the day after. A badly pitted bath can need a second day.
What happens next?
You will get a fixed quote back. There’s no obligation to book.
What if the damage is worse than the pictures show?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Is it OK to have pets in the house?
Yes, as long as they stay out of the room we are working in. We’ll tell you when the room can be used again.
Is there a smell?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It fades as the coating cures.
Can you re-enamel a roll-top bath?
Yes, frequently. We resurface the inside, and the outside can be refinished too.
Do you need to take the bath out?
No, it stays where it is. Everything is done in your bathroom, with the room masked and ventilated.
How soon can you come?
That depends on our diary for your area. Send pictures with your postcode and we’ll reply with the earliest dates.
Nearby places to Bryn-rhys
Other services in Bryn-rhys
Different materials, different repairs
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.
About our accreditations · Every repair comes with a one-year guarantee.
