Conwy · Wales
Bath Repair for Bryn-rhys homes
Damaged bath in Bryn-rhys? We repair it in place, mix the colour on the day and guarantee the work for a year.
- Repairs from £95
- Holes from dropped items
- Rust spots around the plughole
Do you need bath repair in Bryn-rhys?
Most bath damage comes from something dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On steel and cast iron baths, any chip down to the metal lets water in, and rust follows.
Typical reasons for a call-out include:
- A hole punched through by something heavy
- Hairline or through cracks in acrylic
- Chips on the rim or sides
- Damage done while the bathroom was being fitted
Comparing quotes
- Who will actually do the work
- Whether there are any call-out or travel charges
- What the guarantee covers, and for how long
- What happens if they find more damage
How we handle bath repair in Bryn-rhys
Most of our bath repairs take a few hours, and you can normally bathe again the next day. You won’t need a plumber or tiler, because the bath doesn’t move. We’re frequently asked to fix a failed DIY repair that’s discoloured or lifting and a cracked acrylic bath, across whirlpool & spa baths, cast iron enamel and pressed steel enamel.
The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.
- Area
- Bryn-rhys (LL28)
- County
- Conwy
- Warranty
- A year, on every repair
- Quotes
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Repair or replace in Bryn-rhys?
For damage in one or two places, a repair is the obvious choice. It costs far less than a new bath plus fitting, it takes one visit, and the bathroom stays exactly as it is. Repairs from £95, with every job priced individually. A repair generally costs much less than people expect, especially compared with replacing and refitting. Send photos and we will give you the exact figure.
What you get with us
- Rooms protected and left tidy
- One-year guarantee on every repair
- We come to you, anywhere in the UK
- Nothing taken out or refitted
See our full price list and bath cost comparison.
Prices and what affects them
Prices start from £95. We give every job a fixed quote from photos. This is what makes a difference:
- What the surface is made of
- How hard the colour is to match
- Access to the area
- The type of damage
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Send photos for a quote
Good photos mean an accurate price. Here’s what helps:
- Any details about the material
- Natural light rather than flash
- Where you are, by postcode
- A clear, close picture of the problem area
For a price in Bryn-rhys, photos are the quickest way: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
DIY kit or professional repair?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
Honest limits
In fairness, some problems need a different fix:
- Flexing caused by a failed cradle or loose feet
- Leaks from the waste or overflow fittings (a plumber’s job)
- Metal that has corroded all the way through
If in doubt, send photos and we will say what we think before you book.
Materials we repair
- Cast iron enamel
- Pressed steel enamel
- Roll-top & freestanding
- Acrylic
- Whirlpool & spa baths
How it works
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take a morning or an afternoon. We clean up when we’re done and tell you when it’s ready to use.
- We start by cleaning the damage and taking out loose enamel and rust.
- We fill the damage and sand it flush with the surrounding surface.
- The colour is mixed on the spot to match your bath.
- We apply the finish coats and polish the repair so it blends in.
- Once it has cured, usually by the day after, the bath is ready to use.
Getting ready for the visit
- Open a window if you can
- Mention any parking restrictions or tricky access
- Clear toiletries, mats and anything else from around the area
How to get a price
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them over. What comes back is a fixed price, not a guess.
Read more
Repairs by material
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They do not rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, particularly by the plughole, so early repairs matter.
Your questions about bath repair in Bryn-rhys
Can you quote from photos?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
I tried a repair kit. Can you fix it?
Yes. We remove the old filler and start again. Mention it when you send photos.
Can landlords book you?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across Conwy.
Can you fix rust around the plughole?
Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.
How do I book?
A close-up, a wider photo and your postcode. After that, we just agree a date.
Are there extra charges for Bryn-rhys?
We do not add a call-out fee. The fixed quote covers the visit and the work.
Will I be able to see the repair?
On a glossy bath, you will struggle to find it. On older, dull enamel the repair can look glossier than the area around it.
How soon can you come?
Your quote comes with available dates. Tell us if you need it done quickly.
Keeping it looking good
Once the work has cured, treat it gently:
- Put a towel in the bath if you’re working above it
- A dripping tap stains enamel, so fix it early
- Don’t leave a fresh chip for long
- Stick to mild cleaners and a soft cloth
Don’t leave razors, cans or hair grips in the bath, because they can mark the enamel. A dripping tap should be fixed early, too.
Tape over a fresh chip or crack until it’s repaired, so water cannot get in. Take it off before we arrive.
About Bryn-rhys
Bryn-rhys is about 3 miles south-west of Colwyn Bay, in Conwy. Whether you are in the middle of Bryn-rhys or on the outskirts, the service is the same: a fixed quote, a tidy visit and a guarantee. We work in 75 places in Conwy. You can also see our page for Liverpool, about 37 miles away.
Our visits in LL28 are booked in the same way as anywhere else. Local streets include Y Bryn, Dalar Las and Parc Derwen, and we cover them all. We also cover the places around Bryn-rhys: Llansanffraid Glan Conwy (1 mile south-west), Pentrefelin (1 mile south), Dolwyd (1 mile north-east), Esgyryn (2 miles north) and Bryn-y-maen (2 miles east). Within a short drive, we also cover Bae Colwyn (3 miles north-east), Llandudno (4 miles north-west), Old Colwyn (4 miles north-east), Colwyn Bay (4 miles east), Abergele (8 miles east) and Colwyn Bay (3 miles north-east).
Near you in Bryn-rhys
Typical jobs here are in homes near Ysgol Aberconwy, The Cross Keys Inn and Parish Church of St Ffraid and the streets around them. There is a railway station in Bryn-rhys itself: Glan Conwy station. Nearby you’ll also find Conwy Hospital (2.6 miles north-west) and Marl (1.7 miles north-west). Not far away are Coed Dolwyd and Rhos on Sea Golf Course Lake.
Towns and villages near Bryn-rhys
More services for Bryn-rhys
About our accreditations · Every repair comes with a one-year guarantee.
