Neath Port Talbot · Wales
Bath Re-enamelling for Brynbryddan homes
Fixed-price bath re-enamelling in Brynbryddan and the surrounding area, done in a single visit in most cases.
- Resurfacing from £350
- Thin, worn enamel in places
- A bath in a colour that no longer suits
Bath re-enamelling in Brynbryddan without replacing anything
Many of the baths we re-enamel are period roll-tops, which would be difficult and expensive to replace. Resurfacing them in place keeps the original bath. We regularly repair Victorian roll-tops, cast iron baths and pressed steel baths, and people most often call us about worn patches where water runs and sits and stains that won’t shift.
You are covered for a year from the day of the repair. Just call us if there is a problem and we’ll come back.
- Area
- Brynbryddan (SA12, SA13)
- Area hub
- Neath Port Talbot
- Warranty
- One year on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Landlords, agents and businesses in Brynbryddan
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit.
Hospitality businesses can’t afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
Places near Brynbryddan
Other services in Brynbryddan
Brynbryddan questions
Someone resurfaced my bath and it’s peeling. Can you help?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Does re-enamelling smell?
Yes, while we’re applying the finish. Ventilation keeps it down, and it fades as the finish cures.
What do you need from me?
Just pictures, your postcode and a contact number. On the day, access to the room.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as householders across Neath Port Talbot.
What if the damage is worse than the pictures show?
We stop, show you and agree any change before carrying on. You will not be charged for anything you haven’t agreed.
I rent my home. Can I book you?
Of course. Check with your landlord; we can send the quote to them too.
Is there any odour?
There may be a mild smell during the work that clears as it cures.
It’s been repaired before. Can you still fix it?
Most of the time. Let us know what was used before and we’ll plan for it.
What we cannot put right
To be straight with you, there are a few things a repair won’t fix:
- Problems we cannot see until an old finish comes off
- A metal bath with a through crack
- A poorly supported acrylic bath, until it’s firmed up
If in doubt, send pictures and we will say what we think before you book.
Surfaces we repair
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
Repairing versus replacing in Brynbryddan
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Resurfacing from £350, with every job priced individually. Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.
What you get with us
- Honest advice, even when it means no job
- Fixed prices from your photos
- One price list for the whole UK
- Colours mixed by hand to suit your surface
Read our pricing or bath cost comparison.
Can I fix it myself?
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
Our work in Brynbryddan
Brynbryddan is about 1 mile north-east of Port Talbot, in Neath Port Talbot. Customers in Brynbryddan get the same service as everywhere else we cover: a fixed price from your photos, then a visit to do the work. Our repair technicians cover all 100 towns and villages in Neath Port Talbot.
Our technicians cover all of SA12 and SA13. You’ll find streets such as Cwmavon Road, Cwmclais Road and Cefncoed Road. Other places close to Brynbryddan include Cwmbychan (1 mile north), Caerhendy (1 mile south-east), Corlannau (1 mile south), Cwmavon (1 mile east) and Pwll-y-glaw (2 miles north-east). We also work in nearby towns such as Neath (4 miles north-west), Mount Pleasant (3 miles north), Pontardawe (8 miles north), Glyn-neath (11 miles north-east), Pentreffynnon (4 miles north-west) and Pencaerau (3 miles north-west).
Local landmarks in Brynbryddan
Our customers here include homes close to Church of St Michael, Cwmafan Primary School and St Joseph's RC School and 6th Form Centre and the streets around them. Brynbryddan’s nearest station is Baglan station, about 1.4 miles west of the centre. Nearby you will also find Pelenna (2.4 miles north-east) and Aberafan Centre (1.2 miles south). Open spaces near Brynbryddan include Mynydd Dinas and Gnoll Estate Country Park lake 1.
What affects the price in Brynbryddan
Resurfacing from £350. We charge the same across the UK, including Brynbryddan. The price reflects:
- The size and number of damaged areas
- Whether old repairs or coatings need taking off
- Where the damage is and how we get to it
- What kind of damage it is
No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
Getting a price from photos
When you take your pictures, a few simple things make all the difference:
- Daylight if possible, and no flash reflection
- A photo taken from further back
- Where you are, by postcode
- A coin or ruler next to the damage for scale
Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and we will reply with a fixed price. There is no charge for the quote and no obligation.
How it works
You do not need to empty the room. We bring everything we need with us, lay protective sheets and get going once we’ve agreed what we are doing. It generally takes most of the day, and you can get on with other things while we’re there.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- Once cured, normally by the following day, the bath is ready.
How to prepare
- Mention if the room is upstairs or in a flat
- Let us know if it has been repaired before
- Point us to the nearest place to park
How to get a price
Email us pictures of the damage and a wider shot of the whole item, and tell us you are in Brynbryddan, and we will reply with a fixed price.
Read more
Aftercare tips
Most damage we see is avoidable. A few tips:
- Rinse off hair dye, oils and bath bombs immediately
- A quick wipe after use keeps limescale away
- Keep suction mats out of the bath
- Clean with a soft cloth and mild detergent
A quick rinse and wipe after use helps, especially in hard water areas, to stop limescale building up.
On a worn bath, rust spots keep spreading. It’s simpler to resurface before they spread.
What your bath is made of matters
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s the part we put right.
About our accreditations · Every repair comes with a one-year guarantee.
