Neath Port Talbot · Wales
Bath re-enamelling & resurfacing in Mount Pleasant, Neath Port Talbot
Bath re-enamelling for Mount Pleasant, without a refit. Send us pictures for a fixed price, then book a visit.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- Wear marks under the taps
Bath re-enamelling at your home in Mount Pleasant
Re-enamelling is a one-day job for most baths. Nothing is disconnected or removed. Typical jobs include brown or grey marks that don’t clean off and a dull, rough surface that won’t come clean, on acrylic baths, Victorian roll-tops and pressed steel baths.
The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.
- Location
- Mount Pleasant (SA11, SA10)
- Region
- Neath Port Talbot
- Warranty
- A year, on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What we can’t put right
A repair isn’t right for every job, including:
- Leaks from fittings rather than the bath
- A metal bath with a through crack
- Holes rusted through the metal
Not sure? Send photos and we’ll give you a straight answer.
Materials we repair
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
What we’re called out for in Mount Pleasant
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
Contact us if you’ve noticed:
- A coloured bath you want in white
- Staining under the taps and around the waste
- Wear marks under the taps
- A period or roll-top bath worth keeping
What to look for in a quote
- How long it needs to cure
- If travel is included in the price
- What happens if the damage is worse than the pictures show
- A fixed quote, and whether VAT is included
Mount Pleasant and the surrounding area
Mount Pleasant is about 1 mile south-east of Neath, in Neath Port Talbot. Book a date that suits you, and we will give you an arrival time in advance, so there is no waiting around. We work in all 100 towns and villages across Neath Port Talbot.
Postcode districts we cover here: SA11 and SA10. We regularly work on streets such as Old Road, Canal Road and Cimla Road. Neighbouring places we cover include Neath (1 mile north-west), Pencaerau (1 mile south-west), Penrhiwtyn (1 mile south-west), Cwrt-sart (1 mile south-west) and Ynysymaerdy (1 mile south). Further out, we also cover Port Talbot (4 miles south), Sandfields (4 miles south), Baglan Moors (3 miles south), Sandfields West (4 miles south), Sandfields East (5 miles south) and Pontardawe (5 miles north). Mount Pleasant is one of the larger places we cover in Neath Port Talbot.
Near you in Mount Pleasant
Locally, our jobs take us to homes close to Dwr-y-Felin Comprehensive School, St Joseph's Catholic Primary School (Neath) and St Catherine's Church and the streets around them. The closest station to Mount Pleasant is Neath station, roughly 0.6 miles north. Nearby you will also find Gnoll House (0.6 miles north-east) and Pelenna (2.3 miles east). Open spaces near Mount Pleasant include Pen Tyla Morris and Gnoll Estate Country Park lake 1.
Keeping it looking good
Once the work has cured, treat it gently:
- Get any chip repaired quickly
- Avoid suction-cup mats
- Do not leave bottles, razors or sponges standing on the surface
- Don’t let dyes or oils sit on the finish
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
Don’t try to scrub a worn bath back to shine. It removes more of the surface.
DIY repairs versus a professional job
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
Places near Mount Pleasant
More services for Mount Pleasant
Materials and what they mean for the repair
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Work for landlords and builders
Hospitality businesses can’t afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
We work for landlords, letting agents and housing providers in Mount Pleasant as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
What we do, step by step
We turn up at the time we agreed with you and looks over the damage before anything else. The floor and nearby surfaces are covered before we open a single tin. Most visits take a full day, and we leave the room as we found it.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can usually be used the day after.
Getting ready for the visit
- Point us to the nearest place to park
- Clear the area around the damage
- Keep pets and children out of the room while we work
Getting a price
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them over. What comes back is a fixed quote, not a guess.
Advice
Mount Pleasant: your questions answered
Do you work in Mount Pleasant?
Yes. We work across the UK and come to Mount Pleasant. Send pictures and we will quote, or call 0345 017 0787.
Can you make a coloured bath white?
Yes, most people go for white. Mention the colour you want when you send photos.
Is there a call-out fee?
No. Our quotes include travel, and we charge the same wherever you are.
Is it messy?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Can tenants book a repair?
We’re happy to deal with the tenant, landlord or agent. Just make sure the landlord agrees.
Do I need to be at home?
Yes. We need access to the room while we work, at a time that suits you.
Is repairing better than replacing?
Usually, when the rest is in good condition. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
How do I book?
A close-up, a wider photo and your postcode. After that, we just agree a date.
What bath re-enamelling costs
Resurfacing from £350. We price every job individually, from your photos. What matters most is:
- Whether old repairs or coatings need taking off
- What the surface is made of
- The size and number of damaged areas
- The type of damage
Set against the cost of replacement, repairing normally costs far less, because there is no removal, plumbing or making good. The quote lists exactly what you are paying for.
Getting a price from pictures
Phone photos are fine, there’s no need for anything special. Just ensure we can see:
- Details of any past repairs
- A wider photo showing the whole bath
- One sharp close-up of the damage
- What it’s made of, if you know
Pricing is simple: snap the damage close up and then the whole item, send them to us with your postcode, and we will reply with a fixed quote. There is no charge for the quote and no obligation.
About our accreditations · Every repair comes with a one-year guarantee.
