Neath Port Talbot · Wales
Bath Re-enamelling in Port Talbot
We travel to Port Talbot for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- Thin, worn enamel in places
- A coating lifting around the plughole
Bath re-enamelling in Port Talbot without replacing anything
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. If you’re dealing with an original cast iron bath that needs restoring and wear marks under the taps, we can help, on cast iron baths, pressed steel baths and basins & shower trays alike.
Big or small, you get the same one-year guarantee in Port Talbot and across Neath Port Talbot.
- Area
- Port Talbot (SA12, SA13)
- Region
- Neath Port Talbot
- Warranty
- A year, on every repair
- Price
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What your bath is made of matters
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported.
Should you replace it?
Replacing a bath can take several days across several trades. Re-enamelling is one technician, generally one day, with the bath back in use the day after. Prices start from £350. Compared with replacing, a repair is usually a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
What you get with us
- Fixed prices from your photos
- Typically one visit, start to finish
- Technicians who travel to you, UK-wide
- No extra charge for your area
Take a look at our full price list or bath cost comparison.
Landlord and trade work in Port Talbot
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
For anyone letting property in or around Port Talbot, we’ll quote for several properties at once. Send photos for each one and we will come back with a combined price.
Looking after it afterwards
To keep it looking its best:
- Don’t let dyes or oils sit on the finish
- Use washing-up liquid and a soft cloth
- Do not leave bottles, razors or sponges standing on the surface
- A dripping tap should be fixed promptly
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Repair dripping taps promptly.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
What we do, step by step
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, then carry out the work, which normally takes a full day. If anything looks different from your photos, we’ll talk to you before going ahead.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
Before we arrive
- Let us know if it has been repaired before
- Mention if the room is upstairs or in a flat
- Have a window or extractor fan available
Ask for a price
The quickest way to a price is to send a couple of photos through our quote form or call us. We’ll say straight away whether it can be repaired.
Read more
What affects the price in Port Talbot
Resurfacing from £350. Prices are worked out job by job. What matters most is:
- Whether we combine several jobs
- How easy the damage is to reach
- Previous DIY repairs that have to come out
- The material and finish
Our prices are the same across the UK, with no extra for Port Talbot. The job itself decides the price: how much damage, what it’s made of and how many items.
Getting a price from photos
Almost every job we do is priced from pictures. This is what to send:
- Whether it’s been repaired or coated before
- One sharp close-up of the damage
- Good light, ideally daylight, without flash glare
- A coin or ruler next to the damage for scale
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Other services in Port Talbot
Questions from Port Talbot
Do you do work for letting agents?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Can tenants book a repair?
Of course. Ask your landlord first, and we can send them the quote if that helps.
How do I book?
Photos of the damage, a picture of the entire bath and your postcode. After that, we just agree a date.
Is it OK to have pets in the house?
Just keep them out of the work area. We will let you know when it’s safe to use again.
How do I get a price for bath re-enamelling in Port Talbot?
Resurfacing from £350. Because every job differs, we price from photos. You know the full cost before anything is booked.
How durable is a resurfaced bath?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
Is the work guaranteed?
All our work carries our one-year guarantee. We will explain what it covers when we quote.
DIY repairs versus a professional job
If you’re set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
Do you need bath re-enamelling in Port Talbot?
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
Customers usually contact us about:
- Worn patches where water runs and sits
- Staining under the taps and around the waste
- A period or roll-top bath worth keeping
- An outdated colour you’d like to change
Comparing quotes
- Who will actually do the work
- Whether the price covers travel
- Whether the price is fixed and includes VAT
- How your room will be protected
Port Talbot and nearby
Port Talbot is about 7 miles east of Swansea, in Neath Port Talbot. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Port Talbot is one of 100 places in Neath Port Talbot where we work.
We cover every part of SA12 and SA13. From High Street, Station Road and Wellington Place or anywhere nearby, a technician can come to you. You will find Port Talbot on the A48 and A4107, which makes it straightforward to reach. Neighbouring places we cover include Felindre (1 mile north-east), Pen-y-cae (1 mile east), Taibach (1 mile south-east), Goytre (2 miles east) and Tai-Bach (2 miles east). We also work in nearby towns such as Neath (5 miles north), Mount Pleasant (4 miles north), Pontardawe (9 miles north), Glyn-neath (13 miles north-east), Pentreffynnon (5 miles north-west) and Pencaerau (4 miles north). Being one of Neath Port Talbot’s larger places, Port Talbot is somewhere we visit often.
Around Port Talbot
Locally, our jobs take us to homes close to St Joseph's RC School and 6th Form Centre, Church of St Joseph and St Joseph's Catholic Infant School, among other places. Port Talbot’s nearest station is Port Talbot Parkway station, roughly 0.5 miles east. Nearby you will also find Aberafan Castle (less than half a mile north-east) and Aberafan Centre (under half a mile north-east). Open spaces near Port Talbot include Gnoll Estate Country Park lake 1 and Mynydd Dinas.
About our accreditations · Every repair comes with a one-year guarantee.
