Pembrokeshire · Wales

Bath Re-enamelling for Brynhenllan homes

Fixed-price bath re-enamelling in Brynhenllan and the surrounding area, done in a single visit in most cases.

  • Resurfacing from £350
  • A dull, rough surface that will not come clean
  • Brown or grey marks that do not clean off
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath re-enamelling in Brynhenllan

Bath re-enamelling in Brynhenllan, done in place

Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. Our technicians work on basins & shower trays, acrylic baths and Victorian roll-tops, and people most frequently call us about wear marks under the taps and a roll-top that’s seen better days.

You are covered after we leave: each job carries a one-year guarantee, and we explain what it covers before booking.

Basin with yellowed glaze resurfaced to a clean white finish
Location
Brynhenllan (SA42)
Region
Pembrokeshire
Warranty
One year on every repair
Quote
From £350. Free and fixed, from your pictures
Phone
0345 017 0787
Updated
23 October 2026

What we’re called out for in Brynhenllan

A dull surface stains and holds dirt, and scrubbing it wears it down further. At that stage, resurfacing is the fix.

People normally call us after spotting something like this:

  • A period or roll-top bath worth keeping
  • A bath in a colour that no longer suits
  • Wear marks under the taps
  • A peeling or bubbling previous coating

Comparing quotes

  • Whether cleaning and preparation are in the price
  • How to look after the finish
  • The length of the guarantee and what it covers
  • How changes to the job are handled

Choosing a repair company

Work for landlords and builders

We are used to working with agents and managing companies. Just send photos, the address and how to get access.

Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.

When we would advise against a repair

We would rather lose a job than do one that won’t last, so these are the limits:

  • A bath that is rusted through
  • A metal bath with a through crack
  • Leaking taps or wastes (a plumber’s job)

If in doubt, send pictures and we’ll say what we think.

Materials we repair

  • Basins & shower trays
  • Pressed steel baths
  • Acrylic baths
  • Cast iron baths
  • Victorian roll-tops

What affects the price in Brynhenllan

Resurfacing from £350. You won’t pay by the hour. The price is based on:

  • How much damage there is
  • The material and finish
  • Where the damage is and how we get to it
  • Whether old repairs or coatings need taking off

A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.

How to get a fixed price

Phone pictures are fine. Just make sure we can see:

  • The material, if you know it
  • Where you are, by postcode
  • A coin or ruler next to the damage for scale
  • A close-up of the damage, in focus

No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.

Different materials, different repairs

Roll-top and period baths

Freestanding roll-tops can be done inside and out, with the outside refinished as well.

Acrylic

Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.

Our work in Brynhenllan

Brynhenllan is about 15 miles north of Haverfordwest, in Pembrokeshire. Whether you are in the middle of Brynhenllan or on the outskirts, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. Brynhenllan is one of 223 places in Pembrokeshire where we work.

Jobs in SA42 are booked in the same way as anywhere else. Streets in the area include Yr Rhos, Feidr Fâch and Feidr Fawr, and we cover them all. Other places close to Brynhenllan include Dinas Cross (1 mile south-east), Bwlch-mawr (1 mile south), Parrog (3 miles east), Newport (3 miles east) and Lower Town (3 miles south-west). Further out, we also cover Haverfordwest (15 miles south), The Marsh (15 miles south), Fishguard (4 miles south-west), Goodwick (4 miles west), Fishguard and Goodwick (4 miles south-west) and Penyraber (4 miles south-west).

Landmarks near Brynhenllan

Around Brynhenllan, we work in homes near Old Sailors pub. For rail, the closest station is Fishguard Harbour station, about 3.6 miles west of the centre. Nearby you’ll also find Dinas Island Castell (0.5 miles north-east) and Ty Twt Dolls House And Toy Museum (3 miles east). Open spaces near Brynhenllan include Pen y Fan.

Map of Brynhenllan © OpenStreetMap contributors

How to care for the repair

Once the work has cured, treat it gently:

  • Respect the curing time we give you
  • Don’t leave a chip unrepaired
  • Use washing-up liquid and a soft cloth
  • Never use suction bath mats

A quick rinse and wipe after use helps, especially in hard water areas, to stop limescale building up.

Rust spots on a worn bath get worse with time. It’s simpler to resurface before they spread.

DIY repairs versus a professional job

It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.

If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.

FAQs for Brynhenllan

Is the work guaranteed?

Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.

Can you price it without visiting?

Normally, yes. A close-up and a wider photo are enough to give a fixed quote.

Do you charge for travel?

We do not add a call-out fee. Your fixed price includes everything.

Can pets and children be at home?

We ask you to keep children and pets out of the room while we work and until it has cured. Everywhere else in the home is fine.

How soon can you come?

We’ll give you dates with your quote. If it’s urgent, say so and we’ll do what we can.

Can you re-enamel a roll-top bath?

Yes. We can do the inside and outside if you’d like.

Is it worth repairing rather than replacing?

Usually, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.

How long will the bath be out of use?

Typically a day, then it’s ready to use the following day. A badly pitted bath can need a second day.

The process

We begin by going over the job with you. After that, protection goes down around the work area and we start. It normally takes the best part of a day.

  1. First we protect the bathroom and set up ventilation.
  2. We clean and degrease the bath and repair any chips or rust.
  3. We key the surface and put on a bonding primer.
  4. Several coats of new finish are sprayed on.
  5. We leave it to cure, and it’s generally ready the following day.

Before we arrive

  • Mention any earlier repairs or resurfacing
  • Let the surface dry out before the visit
  • Keep a parking space free if you can

Getting a price

Send us a picture of the damage and a wider shot of the entire item, with your SA42 postcode, and we’ll come back with a fixed quote.

Get a fixed price

Related advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.