Nottinghamshire · England
Bath Re-enamelling in Bulcote
Fixed-price bath re-enamelling in Bulcote and the surrounding area, done in a single visit in most cases.
- Resurfacing from £350
- Wear marks under the taps
- A coloured bath you want in white
What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
About our bath re-enamelling in Bulcote
After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, and we take our time over it. Our repair technicians work on pressed steel baths, basins & shower trays and acrylic baths, and common reasons people contact us are an old resurfacing that’s failing and thin, worn enamel in places.
Your repair is guaranteed for a year, as with every job we do.
- Where
- Bulcote (NG14)
- Area hub
- Nottinghamshire
- Warranty
- A year, on every repair
- Quote
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
FAQs for Bulcote
Do you charge for travel?
No. Our quotes include travel, and we charge the same wherever you are.
Is there a smell?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
Can a failed resurfacing be redone?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
Can pets and children be at home?
Just keep them out of the work area. We’ll let you know when it’s safe to use again.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
Is repairing better than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we will tell you.
Do you do work for letting agents?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across Nottinghamshire.
Will the new finish last?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
Nearby places to Bulcote
What else we do in Bulcote
Repair or replace in Bulcote?
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we will give you the exact figure.
Why book with us
- One-year guarantee on every repair
- Everything repaired in place
- Work done at your home or business
- Free fixed quotes from pictures
Take a look at our pricing and guide to resurfacing and replacement costs.
How the visit works
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, and get on with the job, which generally takes a full day. If we find something your photos didn’t show, we’ll explain it before carrying on.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Avoid using the area for a few hours before we arrive
- Have somewhere for us to park nearby if possible
- Tell us if there are stairs or a lift
How to get a price
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
Advice
What bath re-enamelling costs
Resurfacing from £350. A fixed quote means you know the cost before you book. We look at:
- The colour and finish to match
- Whether we combine several jobs
- Whether old repairs or coatings need taking off
- How much damage there is
Instead of hourly rates, we price the entire job up front. Damage, material and access decide it, and combining items on one visit brings it down.
Quotes from your pictures
When you take your photos, a few simple things make all the difference:
- One picture of the entire bath
- One sharp close-up of the damage
- Good light, ideally daylight, without flash glare
- Something in shot to show the size
If you are in Bulcote and want a price, pictures are the quickest way: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Landlords, agents and businesses in Bulcote
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
About Bulcote
Bulcote is about 3 miles north-east of Carlton, in Nottinghamshire. We visit customers in Bulcote and the surrounding area, so you do not need to take anything anywhere. We cover 329 places across Nottinghamshire. We work right across the region, from Bulcote to Birmingham (about 51 miles away).
Jobs in NG14 work the same way as everywhere else we cover. From Old Main Road, The Spinney and The Leas or a nearby road, we can come to you. We also cover the places around Bulcote: Burton Joyce (1 mile south-west), Shelford (1 mile south), Stoke Bardolph (2 miles south), Netherfield (3 miles south-west) and Gedling (3 miles south-west). Further out, we also cover Mansfield (12 miles north-west), Beeston (10 miles south-west), Sutton in Ashfield (13 miles north-west), Hucknall (8 miles west), Newark-on-Trent (11 miles north-east) and West Bridgford (7 miles south-west).
Landmarks near Bulcote
Around Bulcote, we work in homes near Carlton le Willows Academy, Holy Trinity Church and Burton Joyce Primary School, among other places. The nearest railway station is Burton Joyce station, roughly 1 mile south-west. Other landmarks nearby include Radcliffe Asylum (3.5 miles south) and Gunthorpe Henge (1.4 miles east). Not far away are Colwick Woods.
- Other local spots include Shelford and Newton (1.5 miles south-east)
Can I fix it myself?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
Keeping it looking good
To keep it looking its best for years:
- Dry the bath after use to stop limescale
- Do not leave bottles, razors or sponges standing on the surface
- Have chips seen to early
- Fix dripping taps quickly
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Fix dripping taps quickly.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
Honest limits
To be straight with you, there are a few things a repair won’t fix:
- A cast iron or steel bath that is cracked right through
- Leaks from fittings rather than the bath
- An acrylic bath that flexes badly underfoot
Send us photos and we will tell you honestly.
Surfaces we repair
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
About our accreditations · Every repair comes with a one-year guarantee.
