Cheshire West and Chester · England
Bath Re-enamelling in Bunbury
Damaged bath in Bunbury? We put it right where it is, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- A bath in a colour that no longer suits
Bath re-enamelling in Bunbury without replacing anything
When a bath is structurally fine but worn out on the surface, re-enamelling is usually the most cost-effective option. There is no removal, plumbing or tiling involved. Typical jobs include thin, worn enamel in places and staining under the taps and around the waste, in acrylic baths, cast iron baths and basins & shower trays.
The work is guaranteed for twelve months. If there’s a problem with the repair within the year, we return and sort it.
- Area
- Bunbury (CW6)
- Region
- Cheshire West and Chester
- Guarantee
- A year, on every repair
- Price
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Landlord and trade work in Bunbury
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
How the visit works
We work cleanly and quietly. We protect the area first, then the job itself takes most of the day. Before we leave, we explain how soon it can be used and how to look after it.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s typically ready the following day.
How to prepare
- Mention any earlier repairs or resurfacing
- Have somewhere for us to park nearby if possible
- Mention any parking restrictions or tricky access
How to get a price
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them to us. What comes back is a fixed quote, not a guess.
Read more
Towns and villages near Bunbury
What else we do in Bunbury
Repairing versus replacing in Bunbury
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing normally wins. Prices start from £350. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why us?
- Same prices wherever you are
- Repair technicians who travel to you, UK-wide
- We will tell you if it’s not worth repairing
- Everything repaired in place
Take a look at our pricing and guide to resurfacing and replacement costs.
When we would advise against a repair
We’ll always be straight with you, so here’s what a repair won’t do:
- Steel that has corroded right through
- Problems we can’t see until an old finish comes off
- A bath split right through the body
Send us photos and we will tell you honestly before you book.
Surfaces we repair
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Cast iron baths
DIY repairs versus a professional job
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Covering Bunbury
Bunbury is about 6 miles north-west of Nantwich, in Cheshire West and Chester. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Bunbury is one of 224 places in Cheshire West and Chester where we work. You can also see our page for Liverpool, about 23 miles away.
We cover every part of CW6. That includes homes on The Acreage, Willow Drive and Swan Lane. If you are just outside Bunbury, we cover Spurstow (1 mile south-west), Woodworth Green (1 mile east), Bunbury Commons (1 mile north-east), Beeston-brook (1 mile north-west) and Beeston (1 mile west). We also work in nearby towns such as Chester (11 miles north-west), Winsford (7 miles north-east), Northwich (11 miles north-east), Boughton (11 miles north-west), Frodsham (13 miles north) and Hoole (10 miles north-west).
Landmarks near Bunbury
Our customers here include homes close to Nags Head pub, Beeston Towers and St Boniface's Church and the streets around them. Nearby you’ll also find Peckforton Castle (1.9 miles west) and Tarporley War Memorial Hospital (3.1 miles north). The countryside around Bunbury includes Bickerton Hill.
Common questions in Bunbury
Can you price it without visiting?
In nearly every case. If pictures don’t show enough, we will ask for another angle.
How long will the bath be out of use?
One day for most baths and can be used the day after. We’ll confirm timings when we quote.
Does someone need to be in?
Someone needs to let us in and show us the job. You do not need to watch us work.
Will the price change on the day?
We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we have finished.
Someone resurfaced my bath and it’s peeling. Can you help?
Typically, yes. The old coating comes off before we resurface it. Mention it when you send photos.
What do you need from me?
Photos of the damage, a picture of the whole bath and your postcode. After that, we just agree a date.
Is there a guarantee?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
What we’re called out for in Bunbury
Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
These are the problems we are asked about most:
- Worn patches where water runs and sits
- A coloured bath you want in white
- An original cast iron bath that needs restoring
- Enamel that’s lost its shine and feels rough
What to look for in a quote
- What happens if the damage is worse than the pictures show
- Who will actually do the work
- How the colour is matched
- How the room is protected while they work
Keeping it looking good
How the surface is treated afterwards matters:
- Clean with a soft cloth and mild detergent
- Wash away dyes and oils after use
- Repair dripping taps early
- Do not leave bottles, razors or sponges standing on the surface
Wipe the bath dry after use where you can, and rinse away any product left on the surface.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Prices and what affects them
Resurfacing from £350. We don’t charge extra for travel to Bunbury. The price depends on:
- The colour and finish to match
- How much damage there is
- Any earlier repairs that need removing first
- Whether we combine several jobs
Instead of hourly rates, we price the entire job up front. Damage, material and access decide it, and combining items on one visit brings it down.
Send pictures for a quote
Phone photos are fine, there is no need for anything special. Make sure they show:
- Whether it’s been repaired or coated before
- Your postcode, so we can check dates
- One picture of the whole bath
- Natural light rather than flash
We price from pictures so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.
About our accreditations · Every repair comes with a one-year guarantee.
