Argyll and Bute · Scotland
Bath Re-enamelling for Bunnahabhain homes
Bath re-enamelling for Bunnahabhain, without a refit. Send us pictures for a fixed quote, then we come to you.
- Resurfacing from £350
- Worn patches where water runs and sits
- A bath that stays dull however much you clean it
Repairs by material
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Bath re-enamelling in Bunnahabhain, done in place
Resurfacing renews the entire surface of the bath without a refit. It’s the answer when the whole bath is tired rather than one spot. Our technicians work on Victorian roll-tops, acrylic baths and basins & shower trays, and the jobs we see most are enamel that’s lost its shine and feels rough and chips and rust in more than one place.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Location
- Bunnahabhain (PA46)
- Area hub
- Argyll and Bute
- Guarantee
- One year on every repair
- Price
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
When a repair isn’t the answer
Not everything can be repaired, and we’d rather say so up front. Repairs won’t solve:
- Steel that has corroded right through
- An acrylic bath that flexes badly underfoot
- A cast iron or steel bath that is cracked right through
If in doubt, send photos and we will say what we think.
What we work on
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
Looking after it afterwards
Aftercare is simple:
- Repair dripping taps early
- Store bottles off the bath
- Don’t let dyes or oils sit on the finish
- Dry the bath after use to stop limescale
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Fix dripping taps quickly.
Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
About Bunnahabhain
Bunnahabhain is in Argyll and Bute. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Our repair technicians cover 118 places in Argyll and Bute, from the larger towns to small villages. You can also see our page for Glasgow, about 72 miles away.
We work across the PA46 postcode area. Other places close to Bunnahabhain include Port Askaig (2 miles south), Keills (3 miles south), Craighouse (7 miles east), Bowmore (11 miles south-west) and Scalasaig (13 miles north). Remote and island addresses take a little more planning, so it’s best to call first.
What’s near Bunnahabhain
Further afield, we also cover the area around Finlaggan Castle (3.8 miles south-west). The countryside around Bunnahabhain includes Giùr-bheinn and Ardnahoe Loch.
Questions from Bunnahabhain
It’s been repaired before. Can you still fix it?
In most cases. We remove the old repair before doing a new one.
Will the bath be moved?
Not at all. We work on the bath in place, with the room masked and ventilated.
Can landlords book you?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
What happens once I’ve sent pictures?
We look at the pictures and reply with a fixed quote and some dates. If we need another angle, we’ll ask.
Is it safe with children and pets around?
On the day, the room should be kept clear of pets and children, so the repair isn’t disturbed while it cures.
Is there a smell?
Yes, while we are applying the finish. Ventilation keeps it down, and it fades as the finish cures.
How long is the bath unusable?
Most baths are done in a day and can be used the day after. We give you timings with the quote.
What does bath re-enamelling cost?
Resurfacing from £350. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
For landlords and businesses
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
How we price bath re-enamelling
Prices start from £350. There are no hourly rates or hidden extras. The price is based on:
- How easy the damage is to reach
- The size and number of damaged areas
- What the surface is made of
- Whether we combine several jobs
Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access.
Getting a price from pictures
A couple of clear pictures is all it takes. Try to include:
- One sharp close-up of the damage
- A wider photo showing the entire bath
- Natural light rather than flash
- Any earlier repairs or coatings
You do not need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.
How it works
Visits start with a quick look at the job together, so you know exactly what we are doing. After that, protection goes down around the work area and the work begins. You can expect it to take most of the day, and we will keep you posted as we go.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the following day.
Preparing for the visit
- Have somewhere for us to park nearby if possible
- Tell us about parking, stairs or access
- Let us know if it has been repaired before
Getting a price
Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and you’ll get a fixed quote back. There’s no charge for the quote and no obligation.
Related advice
Repair or replace: which is better?
If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Tiles, panels and taps stay put. Prices start from £350. We don’t add extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why book with us
- Technicians who travel to you, UK-wide
- Free fixed quotes from pictures
- Colours mixed by hand to suit your surface
- Rooms protected and left tidy
Read our pricing and guide to resurfacing and replacement costs.
Towns and villages near Bunnahabhain
What else we do in Bunnahabhain
About our accreditations · Every repair comes with a one-year guarantee.
