Argyll and Bute · Scotland
Bath re-enamelling & resurfacing in Port Askaig, Argyll and Bute
Full bath re-enamelling and resurfacing at your home in Port Askaig, with a one-year guarantee on every repair.
- Resurfacing from £350
- Thin, worn enamel in places
- Staining under the taps and around the waste
Keeping it looking good
Nothing complicated is needed, just a few sensible habits:
- Keep suction mats out of the bath
- Do not leave a chip unrepaired
- A dripping tap should be fixed promptly
- Leave the bath for the full curing time before using it
Treat the new finish gently at first: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Do not try to scrub a worn bath back to shine. It removes more of the surface.
Bath re-enamelling in Port Askaig without replacing anything
Many of the baths we re-enamel are period roll-tops, which are heavy, hard to move and costly to replace. Doing them in place keeps an original feature. Common call-outs are for brown or grey marks that don’t clean off and an original cast iron bath that needs restoring, on cast iron baths, Victorian roll-tops and pressed steel baths.
Whatever the size of the job, it’s backed by a one-year guarantee.
- Where
- Port Askaig (PA46)
- Region
- Argyll and Bute
- Cover
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Repair or replace in Port Askaig?
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Our bath re-enamelling starts from £350. We charge the same wherever you are, with no extra for Port Askaig. The job itself decides the price: the material, the amount of damage and how many items.
What you get with us
- Usually one visit, start to finish
- Free fixed quotes from pictures
- We come to you, anywhere in the UK
- Every repair guaranteed for a year
Take a look at our pricing or bath cost comparison.
Port Askaig and nearby
Port Askaig (Gaelic: Port Asgaig) is in Argyll and Bute. Book a date that suits you, and you will know when to expect us, so you’re not left waiting in all day. Our technicians cover 118 places across Argyll and Bute, from the larger towns to small villages. Our jobs stretch from Port Askaig to Glasgow (about 71 miles away).
Every address in PA46 is within our area. We also travel to Keills (1 mile south-west), Bunnahabhain (2 miles north), Craighouse (6 miles east), Bowmore (9 miles south-west) and Port Charlotte (13 miles south-west). If you are somewhere remote, call first so we can plan the visit.
What’s near Port Askaig
A little further out are Finlaggan Castle (2.6 miles west). The countryside around Port Askaig includes Beinn Dubh and Ardnahoe Loch.
Nearby places to Port Askaig
More services for Port Askaig
Landlord and trade work in Port Askaig
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.
Builders use us to fix snagging damage before handover. Several plots can be done in one visit to keep costs down.
What affects the price in Port Askaig
Prices start from £350. There is no area surcharge for Port Askaig. The price reflects:
- The material and finish
- The type of damage
- How many items we do on one visit
- Whether old repairs or coatings need taking off
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.
How to get a fixed quote
You can normally get a fixed price without us visiting. To make it quick:
- One picture of the entire bath
- Where you are, by postcode
- Any earlier repairs or coatings
- One sharp close-up of the damage
Upload a picture of the damage and one of the whole item, and tell us you’re in Port Askaig, and we will come back with a fixed quote.
Common problems we fix in Port Askaig
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. We strip what’s failing and start again.
Look out for any of the following:
- Wear marks under the taps
- A dull, rough surface that won’t come clean
- Stains that won’t shift
- A period or roll-top bath worth keeping
What to look for in a quote
- Whether they match the colour on site
- Whether the price covers travel
- How long the guarantee is and what it covers
- How long it needs to cure
What a repair can’t fix
We’d rather lose a job than do one that will not last, so here’s what a repair cannot put right:
- Anything hidden under an old coating, until we remove it
- Plumbing leaks, which need a plumber
- Steel that has corroded right through
If in doubt, send photos and we’ll say what we think.
Materials we repair
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
- Acrylic baths
- Pressed steel baths
The process
A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and tidy away. Allow the best part of a day from start to finish. Before we go, we’ll explain how long to leave it and how to care for it.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Before we arrive
- Move bottles, mats and clutter away from the area
- Let us know which floor the room is on
- Let us know about parking or access
Get a quote
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Read more
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
Port Askaig: your questions answered
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Do you work in Port Askaig?
Yes, we do. We send a technician to Port Askaig for every job, with no extra charge for travel.
Can landlords book you?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
How soon can you come?
Your quote comes with available dates. Tell us if you need it done quickly.
How long will the bath be out of use?
Typically a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
What happens once I’ve sent pictures?
We review the pictures and send a fixed quote with dates.
Is it messy?
No. The work area is masked and covered, and we take our waste away with us.
Is my repair covered?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
About our accreditations · Every repair comes with a one-year guarantee.
