Somerset · England
Bath re-enamelling & resurfacing in Burcott, Somerset
Our repair technicians come to Burcott for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- Thin, worn enamel in places
Different materials, different repairs
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.
Bath re-enamelling at your home in Burcott
A re-enamelled bath looks and feels like a new one, without any of the disruption of replacing it. It’s ideal if you like your bathroom but not the state of the bath. Whether it’s a period or roll-top bath worth keeping and thin, worn enamel in places, we can usually put it right, on cast iron baths, pressed steel baths and basins & shower trays alike.
Whatever the size of the job, you get the same one-year guarantee.
- Area
- Burcott (BA5)
- County
- Somerset
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Looking after it afterwards
To keep it looking its best:
- Get any chip repaired quickly
- A dripping tap should be fixed promptly
- Avoid suction-cup mats
- A quick wipe after use keeps limescale away
The first few days matter most: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
On a worn bath, rust spots keep spreading and make the job bigger. Resurfacing before they spread keeps it simpler.
Burcott questions
What if the damage is worse than the photos show?
Your quote covers the damage in the photos. Anything extra is discussed before we begin.
Will you leave a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Do the materials smell?
It depends on the job, but often a little. Ventilation keeps it to a minimum, and it soon fades.
Can you price it without visiting?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
How much does bath re-enamelling cost in Burcott?
Resurfacing from £350. We give a fixed price from your photos. Send a close-up and a photo of the whole item with your BA5 postcode.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Can you make a coloured bath white?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
Can you redo someone else’s repair?
Most of the time. Tell us what was done before and we’ll plan for it.
Burcott and the surrounding area
Burcott is about 1 mile south-west of Wells, in Somerset. From the centre of Burcott to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Our repair technicians cover 640 places in Somerset.
Jobs in BA5 work the same way as everywhere else we cover. Neighbouring places we cover include Haybridge (1 mile north-east), Henley (1 mile north), Wookey (1 mile north-west), Wells (1 mile north-east) and Wookey Hole (1 mile north). We also work in nearby towns such as Bridgwater (15 miles west), Burnham-on-Sea (14 miles west), Midsomer Norton (10 miles north-east), Shepton Mallet (6 miles east), Street (6 miles south-west) and Glastonbury (4 miles south-west).
Landmarks near Burcott
Locally, our jobs take us to homes close to The Blue School, St Cuthbert's CofE Junior School and The Burcott Inn and the streets around them. Nearby too are The Blue School (1.2 miles north-east) and Church of St Matthew (0.7 miles north-west). Other landmarks nearby include Mendip Hospital (2.8 miles east) and Cave Museum (1.6 miles north). Not far away are Priddy Mineries and Pen Hill.
What happens on the day
We work cleanly and quietly, so you can carry on at home. Protection goes down first, then the job itself takes most of the day. At the end we talk you through how soon it can be used and how to care for it.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the following day, the bath is ready.
Getting ready for the visit
- Tell us if there are stairs or a lift
- Tell us about parking, stairs or access
- Plan for the room to be out of bounds to pets and children
Get a quote
Most customers in Burcott get their price from pictures. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Related advice
When to call us in Burcott
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
Send us a photo if you notice any of these:
- A dull, rough surface that will not come clean
- Thin, worn enamel in places
- Brown or grey marks that don’t clean off
- A bath in a colour that no longer suits
Comparing quotes
- How soon you can use it again
- Whether cleaning and preparation are in the price
- Whether the price covers travel
- Whether a trained technician does the job
Should I try a DIY kit first?
If you are set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
Repair or replace: which is better?
Replacement only makes sense in a few cases: if the bath is cracked through, if you want a different size or shape, or if you are refitting the whole room anyway. In most other cases, resurfacing is the better choice. Our bath re-enamelling starts from £350. Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access, and doing several items at once reduces it.
Why Burcott customers choose us
- CHAS, Constructionline and SafeContractor accredited
- Every repair guaranteed for a year
- Same prices wherever you are
- Fixed prices from your photos
Take a look at our pricing and resurfacing vs replacement cost guide.
How we price bath re-enamelling
Prices start from £350. You’ll know the full cost before booking. We look at:
- Whether it’s a chip, crack, burn or wear
- How easy the damage is to reach
- The material
- Whether old repairs or coatings need taking off
A repair usually costs much less than people expect, particularly next to the cost of replacement. Send photos and we will give you the exact figure.
How to get a fixed quote
We price nearly every job from pictures. This is what we need:
- Any details about the material
- A picture taken from further back
- Natural light rather than flash
- A coin or ruler next to the damage for scale
Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and we’ll reply with a fixed price. There’s no charge for the quote and no obligation.
What we can’t put right
We would rather lose a job than do one that will not last, so these are the limits:
- A bath that’s rusted through
- Anything hidden under an old coating, until we remove it
- An acrylic bath that flexes badly underfoot
Not sure? Send photos and we will give you a straight answer before you book.
Materials we work on in Burcott
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
Places near Burcott
More services for Burcott
About our accreditations · Every repair comes with a one-year guarantee.
