Somerset · England
Bath re-enamelling & resurfacing in Henley, Somerset
Bath re-enamelling across Henley and nearby, done in a single visit in most cases.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- Lots of chips and rust spots
Bath re-enamelling in Henley without replacing anything
Re-enamelling is a one-day job for most baths, and you can use the bath the following day. Nothing is disconnected or removed. Common call-outs are for staining under the taps and around the waste and an outdated colour you’d like to change, on cast iron baths, acrylic baths and pressed steel baths.
The work is covered for a year after we finish. Just call us if there is a problem and we’ll come back.
- Area
- Henley (BA5)
- Area hub
- Somerset
- Warranty
- A year, on every repair
- Quote
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Do you need bath re-enamelling in Henley?
A dull surface stains and holds dirt, and scrubbing it wears it down further. That’s the point where re-enamelling makes sense.
Most people contact us after spotting something like this:
- Thin, worn enamel in places
- A bath that stays dull however much you clean it
- A period or roll-top bath worth keeping
- A coating lifting around the plughole
What to look for in a quote
- How soon you can use it again
- Is the price fixed, and does it include VAT?
- The length of the guarantee and what it covers
- How changes to the job are handled
Nearby places to Henley
What else we do in Henley
Repair or replace in Henley?
If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Nothing else is disturbed. Prices start from £350. Rather than charging by the hour, we price the entire job up front. It depends on the damage, the material and access.
Why us?
- One price list for the entire UK
- Accredited with CHAS, Constructionline and SafeContractor
- Fixed prices from your pictures
- Straight answers about what a repair can do
Take a look at our pricing or guide to resurfacing and replacement costs.
What affects the price in Henley
Resurfacing from £350. A fixed quote means you know the cost before booking. We take into account:
- What the surface is made of
- Doing more than one item at once
- The size and number of damaged areas
- How easy the damage is to reach
We charge the same wherever you are, so there’s no premium for Henley. What changes the price is the job itself: the material, the amount of damage and how many items.
Send pictures for a quote
When you take your photos, these tips help us give you a firm price:
- Your postcode, so we can check dates
- A coin or ruler next to the damage for scale
- Natural light rather than flash
- A wider photo showing the whole bath
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can price the job.
The process
We work cleanly and quietly. Protection goes down first, then the work takes most of the day. Before we leave, we explain how soon it can be used and how to care for it.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s usually ready the day after.
How to prepare
- Mention any parking restrictions or tricky access
- Mention if the room is upstairs or in a flat
- Point us to the nearest place to park
Ask for a price
The quickest way to a price is to send two or three photos through our quote form or call us. We’ll say immediately if a repair is the right fix.
Read more
Our work in Henley
Henley is about 1 mile west of Wells, in Somerset. Whether you are in the middle of Henley or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Henley is one of 640 places in Somerset we cover.
We cover every part of the BA5 postcode area. We also cover the places around Henley: Haybridge (1 mile east), Wookey (1 mile west), Burcott (1 mile south), Wookey Hole (1 mile north-east) and Wells (1 mile east). Within a short drive, we also cover Bridgwater (15 miles south-west), Burnham-on-Sea (14 miles west), Midsomer Norton (10 miles north-east), Shepton Mallet (6 miles east), Street (7 miles south-west) and Glastonbury (5 miles south).
Local landmarks in Henley
In Henley, that means homes near The Burcott Inn, The Blue School and The Blue School, among other places. Nearby too are Wookey Primary School (1 mile south-west) and Church of St Matthew (0.5 miles west). Well-known places in the area include Cave Museum (1.1 miles north) and Mendip Hospital (2.8 miles east). Not far away are Priddy Mineries and Pen Hill.
Questions from Henley
Can you quote from pictures?
Normally, yes. A close-up and a wider photo are enough to give a fixed quote.
Can you repair several things at once?
Yes. Doing several items on one visit usually costs less than separate visits. Include pictures of each item.
Will there be a smell?
Expect a mild smell while we’re working.
What information do you need?
A close-up, a wider photo and your postcode. Then we will agree a date.
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across Somerset.
How long does re-enamelling take?
Typically one day, with the bath ready the next day. A badly pitted bath can need a second day.
What happens after I send photos?
We look at the photos and reply with a fixed price and some dates. If anything’s unclear, we’ll ask for another photo.
How much does bath re-enamelling cost in Henley?
Prices start from £350. Every job gets a fixed price based on pictures of the damage. Send a close-up of the damage and a wider photo with your BA5 postcode.
DIY kit or professional repair?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Landlord and trade work in Henley
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
For anyone letting property in or around Henley, we’ll quote for several properties at once. Send photos for each one and we’ll price them together.
When we would advise against a repair
A few problems are outside what a surface repair can do:
- Anything hidden under an old coating, until we remove it
- An acrylic bath that flexes badly underfoot
- A cast iron or steel bath that’s cracked right through
If in doubt, send photos and we will say what we think.
What we work on
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
Materials and what they mean for the repair
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
About our accreditations · Every repair comes with a one-year guarantee.
