Cheshire East · England
Bath re-enamelling & resurfacing in Burford, Cheshire East
Damaged bath in Burford? We put it right where it is, match it on site and guarantee the work for a year.
- Resurfacing from £350
- A coloured bath you want in white
- Stains that won’t shift
Bath re-enamelling in Burford, done in place
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. If you are dealing with wear marks under the taps and an original cast iron bath that needs restoring, we can normally put it right, on pressed steel baths, cast iron baths and basins & shower trays alike.
All our work comes with our one-year guarantee, wherever you are in Cheshire East.
- Where
- Burford (CW5)
- Region
- Cheshire East
- Guarantee
- One year on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
How we price bath re-enamelling
Prices start from £350. There’s no area surcharge for Burford. What changes the price is:
- The type of damage
- Unusual colours or finishes
- Where the damage is and how we get to it
- The size and number of damaged areas
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send photos and you’ll get a fixed figure.
Send pictures for a quote
Before you send photos, a few simple things make all the difference:
- Good light, ideally daylight, without flash glare
- A photo taken from further back
- Your postcode, so we can check dates
- What it’s made of, if you know
We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
How to care for the repair
Much of the damage we repair could have been avoided. A few tips:
- Avoid suction-cup mats
- Don’t let dyes or oils sit on the finish
- Wipe the bath dry after use in hard water areas
- Store bottles off the bath
Wipe the bath dry after use where you can, and rinse off any bath products.
Don’t try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.
Also near Burford
What else we do in Burford
Can I fix it myself?
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
About Burford
Burford is about 2 miles north-west of Nantwich, in Cheshire East. Jobs in Burford are booked in like any other job: a fixed quote from photos, and a technician at your door on the day. We cover 254 places in Cheshire East. Our jobs stretch from Burford to Liverpool (about 27 miles away).
All of CW5 is within our area, from the main roads to the quietest streets. Neighbouring places we cover include Acton (1 mile south-east), Burland (1 mile south-west), Rease Heath (1 mile north-east), Swanley (1 mile south-west) and Stoneley Green (1 mile south-west). Larger places within reach include Crewe (5 miles east), Middlewich (9 miles north-east), Sandbach (9 miles north-east), Coppenhall (5 miles north-east), Holmes Chapel (12 miles north-east) and Leighton (5 miles north-east).
Around Burford
In Burford, that means homes near St Mary's Church, Acton Church of England Primary Academy and Malbank School and Sixth Form College, among other places. The nearest railway station is Nantwich station, about 2 miles south-east. Other landmarks nearby include Nantwich Castle (1.7 miles south-east) and Nantwich Workhouse (1.6 miles east).
- Other local spots include Crewe and Nantwich (3 miles east)
Repairs by material
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
The process
We begin by going over the job with you. Then the area is sheeted and masked and we start. Allow most of the day.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- The bath is left to cure and can generally be used the following day.
Getting ready for the visit
- Mention if the room is upstairs or in a flat
- Have a window or extractor fan available
- Keep a parking space free if you can
How to get a price
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Read more
Work for landlords and builders
Builders use us to fix snagging damage before handover. Several plots can be done in one visit to keep costs down.
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
What we can’t put right
Some jobs aren’t right for a repair, for example:
- Holes rusted through the metal
- Leaking taps or wastes (a plumber’s job)
- An acrylic bath that flexes badly underfoot
If in doubt, send photos and we will say what we think.
Surfaces we repair
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
- Acrylic baths
When to call us in Burford
A dull surface stains and holds dirt, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
Most people contact us after spotting one of these:
- A roll-top that is seen better days
- A peeling or bubbling previous coating
- Wear marks under the taps
- A coloured bath you want in white
What your quote should include
- How the room is protected while they work
- How soon you can use it again
- Whether the price is fixed and includes VAT
- If travel is included in the price
FAQs for Burford
What if the damage is worse than the pictures show?
If we find something the photos didn’t show, we explain it first. The price only changes if you agree.
Can I add another job to the visit?
Of course, and it normally saves money. Just add the extra items to your pictures and you will get one combined price.
Is it messy?
We protect the room with dust sheets and masking first, and tidy up before we leave.
What happens next?
You get a fixed quote and available dates. If we need another angle, we will ask.
Will there be a smell?
There can be some smell while we work. It fades as everything cures.
When can you do it?
It depends on the time of year and where you are. We will offer you dates when we send your quote.
Is a repair better than a new one?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we will tell you.
Can you resurface a pink bath in white?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
About our accreditations · Every repair comes with a one-year guarantee.
