Medway · England

Bath re-enamelling & resurfacing in Burham, Medway

Bath re-enamelling in Burham without the cost of replacing. Send us photos for a fixed price, then we come to you.

  • Resurfacing from £350
  • Chips and rust in more than one place
  • Brown or grey marks that do not clean off
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling for Burham homes

Bath re-enamelling in Burham, done in place

After re-enamelling, the bath has a smooth, glossy, new-looking surface, but without the cost and upheaval of a refit. It’s ideal if you like your bathroom but not the state of the bath. Typical jobs include staining under the taps and around the waste and several chips and rust patches, on basins & shower trays, pressed steel baths and acrylic baths.

Whatever the size of the job, you get the same one-year guarantee in Burham and across Medway.

Before and after: an old basin refinished to bright white
Where
Burham (ME1)
Region
Medway
Guarantee
One year on every repair
Quote
From £350. Free and fixed, from your photos
Call
0345 017 0787
Page updated
23 October 2026

Burham and nearby

Burham is about 3 miles south-west of Chatham, in Medway. Jobs in Burham are booked in like any other job: a fixed quote from pictures, and a technician at your door on the day. Burham is one of 68 places in Medway we cover. Our nearest city page is London, about 27 miles away.

Our repair technicians cover all of the ME1 postcode area. From New Road, St Mary's Walk and Brisley's Row or a nearby road, we can come to you. Nearby, we also work in Scarborough (1 mile north-west), Eccles (1 mile south), Peters Village (1 mile north-west), Holborough (2 miles west) and Wouldham (2 miles north-west). Larger places within reach include Gillingham (5 miles north-east), Chatham (3 miles north-east), Rochester (4 miles north), Rainham (6 miles east), Strood (4 miles north) and Luton (4 miles north-east).

Around Burham

We visit homes around The Holmesdale School, Burham Marsh and Burham Church of England Primary School, among other places. Other local landmarks include St Mary's Church (0.7 miles west) and The Windmill pub (under half a mile north). Burham’s nearest station is Snodland station, about 1.3 miles west of the centre. Further afield, we also cover the area around St. Catherine's Hospital (3.8 miles north) and Medway megaliths (1.3 miles south-east). The countryside around Burham includes Burham Down and Blue Bell Hill.

Map of Burham © OpenStreetMap contributors

Work for landlords and builders

Builders use us to fix snagging damage before handover. We can visit several plots in one trip to keep costs down.

We carry out planned and one-off repairs for housing associations and facilities teams in Medway and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.

When to call us in Burham

Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.

Typical reasons for a call-out include:

  • An original cast iron bath that needs restoring
  • A dull, rough surface that will not come clean
  • Wear marks under the taps
  • Brown or grey marks that do not clean off

What to look for in a quote

  • Is the price fixed, and does it include VAT?
  • What the guarantee covers, and for how long
  • Aftercare advice
  • Whether they match the colour on site

10 questions to ask before you book

Different materials, different repairs

Roll-top and period baths

We can resurface a roll-top inside and out, with the outside refinished as well.

Pressed steel

Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we check it carefully.

What affects the price in Burham

Prices start from £350. There are no hourly rates or hidden extras. The price depends on:

  • Whether it’s a chip, crack, burn or wear
  • How hard the colour is to match
  • Any earlier repairs that need removing first
  • Whether we combine several jobs

Every job is a little different, so we price each one individually. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.

Getting a price from pictures

Photographing the damage takes a minute, and it saves a visit. Try to send:

  • The material, if you know it
  • A clear, close picture of the problem area
  • Natural light rather than flash
  • Something in shot to show the size

Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them over. You will get a fixed price, not an estimate.

How the visit works

It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, then carry out the work, which generally takes a full day. If anything looks different from your photos, we’ll talk to you before going ahead.

  1. We check the bath and agree the finish with you.
  2. Everything around the bath is masked and covered.
  3. We degrease the bath, fix any damage and key the surface.
  4. We apply the primer and then the finish coats.
  5. We remove the masking, tidy up and give you the curing time.

Getting ready for the visit

  • Have somewhere for us to park nearby if possible
  • Tell us if there are stairs or a lift
  • Mention any parking restrictions or tricky access

Ask for a price

Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can price the job the same day in most cases.

Get a fixed quote

Related advice

Can I fix it myself?

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

Why repair rather than replace?

Replacing the bath means a plumber, lifting out the old bath, making good the walls and tiles and several days without a working bathroom. Re-enamelling renews the entire surface without moving it. Resurfacing from £350, with every job priced individually. The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed quote from your photos, so there are no surprises on the day.

Why book with us

  • Dust sheets down, tidy finish
  • Work done at your home or business
  • Every repair guaranteed for a year
  • Straight answers about what a repair can do

Take a look at our prices page and guide to resurfacing and replacement costs.

Your questions about bath re-enamelling in Burham

How soon can you come?

Your quote comes with available dates. Tell us if you need it done quickly.

Can you re-enamel a roll-top bath?

Yes. We can do the inside and outside if you’d like.

Is there any odour?

Some materials have a smell while they’re applied. It fades as everything cures.

What areas do you cover?

We work UK-wide. Our prices are the same everywhere.

How long does re-enamelling take?

Typically one day, with the bath ready the day after. Deeply pitted baths may need a second day.

Can you repair something that’s been repaired before?

In most cases. We remove the old repair before doing a new one, so let us know about it.

Will the new finish last?

A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.

Do you charge for travel?

There’s no separate call-out charge. Your fixed price includes everything.

What a repair can’t fix

To be straight with you, there are a few things a repair will not fix:

  • Leaks from fittings rather than the bath
  • A bath split right through the body
  • Acrylic that moves when you stand in it

Send us photos and we’ll tell you honestly before booking.

Materials we work on in Burham

  • Cast iron baths
  • Basins & shower trays
  • Acrylic baths
  • Pressed steel baths
  • Victorian roll-tops
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.