Hampshire · England
Bath re-enamelling & resurfacing in Burley, Hampshire
Bath re-enamelling across Burley and nearby, done in a single visit in most cases.
- Resurfacing from £350
- A dull, rough surface that won’t come clean
- Chips and rust in more than one place
Prices and what affects them
Prices start from £350. We price every job individually. What matters most is:
- How many areas need work
- What kind of damage it is
- Unusual colours or finishes
- How easy the damage is to reach
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.
Getting a price from pictures
Before you send pictures, these tips help us give you a firm price:
- A picture taken from further back
- A clear, close picture of the problem area
- Whether it’s been repaired or coated before
- Something in shot to show the size
A quote takes minutes to ask for: photograph the damage, then the entire bath, include your postcode and send them over. You’ll get a fixed price, not an estimate.
About our bath re-enamelling in Burley
After re-enamelling, the bath has a smooth, glossy, new-looking surface, without any of the disruption of replacing it. It’s ideal if you like your bathroom but not the state of the bath. Common call-outs are for a coloured bath you want in white and thin, worn enamel in places, on basins & shower trays, pressed steel baths and acrylic baths.
All our work is covered by a one-year guarantee, wherever you are in Hampshire.
- Area
- Burley (BH24)
- Region
- Hampshire
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Signs you need bath re-enamelling in Burley
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
Customers usually contact us about:
- A bath in a colour that no longer suits
- A coating lifting around the plughole
- Brown or grey marks that don’t clean off
- Chips and rust in more than one place
What to look for in a quote
- How soon you can use it again
- What happens if they find more damage
- What aftercare is recommended
- Whether the price is fixed and includes VAT
Repair or replace in Burley?
A replacement often means several trades over several days. Re-enamelling is one technician, generally one day, with the bath back in use the following day. Prices start from £350. We charge the same wherever you are, with no extra for Burley. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Why book with us
- Rooms protected and left tidy
- We will tell you if it’s not worth repairing
- Nothing taken out or refitted
- Free fixed quotes from pictures
Take a look at our pricing and resurfacing vs replacement cost guide.
Burley and the surrounding area
Burley is about 6 miles north of Christchurch, in Hampshire. Anywhere in BH24, a technician comes to you. Burley is one of 683 places in Hampshire where we work.
We cover every part of BH24. From The Mall, The Cross and Doveys Close or a nearby road, we can come to you. Nearby, we also work in Burley Street (1 mile north-west), Bagnum (2 miles west), Foulford (2 miles north-west), Crow (3 miles west) and Forest Corner (3 miles north-west). We also work in nearby towns such as Totton (11 miles north-east), Lymington (8 miles south-east), Romsey (15 miles north-east), Hythe (13 miles east), New Milton (5 miles south) and Ringwood (4 miles west).
Local landmarks in Burley
In Burley, that means homes near The Burley Inn, Church of St John the Baptist and Burley Primary School and the streets around them. The closest station to Burley is Sway station, roughly 5 miles south-east. Green spaces nearby include Blashford Lakes and Linbrook Lake.
What your bath is made of matters
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.
Nearby places to Burley
Also in Burley
Honest limits
A few problems are outside what a surface repair can do:
- Leaks from fittings rather than the bath
- An acrylic bath that flexes badly underfoot
- Anything hidden under an old coating, until we remove it
Not sure? Send photos and we’ll give you a straight answer before booking.
Materials we repair
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
Questions from Burley
Do you cover Burley?
Yes, we do. We send a technician to Burley for every job, and the price is the same as everywhere else.
How long does re-enamelling take?
Most baths are done in a day, ready the next day. We will confirm timings when we quote.
Can I add another job to the visit?
Yes. Doing several items on one visit normally costs less than separate visits. Send photos of everything you’d like done.
Will there be a smell?
Expect a mild smell while we’re working that clears as it cures.
Will there be fumes?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
What happens next?
You get a fixed price and available dates. If anything’s unclear, we’ll ask for another photo.
Is it OK to have pets in the house?
Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.
Do you cover the entire of Hampshire?
We cover the whole UK, including Burley and the rest of Hampshire. Send your postcode with your photos and we will offer you dates.
DIY repairs versus a professional job
If you are set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Aftercare tips
Aftercare is simple:
- Don’t let dyes or oils sit on the finish
- Dry the bath after use to stop limescale
- Do not leave a chip unrepaired
- Respect the curing time we give you
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Fix dripping taps quickly.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.
How the visit works
On the day itself, there’s little for you to do. Let us in and show us the room, and we’ll get on with it. The job generally runs to a full day, including clearing up.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s typically ready the next day.
Preparing for the visit
- Tell us about any previous repairs or coatings
- Plan for the room to be out of bounds to pets and children
- Have a window or extractor fan available
Get a quote
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed quote the same day in most cases.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
