Shropshire · England
Bath Re-enamelling for Burleydam homes
Local bath re-enamelling for Burleydam: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- Brown or grey marks that do not clean off
- Worn patches where water runs and sits
Bath re-enamelling at your home in Burleydam
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. We regularly repair cast iron baths, pressed steel baths and Victorian roll-tops, and people most often call us about a bath that stays dull however much you clean it and an original cast iron bath that needs restoring.
Every repair comes with a one-year guarantee, wherever you are in Shropshire.
- Location
- Burleydam (SY13)
- County
- Shropshire
- Warranty
- One year on every repair
- Price
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Why repair rather than replace?
A new bath means a plumber, removing a heavy bath, making good the walls and tiles and days without a bathroom. Resurfacing renews the whole surface with the bath left where it is. Prices start from £350. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you will get a fixed figure.
Why us?
- Work done at your home or business
- Dust sheets down, tidy finish
- Same prices wherever you are
- We’ll tell you if it’s not worth repairing
Take a look at our pricing or bath cost comparison.
How it works
We work cleanly and quietly, so you can stay at home while we are there. We protect the area first, then the work takes most of the day. At the end we talk you through how soon it can be used and how to care for it.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Clear the area around the damage
- Point us to the nearest place to park
- Tell us about any previous repairs or coatings
How to get a price
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed quote the same day in most cases.
Advice
Different materials, different repairs
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is what we repair.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
What we’re called out for in Burleydam
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
Most people get in touch when they notice one of these:
- Enamel that’s lost its shine and feels rough
- A peeling or bubbling previous coating
- Stains that won’t shift
- Wear marks under the taps
Before you book anyone
- How soon you can use it again
- How the room is protected while they work
- How long the guarantee is and what it covers
- What prep work is covered
What a repair can’t fix
We will not take on work that will not last, so these are the limits:
- Anything hidden under an old coating, until we remove it
- An acrylic bath that flexes badly underfoot
- A bath that is rusted through
Send us pictures and we’ll tell you honestly.
Materials we repair
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
- Acrylic baths
Prices and what affects them
Prices start from £350. We price every job individually. What matters most is:
- Where the damage is and how we get to it
- The material and finish
- The size and number of damaged areas
- What kind of damage it is
The price reflects the work involved, not your postcode. The full price is agreed before you book, with no extras added later.
Quotes from your pictures
We price nearly every job from pictures. This is what we need:
- The material, if you know it
- A wider photo showing the entire bath
- Good light, ideally daylight, without flash glare
- A clear, close picture of the problem area
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Questions from Burleydam
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
How do I get a price for bath re-enamelling in Burleydam?
Prices start from £350. We give a fixed quote from your photos. Send a close-up of the damage and a wider photo with your SY13 postcode.
What happens if you find more damage?
Your quote covers the damage in the photos. Anything extra is discussed before we begin.
Do you charge for travel?
No. Our quotes include travel, and we charge the same wherever you are.
Is there any odour?
A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.
How long is the bath unusable?
Usually a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
Can I add another job to the visit?
Yes. Doing several items on one visit usually costs less than separate visits. Include photos of each item.
DIY repairs versus a professional job
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
Nearby places to Burleydam
More services for Burleydam
About Burleydam
Burleydam is about 6 miles north-west of Market Drayton, in Shropshire. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Our technicians cover all 433 towns and villages across Shropshire, from the larger towns to small villages. Our jobs stretch from Burleydam to Liverpool (33 miles away).
Our repair technicians cover all of SY13. From Whitchurch Road, Dodd's Green Lane and Lodmore Lane or a nearby road, we can come to you. We also travel to Dodd's Green (1 mile north), Barnett Brook (1 mile north-east), Lightwood Green (2 miles east), Brown's Bank (2 miles east) and Swanbach (3 miles east). We also work in nearby towns such as Market Drayton (6 miles south-east), Whitchurch (4 miles west), Wem (10 miles south-west), Ellesmere (14 miles west), Loggerheads (9 miles south-east) and Shawbury (14 miles south).
What’s near Burleydam
Typical jobs here are in homes near The Combermere Arms and St Mary's and St Michael's Church and the streets around them. For rail, the closest station is Wrenbury station, about 2.8 miles north of the centre. Further afield, we also cover the area around Whitchurch Community Hospital (3.9 miles west). For a walk, there’s Prees Heath Common.
Landlord and trade work in Burleydam
Builders use us to fix snagging damage before handover. Several plots can be done in one visit.
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
About our accreditations · Every repair comes with a one-year guarantee.
