Cheshire East · England
Bath Re-enamelling for Barnett Brook homes
Bath re-enamelling for Barnett Brook, without a refit. Send us photos for a fixed quote, then we come to you.
- Resurfacing from £350
- An old resurfacing that’s failing
- A dull, rough surface that won’t come clean
Bath re-enamelling in Barnett Brook without replacing anything
Re-enamelling gives a worn bath a new glossy surface without taking anything out. It suits baths that are dull, stained, rough or chipped all over. If you’re dealing with an original cast iron bath that needs restoring and an outdated colour you’d like to change, we can help, on cast iron baths, basins & shower trays and acrylic baths alike.
All our work comes with our one-year guarantee, wherever you are in Cheshire East.
- Area
- Barnett Brook (CW5)
- Region
- Cheshire East
- Cover
- One year on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
When to call us in Barnett Brook
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
The most common problems we are called about are:
- A period or roll-top bath worth keeping
- Thin, worn enamel in places
- A dull, rough surface that will not come clean
- Stains that won’t shift
What to look for in a quote
- A fixed quote, and whether VAT is included
- Whether there are any call-out or travel charges
- How long the guarantee is and what it covers
- What happens if they find more damage
Looking after it afterwards
So the finish stays in good condition for years:
- Leave the bath for the full curing time before using it
- Dry the bath after use to stop limescale
- Get any chip repaired quickly
- Wash away dyes and oils after use
Wipe the bath dry after use where you can, especially in hard water areas, and rinse away any product left on the surface.
Don’t try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.
Different materials, different repairs
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we pay close attention there.
Landlord and trade work in Barnett Brook
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
If you manage property in Barnett Brook, we can repair and quote for several addresses together. Just send photos for each address and we will price them together.
Barnett Brook: your questions answered
Can tenants book a repair?
Yes. Ask your landlord first, and we can send them the quote if that helps.
Is a repair better than a new one?
Generally, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we’ll tell you.
Do you work in Barnett Brook?
We do. We send a technician to Barnett Brook for every job, and the price is the same as everywhere else.
Do you resurface freestanding baths?
Yes, often. The inside is resurfaced, and we can refinish the outside as well.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
How do I get a price for bath re-enamelling in Barnett Brook?
Prices start from £350. We give a fixed price from your photos. Send a close-up of the damage and a wider photo with your CW5 postcode.
What areas do you cover?
Across the UK, and that includes Barnett Brook. Prices don’t change with location.
Can you change the colour of my bath?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
Also near Barnett Brook
Also in Barnett Brook
Where we work around Barnett Brook
Barnett Brook is about 5 miles south of Nantwich, in Cheshire East. Wherever you are in the CW5 postcode area, a technician comes to you. Our technicians cover all 254 towns and villages in Cheshire East, from the larger towns to small villages. Our jobs stretch from Barnett Brook to Liverpool (32 miles away).
Jobs in CW5 work the same way as everywhere else we cover. If you are just outside Barnett Brook, we cover Dodd's Green (1 mile west), Burleydam (1 mile south-west), Lightwood Green (1 mile south-east), Brown's Bank (2 miles south-east) and Swanbach (2 miles south-east). Within a short drive, we also cover Crewe (9 miles north-east), Nantwich (5 miles north), Middlewich (14 miles north), Sandbach (13 miles north-east), Coppenhall (9 miles north-east) and Leighton (10 miles north-east).
Near you in Barnett Brook
The nearest railway station is Wrenbury station, roughly 2.1 miles north-west of the centre. Well-known places in the area include Whitchurch Community Hospital (4.9 miles west).
What happens on the day
We begin by going over the job with you. Next, we cover and mask everything nearby and we start. It normally takes most of the day, and we’ll tell you if anything changes.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can normally be used the day after.
Getting ready for the visit
- Keep children and pets away from the room on the day
- Open a window if you can
- Keep a parking space free if you can
Get a quote
Email us photos of the damage and a wider shot of the entire item, with your CW5 postcode, and we will come back with a fixed quote.
Read more
When we would advise against a repair
Some jobs aren’t right for a repair, for example:
- Leaking taps or wastes (a plumber’s job)
- Anything hidden under an old coating, until we remove it
- Acrylic that moves when you stand in it
If in doubt, send pictures and we will say what we think before you book.
Materials we repair
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
Repair or replace: which is better?
A new bath means a plumber, removing a heavy bath, re-tiling or making good the walls and several days without a working bathroom. Resurfacing renews the whole surface with the bath left where it is. Our bath re-enamelling starts from £350. We do not add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
What you get with us
- Colour mixed on the day to match
- One price list for the entire UK
- Most jobs done in one visit
- Work done at your home or business
Read our prices page and resurfacing vs replacement cost guide.
DIY repairs versus a professional job
If you are set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
About our accreditations · Every repair comes with a one-year guarantee.
