Powys · Wales
Bath re-enamelling & resurfacing in Burlingjobb, Powys
Full bath re-enamelling and resurfacing in Burlingjobb, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Enamel that’s lost its shine and feels rough
- An original cast iron bath that needs restoring
About our bath re-enamelling in Burlingjobb
Most baths are re-enamelled in a day, with the bath ready to use the following day. Nothing is disconnected or removed. Common call-outs are for a peeling or bubbling previous coating and enamel that’s lost its shine and feels rough, on pressed steel baths, basins & shower trays and cast iron baths.
We stand behind the work with a one-year guarantee, so you’re covered after the visit.
- Where
- Burlingjobb (LD8)
- County
- Powys
- Cover
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
The process
Your technician turns up at the time we agreed with you and checks the damage against your photos first. The floor and nearby surfaces are covered before any work starts. Most visits take the best part of a day, and we leave the room as we found it.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can usually be used the next day.
Preparing for the visit
- Keep a parking space free if you can
- Open a window if you can
- Tell us about parking, stairs or access
How to get a price
The quickest way to a price is to send a couple of pictures through our quote form or ring us. We will tell you honestly whether it can be repaired.
Advice
Towns and villages near Burlingjobb
More services for Burlingjobb
When to call us in Burlingjobb
Previous coatings can fail too, peeling around the waste or bubbling. We strip what’s failing and start again.
The most common problems we’re called about are:
- Several chips and rust patches
- A bath in a colour that no longer suits
- A coating lifting around the plughole
- A roll-top that’s seen better days
Comparing quotes
- What protection goes down before work starts
- Whether cleaning and preparation are in the price
- Whether they match the colour on site
- How changes to the job are handled
Keeping it looking good
How the surface is treated afterwards matters. Here’s what we suggest:
- Use washing-up liquid and a soft cloth
- Repair dripping taps early
- Keep toiletries on a shelf rather than in the bath
- Get any chip repaired quickly
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
Rust spots on a worn bath get worse with time. Resurfacing before they spread keeps it simpler.
Where we work around Burlingjobb
Burlingjobb is about 15 miles west of Leominster, in Powys. From the centre of Burlingjobb to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Our repair technicians cover 234 places across Powys. Our nearest city page is Birmingham, about 54 miles away.
Here we cover the LD8 postcode area. Neighbouring places we cover include Evenjobb (3 miles north), Bradnor Green (3 miles east), Kington (3 miles east), Sunset (3 miles east) and Slough (5 miles north-east). Within a short drive, we also cover Llandrindod Wells (12 miles west), Knighton (9 miles north), Llanfair-ym-Muallt (14 miles west) and Llanelwedd (13 miles west).
What’s near Burlingjobb
Our clients here include homes close to The Harp Inn and St Stephen's Church, among other places. Other landmarks nearby include Kington Museum and History Centre (3 miles east) and Old Radnor Castle (less than half a mile north). The countryside around Burlingjobb includes Birches Farm and Hindwell Pool.
- Other local spots include Harpton and Wolfpits (2.6 miles west)
Why repair rather than replace?
Getting a cast iron bath out is hard work: they’re heavy, frequently need breaking up, and a new one isn’t cheap. Re-enamelling avoids all of it. Resurfacing from £350, with every job priced individually. The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed quote from your photos, so there are no surprises on the day.
Why book with us
- Rooms protected and left tidy
- A fixed quote before you book
- Everything repaired in place
- Work done at your home or business
See our pricing or resurfacing vs replacement cost guide.
Your questions about bath re-enamelling in Burlingjobb
How long does re-enamelling take?
Usually a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
Does the bath have to be removed?
No. We resurface it in place, so the tiles and taps stay put.
How durable is a resurfaced bath?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Do you cover Burlingjobb?
Yes. We cover the entire UK and travel to Burlingjobb. Send us pictures for a fixed quote, or call 0345 017 0787.
Can you quote from photos?
Normally, yes. Clear pictures let us give you a fixed quote without visiting.
What does bath re-enamelling cost?
Prices start from £350. Every job gets a fixed quote from your pictures. Send a close-up and a picture of the entire item with your LD8 postcode.
What areas do you cover?
The entire UK, including all of Powys. Send your postcode with your pictures and we will confirm dates.
What information do you need?
Some pictures, your postcode and how to reach you. On the day, access to the room.
Different materials, different repairs
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
How we price bath re-enamelling
Prices start from £350. There’s no charge for travel to Burlingjobb. The price comes down to:
- How easy the damage is to reach
- How hard the colour is to match
- What the surface is made of
- The size and number of damaged areas
Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.
Send photos for a quote
Phone photos are fine, there is no need for anything special. Make sure they show:
- One picture of the whole bath
- What it’s made of, if you know
- Any earlier repairs or coatings
- A clear, close picture of the problem area
If you’re in Burlingjobb and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
What a repair cannot fix
Before you book, it’s worth knowing the limits too:
- Steel that has corroded right through
- A metal bath with a through crack
- Leaking taps or wastes (a plumber’s job)
If in doubt, send photos and we’ll say what we think before booking.
What we work on
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
About our accreditations · Every repair comes with a one-year guarantee.
