North Yorkshire · England
Bath Re-enamelling for Burneston homes
Bath re-enamelling for Burneston, without a refit. Get a fixed price from your photos, then we come to you.
- Resurfacing from £350
- Enamel that is lost its shine and feels rough
- Chips and rust in more than one place
When a repair is not the answer
We will not take on work that won’t last, so here’s what a repair can’t put right:
- Damage hidden under a previous coating, until it’s stripped back
- A poorly supported acrylic bath, until it’s firmed up
- Steel that has corroded right through
If in doubt, send pictures and we will say what we think before booking.
Materials we work on in Burneston
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
- Cast iron baths
Bath re-enamelling at your home in Burneston
We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. We’re frequently asked to fix a coloured bath you want in white and a bath that stays dull however much you clean it, in Victorian roll-tops, basins & shower trays and acrylic baths.
You’re covered for a year from the day of the repair. If anything isn’t right, ring us and we’ll sort it.
- Area
- Burneston (DL8)
- Area hub
- North Yorkshire
- Warranty
- One year on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Common questions in Burneston
Do you need to take the bath out?
No. We resurface it in place, so the tiles and taps stay put.
How soon can you come?
It depends on the time of year and where you are. We will offer you dates when we send your quote.
Is there a guarantee?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Can you do the outside of a roll-top?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
Is there a call-out fee?
There is no separate call-out charge. The fixed price covers the visit and the work.
Do you do work for letting agents?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Which areas do you work in?
We work UK-wide, and that includes Burneston. Our prices are the same everywhere.
Repair or replace: which is better?
Replacing a bath can take several days across several trades. Re-enamelling is one technician, typically one day, with the bath back in use the following day. Prices start from £350. No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Why us?
- We leave the room as we found it
- No extra charge for your area
- CHAS, Constructionline and SafeContractor accredited
- Free fixed quotes from pictures
See our pricing or guide to resurfacing and replacement costs.
What your bath is made of matters
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
DIY repairs versus a professional job
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.
A DIY attempt is not a disaster. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.
How it works
We turn up when we said we would and checks the damage against your photos first. The floor and nearby surfaces are covered before any work starts. Most visits take the best part of a day, and we leave the room as we found it.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
Getting ready for the visit
- Keep pets and children out of the room while we work
- Tell us about any previous repairs or coatings
- Move bottles, mats and clutter away from the area
Getting a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them to us. What comes back is a fixed quote, not a guess.
Read more
About Burneston
Burneston is about 7 miles south-west of Northallerton, in North Yorkshire. Our technicians come to homes and businesses in Burneston and nearby villages, so nothing has to leave your home. We work in all 626 towns and villages in North Yorkshire, from the larger towns to small villages. Our nearest city page is Leeds, about 31 miles away.
Our repair technicians cover all of the DL8 postcode area. Streets in the area include Manor House Walk, Back Lane and Hartley Vale, all of which we cover. Nearby, we also work in Carthorpe (1 mile south), Exelby (1 mile north-west), Londonderry (2 miles north), Leeming (2 miles north) and Kirklington (2 miles south). Larger places within reach include Ripon (9 miles south), Catterick Garrison (11 miles north-west), Northallerton (7 miles north-east), Richmond (13 miles north-west), Thirsk (8 miles east) and Colburn (10 miles north-west).
Landmarks near Burneston
Around Burneston, we work in homes near Burneston Church of England Voluntary Aided Primary School and Church of St Lambert and the streets around them. Nearby you’ll also find Snape Castle (2.9 miles west) and Bedale Museum (3.4 miles north-west).
Landlords, agents and businesses in Burneston
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
If you manage property in Burneston, we’ll quote for several properties at once. Just send pictures for each address and we’ll price them together.
Places near Burneston
More services for Burneston
Do you need bath re-enamelling in Burneston?
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
Common reasons people in Burneston contact us are:
- A roll-top that’s seen better days
- Thin, worn enamel in places
- A coloured bath you want in white
- A coating lifting around the plughole
Comparing quotes
- What preparation is included
- How long it needs to cure
- What protection goes down before work starts
- What aftercare is recommended
How we price bath re-enamelling
Resurfacing from £350. You’ll know the full cost before booking. We take into account:
- What kind of damage it is
- How many items we do on one visit
- Whether old repairs or coatings need taking off
- The material and finish
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.
Getting a price from photos
Most quotes are done from pictures alone. To make it quick:
- Daylight if possible, and no flash reflection
- Details of any past repairs
- A coin beside the damage so we can judge size
- One sharp close-up of the damage
For a price in Burneston, the easiest route is pictures: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
About our accreditations · Every repair comes with a one-year guarantee.
