North Tyneside · England
Bath Re-enamelling in Burradon
Bath re-enamelling in and around Burradon: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Several chips and rust patches
- An original cast iron bath that needs restoring
Bath re-enamelling in Burradon without replacing anything
The bath stays where it is, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, with the bath ready to use the following day. We regularly repair acrylic baths, basins & shower trays and pressed steel baths, and common reasons people get in touch are a bath in a colour that no longer suits and chips and rust in more than one place.
We stand behind the work with a one-year guarantee.
- Where
- Burradon (NE12, NE23)
- Area hub
- North Tyneside
- Guarantee
- One year on every repair
- Price
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Where we work around Burradon
Burradon is about 1 mile north of Killingworth, in North Tyneside. We visit clients in Burradon and the surrounding area, so you don’t need to take anything anywhere. Burradon is one of 30 places in North Tyneside we cover.
Every address in NE12 and NE23 is covered, from the main roads to the quietest streets. Whether you live on Burradon Road, Havanna and Kirkwood or a nearby road, a technician can come to you. Close by, we cover Camperdown (1 mile south-west), Killingworth (1 mile south), Annitsford (1 mile north), Dudley (1 mile north-west) and Killingworth Village (1 mile south). Within a short drive, we also cover Tynemouth (5 miles south-east), Wallsend (4 miles south-east), Whitley Bay (4 miles east), North Shields (6 miles south-east), Cullercoats (6 miles east) and Chirton (5 miles south-east).
Around Burradon
We visit homes around Burradon Community Primary School, Bridge pub and Church of the Good Shepherd. Nearby too are George Stephenson High School (1 mile south) and Gosforth Park (1.9 miles south-west). The nearest railway station is Seaton Delaval station, about 2.3 miles north-east. Well-known places in the area include Silverlink Shopping Park (4 miles south-east) and Northumbria Specialist Emergency Care Hospital (1.8 miles north). The countryside around Burradon includes Bent Hill and Big Waters.
- Other local spots include Longbenton Urban District (1.9 miles south)
Looking after it afterwards
Most damage we see is avoidable. These habits help:
- Wash away dyes and oils after use
- Get any chip repaired quickly
- Keep toiletries on a shelf rather than in the bath
- Fix dripping taps quickly
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
Places near Burradon
Other services in Burradon
Materials and what they mean for the repair
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel often rusts by the plughole, so we check it carefully.
When a repair isn’t the answer
Not everything can be repaired, and we’d rather say so up front. We can’t fix:
- Problems we can’t see until an old finish comes off
- Leaking taps or wastes (a plumber’s job)
- Acrylic that moves when you stand in it
If in doubt, send photos and we’ll say what we think before you book.
Materials we repair
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
What we do, step by step
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, then carry out the work, which normally takes the best part of a day. If anything looks different from your photos, we’ll talk to you before going ahead.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can generally be used the following day.
Preparing for the visit
- Have somewhere for us to park nearby if possible
- Keep pets and children out of the room while we work
- Clear toiletries, mats and anything else from around the area
Getting a price
There is no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Read more
Burradon: your questions answered
Can tenants book a repair?
Yes. Check with your landlord; we can send the quote to them too.
How long does re-enamelling last?
Care for it and it lasts. Avoid abrasive cleaners and suction mats.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
Do I have to be there?
Yes. We need access to the room while we work, at a time we agree with you.
Is it safe with children and pets around?
Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.
Will the price change on the day?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
How do I book?
Just pictures, your postcode and a contact number. On the day, we only need access to the room.
Do you cover Burradon?
We do. Repair technicians travel to Burradon from across the region, with no extra charge for travel.
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
What affects the price in Burradon
Resurfacing from £350. We price every job individually, from your photos. What matters most is:
- The material and finish
- Whether we combine several jobs
- The size and number of damaged areas
- Access to the area
We don’t add extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Getting a price from photos
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- Daylight if possible, and no flash reflection
- A wider photo showing the entire bath
- The postcode, so we can plan the visit
- A coin beside the damage so we can judge size
We price from photos so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
Should you replace it?
Replacement only makes sense in a few cases: if the bath is cracked through, if you want a different size or shape, or if you’re refitting the entire room anyway. Otherwise, resurfacing typically wins. Prices start from £350. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
Why us?
- Accredited with CHAS, Constructionline and SafeContractor
- Work done at your home or business
- Normally one visit, start to finish
- No extra charge for your area
Read our pricing or bath cost comparison.
What we are called out for in Burradon
Older baths often have several problems at once: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
Send us a picture if you notice any of these:
- A bath in a colour that no longer suits
- A peeling or bubbling previous coating
- A dull, rough surface that won’t come clean
- Chips and rust in more than one place
What to look for in a quote
- How the room is protected while they work
- When it can be used again
- What preparation is included
- Whether they match the colour on site
About our accreditations · Every repair comes with a one-year guarantee.
