East Riding of Yorkshire · England
Bath re-enamelling & resurfacing in Bursea, East Riding of Yorkshire
Full bath re-enamelling and resurfacing in Bursea, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- A coating lifting around the plughole
- Chips and rust in more than one place
Bath re-enamelling in Bursea, done in place
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. Our repair technicians work on acrylic baths, cast iron baths and basins & shower trays, and common reasons people get in touch are an outdated colour you’d like to change and lots of chips and rust spots.
Every repair is covered by a one-year guarantee, wherever you are in East Riding of Yorkshire.
- Location
- Bursea (YO43)
- County
- East Riding of Yorkshire
- Warranty
- One year on every repair
- Price
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Repairs by material
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Covering Bursea
Bursea is about 6 miles south-west of Market Weighton, in East Riding of Yorkshire. We agree a date that works for you, and you will know when to expect us, so you are not left waiting in all day. Bursea is one of 299 places in East Riding of Yorkshire where we work. Our nearest city page is Leeds, about 32 miles away.
Here we cover the YO43 postcode area. We also travel to Hive (2 miles south-east), Sandholme (2 miles south-east), Eastrington (2 miles south), Newland (3 miles south) and Gilberdyke (3 miles south-east). Within a short drive, we also cover Beverley (15 miles east), Goole (7 miles south-west), Pocklington (9 miles north), Hessle (14 miles east), Cottingham (15 miles east) and Market Weighton (6 miles north-east).
Near you in Bursea
The nearest railway station is Eastrington station, about 2.7 miles south of the centre. The countryside around Bursea includes North Cave Wetlands.
What affects the price in Bursea
Prices start from £350. Prices are worked out job by job, from your photos. What matters most is:
- Doing more than one item at once
- How much damage there is
- Previous DIY repairs that have to come out
- What kind of damage it is
Set against the cost of replacement, repairing generally costs far less, because there is no removal, plumbing or making good. The quote lists exactly what you are paying for.
Quotes from your pictures
Phone pictures are fine, there is no need for anything special. Just make sure we can see:
- The material, if you know it
- A coin beside the damage so we can judge size
- A photo taken from further back
- A clear, close picture of the problem area
You do not need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.
Honest limits
A repair is not always the answer, and we will tell you before we start. Repairs will not solve:
- Leaking taps or wastes (a plumber’s job)
- An acrylic bath that flexes badly underfoot
- A cast iron or steel bath that’s cracked right through
Not sure? Send pictures and we will give you a straight answer.
Surfaces we repair
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
- Basins & shower trays
Looking after it afterwards
A little care keeps the finish looking good. We recommend:
- Rinse off hair dye, oils and bath bombs straight away
- Keep suction mats out of the bath
- Clean with a soft cloth and mild detergent
- Don’t leave bottles, razors or sponges standing on the surface
Stick to mild, non-abrasive cleaners, don’t use suction bath mats, and keep bottles and razors off the surface.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Should you replace it?
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Resurfacing from £350, with every job priced individually. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.
What you get with us
- Rooms protected and left tidy
- Technicians who travel to you, UK-wide
- Nothing taken out or refitted
- CHAS and Constructionline accredited
Read our pricing or resurfacing vs replacement cost guide.
The process
Arrival times are agreed in advance, so you know when to expect us. Once we are there, the work takes most of the day for most jobs. The room is left tidy and you will know when it can be used.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Plan for the room to be out of bounds to pets and children
- Tell us about any previous repairs or coatings
- Clear toiletries, mats and anything else from around the area
Get a quote
Send us photos of the damage and a wider shot of the whole item, with your YO43 postcode, and we’ll reply with a fixed price.
Related advice
Common questions in Bursea
Is it OK to have pets in the house?
Please keep children and pets out of the room during the visit and until it has cured. The rest of the house is unaffected.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
Do you come to Bursea?
Yes. We cover the entire UK and come to Bursea. Send us pictures for a fixed quote, or call 0345 017 0787.
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
Can a failed resurfacing be redone?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Can you change the colour of my bath?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
What happens next?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
Does someone need to be in?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Signs you need bath re-enamelling in Bursea
A dull surface stains and holds dirt, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
Send us a photo if you notice any of these:
- Worn patches where water runs and sits
- A peeling or bubbling previous coating
- Brown or grey marks that do not clean off
- A period or roll-top bath worth keeping
Questions to ask before booking
- Whether the price is fixed and includes VAT
- What the guarantee covers, and for how long
- Whether a trained technician does the job
- How long it needs to cure
Also near Bursea
Also in Bursea
For landlords and businesses
We carry out planned and one-off repairs for housing associations and facilities teams in East Riding of Yorkshire and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
For anyone letting property in or around Bursea, we can repair and quote for several addresses together. Send photos for each one and we’ll price them together.
About our accreditations · Every repair comes with a one-year guarantee.
