North Yorkshire · England
Bath re-enamelling & resurfacing in Burtersett, North Yorkshire
Full bath re-enamelling and resurfacing in Burtersett, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Worn patches where water runs and sits
- A bath in a colour that no longer suits
What a repair cannot fix
We’d rather lose a job than do one that will not last, so here’s what a repair can’t put right:
- Acrylic that moves when you stand in it
- Problems we cannot see until an old finish comes off
- A cast iron or steel bath that is cracked right through
Not sure? Send pictures and we’ll give you a straight answer.
What we work on
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
- Acrylic baths
- Pressed steel baths
How we handle bath re-enamelling in Burtersett
After re-enamelling, the bath has a smooth, glossy, new-looking surface, without any of the disruption of replacing it. It’s ideal if you like your bathroom but not the state of the bath. We work on acrylic baths, basins & shower trays and pressed steel baths, and people most often call us about a dull, rough surface that won’t come clean and a roll-top that’s seen better days.
A one-year guarantee comes as standard, so you are not left on your own once we have gone.
- Location
- Burtersett (DL8)
- County
- North Yorkshire
- Guarantee
- One year on every repair
- Quote
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Do you need bath re-enamelling in Burtersett?
Many baths we resurface have simply been well used, with nothing wrong except the surface. The body of the bath is typically perfectly sound.
You may need us if you’ve spotted any of these:
- An old resurfacing that’s failing
- A bath that stays dull however much you clean it
- Brown or grey marks that do not clean off
- Wear marks under the taps
Before you book anyone
- Who will actually do the work
- What preparation is included
- Whether the colour is mixed to match
- Whether the price covers travel
What bath re-enamelling costs
Resurfacing from £350. A fixed quote means you know the cost before booking. We take into account:
- Whether old repairs or coatings need taking off
- How many areas need work
- Whether we combine several jobs
- What kind of damage it is
We do not add extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Getting a price from pictures
A couple of clear pictures is all it takes. It helps if you send:
- One sharp close-up of the damage
- What it’s made of, if you know
- Something in shot to show the size
- Any earlier repairs or coatings
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them to us. What comes back is a fixed price, not a guess.
Our work in Burtersett
Burtersett is about 19 miles west of Catterick Garrison, in North Yorkshire. Book a date that suits you, and we’ll give you an arrival time in advance, so there’s no waiting around. We cover 626 places in North Yorkshire. We work right across the region, from Burtersett to Leeds (42 miles away).
Jobs in DL8 work the same way as everywhere else we cover. You will find streets such as New Lane, Shaws Lane and Mire Bank Lane. Other places close to Burtersett include Hawes (1 mile west), Gayle (1 mile west), Sedbusk (1 mile north), Bainbridge (3 miles east) and Askrigg (4 miles east).
Near you in Burtersett
Typical jobs here are in homes near St Margaret's Church and the streets around them. The countryside around Burtersett includes Semerwater and Addlebrough.
Also near Burtersett
Also in Burtersett
Repair or replace in Burtersett?
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Resurfacing from £350, with every job priced individually. The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed price from your photos, so there are no surprises on the day.
Why Burtersett clients choose us
- Work done at your home or business
- Dust sheets down, tidy finish
- Free fixed quotes from pictures
- Normally one visit, start to finish
See our full price list and resurfacing vs replacement cost guide.
How the visit works
Visits start with a quick look at the job together, so you know exactly what we’re doing. After that, protection goes down around the work area and we start. You can expect it to take the best part of a day, and we will tell you if anything changes.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
Preparing for the visit
- Keep children and pets away from the room on the day
- Tell us if there are stairs or a lift
- Clear the area around the damage
Get a quote
To get a price, send a couple of pictures through our quote form or call us. We’ll tell you honestly whether it can be repaired.
Related advice
DIY kit or professional repair?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
Questions from Burtersett
What information do you need?
A close-up, a wider photo and your postcode. Then we’ll agree a date.
Can you re-enamel a roll-top bath?
Yes. Inside and out.
How long does re-enamelling take?
Most baths are done in a day and can be used the day after. We’ll confirm timings when we quote.
Is it worth repairing rather than replacing?
Typically, when the rest is in good condition. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.
Is it safe with children and pets around?
Please keep children and pets out of the room during the visit. The rest of the house is unaffected.
Can you resurface a pink bath in white?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
Do you work in Burtersett?
Yes. We cover the entire UK and travel to Burtersett. Send pictures and we will quote, or call 0345 017 0787.
Can a failed resurfacing be redone?
Generally, yes. We strip the failing coating and resurface it properly. Mention it when you send photos.
Keeping it looking good
Good habits make a big difference to how long a repair lasts:
- Leave the bath for the full curing time before using it
- Do not leave bottles, razors or sponges standing on the surface
- Clean with a soft cloth and mild detergent
- Wipe the bath dry after use in hard water areas
A quick rinse and wipe after use helps, especially in hard water areas, to stop limescale building up.
On a worn bath, rust spots keep spreading. Resurfacing before they spread keeps it simpler.
What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
About our accreditations · Every repair comes with a one-year guarantee.
