Suffolk · England
Bath Re-enamelling in Burthorpe
Local bath re-enamelling for Burthorpe: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- A coloured bath you want in white
- A period or roll-top bath worth keeping
What a repair cannot fix
A repair isn’t always the answer, and we would rather say so up front. Repairs will not solve:
- A bath split right through the body
- An acrylic bath that flexes badly underfoot
- Problems we can’t see until an old finish comes off
Send us pictures and we will tell you honestly before booking.
Materials we repair
- Acrylic baths
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
Bath re-enamelling at your home in Burthorpe
Re-enamelling gives a worn bath a new glossy surface without a refit. It’s the answer when the entire bath is tired rather than one spot. We work on Victorian roll-tops, basins & shower trays and cast iron baths, and people most often call us about wear marks under the taps and a bath in a colour that no longer suits.
You are covered after we leave: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Where
- Burthorpe (IP29)
- Area hub
- Suffolk
- Guarantee
- A year, on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Also near Burthorpe
More services for Burthorpe
What happens on the day
Expect a friendly, tidy visit. We confirm the time with you beforehand, protect the area, and get on with the job, which usually takes most of the day. If we find something your pictures didn’t show, we’ll explain it before carrying on.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the next day.
Before we arrive
- Open a window if you can
- Mention any earlier repairs or resurfacing
- Point us to the nearest place to park
Getting a price
We price from pictures so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
Related advice
Burthorpe and the surrounding area
Burthorpe is about 5 miles west of Bury St Edmunds, in Suffolk. Whether you’re in the middle of Burthorpe or on the outskirts, the service is the same: a fixed price, a tidy visit and a guarantee. Burthorpe is one of 731 places in Suffolk we cover. You can also see our page for London, about 59 miles away.
Here we cover the IP29 postcode area. You will find streets such as Papeley Meadow, Stoney Lane and Sharpe's Hill, and we cover them all. Nearby, we also work in Barrow (1 mile south-west), Denham End (1 mile south-west), Denham (2 miles south-west), Hargrave (3 miles south) and Ousden (3 miles south-west). Within a short drive, we also cover Bury St Edmunds (5 miles east), Haverhill (13 miles south-west), Brandon (14 miles north), Mildenhall (8 miles north-west), Red Lodge (6 miles north-west) and Lakenheath (12 miles north).
Near you in Burthorpe
Typical jobs here are in homes near Barrow Church of England Voluntary Controlled Primary School, Church of All Saints and The Weeping Willow Public House, among other places. The closest station to Burthorpe is Kennett station, roughly 5 miles north-west. Nearby you’ll also find Denham Castle (1.7 miles west) and West Suffolk Hospital (4.9 miles east). Open spaces near Burthorpe include Old Broom.
Common problems we fix in Burthorpe
Many baths we resurface have simply been well used, and only the surface is worn. The body of the bath is usually perfectly sound.
Most people contact us after spotting something like this:
- A bath in a colour that no longer suits
- A coating lifting around the plughole
- Wear marks under the taps
- A bath that stays dull however much you clean it
Questions to ask before booking
- Is the price fixed, and does it include VAT?
- What the guarantee covers, and for how long
- What protection goes down before work starts
- Whether they match the colour on site
Materials and what they mean for the repair
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot.
DIY repairs versus a professional job
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Questions from Burthorpe
What happens next?
You will get a fixed quote back, typically with dates to choose from. There’s no obligation to book.
Is the work guaranteed?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Will there be fumes?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It clears as the finish cures.
Does someone need to be in?
We need someone to let us in. After that, you can carry on with your day.
How long does re-enamelling take?
One day for most baths, ready the following day. We give you timings with the quote.
Can you fix a peeling bath coating?
In most cases. We strip the failing coating and resurface it properly. Mention it when you send photos.
Will you leave a mess?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
Can you re-enamel a roll-top bath?
Yes. Inside and out if you’d like.
Looking after it afterwards
To keep it looking its best:
- A quick wipe after use keeps limescale away
- Don’t leave bottles, razors or sponges standing on the surface
- Never use suction bath mats
- Rinse off hair dye, oils and bath bombs immediately
Rinse the bath and wipe it over after use, especially in hard water areas, so limescale can’t build up.
If a previous coating is starting to peel, don’t pick at it. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
Repair or replace: which is better?
Replacing a bath can take several days across several trades. Re-enamelling is one technician, usually one day. Our bath re-enamelling starts from £350. What it costs depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed price from your photos, so there are no surprises on the day.
What you get with us
- A year’s guarantee on all work
- We leave the room as we found it
- Free fixed quotes from pictures
- Colour mixed on the day to match
Take a look at our full price list and bath cost comparison.
Prices and what affects them
Prices start from £350. There’s no charge for travel to Burthorpe. The price depends on:
- What the surface is made of
- Where the damage is and how we get to it
- The size and number of damaged areas
- What kind of damage it is
Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access.
Quotes from your photos
Two or three clear photos are typically enough. Try to include:
- Good light, ideally daylight, without flash glare
- A coin or ruler next to the damage for scale
- The postcode, so we can plan the visit
- A photo taken from further back
For a price in Burthorpe, photos are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
About our accreditations · Every repair comes with a one-year guarantee.
