Lincolnshire · England

Bath Re-enamelling in Burton Pedwardine

Bath re-enamelling in Burton Pedwardine without the cost of replacing. Get a fixed price from your photos, then book a visit.

  • Resurfacing from £350
  • A roll-top that is seen better days
  • Thin, worn enamel in places
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath re-enamelling in Burton Pedwardine

How we handle bath re-enamelling in Burton Pedwardine

Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. Typical jobs include a dull, rough surface that won’t come clean and a bath in a colour that no longer suits, across pressed steel baths, basins & shower trays and cast iron baths.

All our work is covered by our one-year guarantee.

Location
Burton Pedwardine (NG34)
Region
Lincolnshire
Warranty
12 months on all our work
Quote
From £350. Free and fixed, from your photos
Telephone
0345 017 0787
Page updated
23 October 2026
Stained basin resurfaced to clean white (before and after)

Common questions in Burton Pedwardine

Will the new finish last?

It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.

Do you resurface freestanding baths?

Yes. Inside and out if you’d like.

Can you quote from pictures?

In nearly every case. If photos don’t show enough, we will ask for another angle.

Is there a guarantee?

Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.

Do I have to be there?

Yes. We need access to the room while we work, at a time that suits you.

What does bath re-enamelling cost?

Resurfacing from £350. Because every job differs, we price from pictures. You know the full cost before anything is booked.

Does re-enamelling smell?

A little, during the work. We set up ventilation and the smell fades as it cures.

Are you a vetted contractor?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

About Burton Pedwardine

Burton Pedwardine is about 4 miles south-east of Sleaford, in Lincolnshire. Across the NG34 area, a technician comes to you. We cover 732 places in Lincolnshire. Our jobs stretch from Burton Pedwardine to Birmingham (74 miles away).

We cover every part of NG34 and the streets around it. Jobs here include addresses on Helpringham Road and Heckington Road and the roads around them. Other places close to Burton Pedwardine include Helpringham (2 miles south-east), Heckington (2 miles north-east), Scredington (2 miles south-west), Kirkby la Thorpe (3 miles north-west) and Swaton (3 miles south). Within a short drive, we also cover Boston (13 miles east), Grantham (13 miles west), Spalding (14 miles south-east), Sleaford (4 miles north-west), Bourne (14 miles south) and Austerby (14 miles south).

What’s near Burton Pedwardine

Around Burton Pedwardine, we work in homes near Church of St Andrew and the streets around them. The nearest railway station is Heckington station, roughly 1.9 miles north-east of the centre. A little further out are Rauceby Hospital (5 miles west) and Sleaford Castle (4 miles north-west).

Map of Burton Pedwardine © OpenStreetMap contributors

Should you replace it?

Getting a cast iron bath out is hard work: they’re heavy, often need breaking up, and a new one is not cheap. Re-enamelling avoids all of it. Prices start from £350. Compared with replacing, a repair is generally a fraction of the price, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.

Why us?

  • We leave the room as we found it
  • One-year guarantee on every repair
  • Colour-matched on site
  • Fixed prices from your pictures

Read our prices page or resurfacing vs replacement cost guide.

Materials and what they mean for the repair

Cast iron

Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.

Roll-top and period baths

Freestanding roll-tops can be done inside and out, and the outside can be refinished too.

Work for landlords and builders

Landlords, letting agents and housing providers in Burton Pedwardine use us as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.

Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.

What we do, step by step

On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take most of the day. We clean up when we’re done and let you know when you can use it again.

  1. The bathroom is protected and ventilation set up.
  2. We remove the old silicone and deep clean the bath.
  3. We repair chips, rust spots and pitting.
  4. We key the bath and apply a bonding primer.
  5. Several coats of finish are sprayed on, then it cures until the following day.

How to prepare

  • Keep pets and children out of the room while we work
  • Mention if the room is upstairs or in a flat
  • Tell us about any previous repairs or coatings

Getting a price

The quickest way to a price is to send two or three pictures using our quote form or call us. We will say right away if a repair is the right fix.

Get a free quote

Advice

What a repair cannot fix

To be straight with you, there are a few things a repair will not fix:

  • An acrylic bath that flexes badly underfoot
  • Damage hidden under a previous coating, until it’s stripped back
  • A metal bath with a through crack

Not sure? Send photos and we’ll give you a straight answer before booking.

Materials we repair

  • Basins & shower trays
  • Cast iron baths
  • Acrylic baths
  • Pressed steel baths
  • Victorian roll-tops

Looking after it afterwards

So the finish stays in good condition:

  • Store bottles off the bath
  • Get any chip repaired quickly
  • Respect the curing time we give you
  • Rinse off hair dye, oils and bath bombs right away

A quick rinse and wipe after use helps, especially in hard water areas, so limescale cannot build up.

Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.

Prices and what affects them

Prices start from £350. Each job gets its own fixed price. These are the things that affect it:

  • What kind of damage it is
  • Whether we combine several jobs
  • How hard the colour is to match
  • The material

A repair generally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.

Quotes from your pictures

When you take your pictures, a few simple things make all the difference:

  • Natural light rather than flash
  • A coin beside the damage so we can judge size
  • The postcode, so we can plan the visit
  • Any details about the material

Send us photos of the damage and a wider shot of the entire item, with your NG34 postcode, and we’ll reply with a fixed quote.

Signs you need bath re-enamelling in Burton Pedwardine

A dull surface stains and holds dirt, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.

Look out for any of the following:

  • Enamel that is lost its shine and feels rough
  • A peeling or bubbling previous coating
  • Staining under the taps and around the waste
  • Lots of chips and rust spots

Questions to ask before you book

  • How soon you can use it again
  • A fixed price, and whether VAT is included
  • Whether the price covers travel
  • Whether a trained technician does the job

Choosing a repair company

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.