North Lincolnshire · England
Bath re-enamelling & resurfacing in Burton upon Stather, North Lincolnshire
Bath re-enamelling across Burton upon Stather and nearby, generally in one visit.
- Resurfacing from £350
- Stains that will not shift
- A coating lifting around the plughole
FAQs for Burton upon Stather
Is it worth repairing rather than replacing?
Normally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
Can you re-enamel a roll-top bath?
Yes, often. We resurface the inside, and the outside can be refinished too.
How durable is a resurfaced bath?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
Can you change the colour of my bath?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Can you repair something that is been repaired before?
Yes, regularly. It can add a little time, which we include in the quote.
Do you cover Burton upon Stather?
Yes, we do. Technicians travel to Burton upon Stather from across the region, and the price is the same as everywhere else.
How long does re-enamelling take?
Most baths are done in a day, ready the day after. We will confirm timings when we quote.
About our bath re-enamelling in Burton upon Stather
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. If you are dealing with a bath that stays dull however much you clean it and stains that won’t shift, we can usually put it right, on basins & shower trays, Victorian roll-tops and acrylic baths alike.
All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.
- Area
- Burton upon Stather (DN15)
- Region
- North Lincolnshire
- Warranty
- One year on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Nearby places to Burton upon Stather
Also in Burton upon Stather
Common problems we fix in Burton upon Stather
A dull surface stains and holds dirt, and scrubbing it wears it down further. That’s the point where re-enamelling makes sense.
Most people contact us when they notice one of these:
- Lots of chips and rust spots
- An old resurfacing that is failing
- A bath that stays dull however much you clean it
- An outdated colour you’d like to change
Questions to ask before you book
- What preparation is included
- Whether the price is fixed and includes VAT
- How changes to the job are handled
- The length of the guarantee and what it covers
What a repair cannot fix
Some problems need a builder, plumber or fitter rather than us:
- A bath that’s rusted through
- Leaking taps or wastes (a plumber’s job)
- A cast iron or steel bath that is cracked right through
Send us pictures and we will tell you honestly before booking.
Surfaces we repair
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
Burton upon Stather and nearby
Burton upon Stather is about 6 miles north of Scunthorpe, in North Lincolnshire. We agree a date that works for you, and we’ll give you an arrival time in advance, so you are not left waiting in all day. Our repair technicians cover 90 places in North Lincolnshire, from the larger towns to small villages. Our nearest city page is Leeds, about 37 miles away.
Jobs in DN15 work the same way as everywhere else we cover. We regularly work on streets such as High Street, Norfolk Avenue and Huntingdon Crescent and the roads around them. Close by, we cover Normanby (1 mile south-east), Thealby (1 mile east), Flixborough (2 miles south), Walcot (2 miles north) and Flixborough Stather (2 miles south). Within a short drive, we also cover Scunthorpe (6 miles south), Barton-upon-Humber (10 miles east), Bottesford (7 miles south), Brigg (10 miles south-east), Frodingham (4 miles south) and Crosby (4 miles south).
What’s near Burton upon Stather
Around Burton upon Stather, we work in homes near Burton-upon-Stather Primary School, Sheffield Arms and Church of St Andrew. For rail, the closest station is Scunthorpe station, about 4.6 miles south. Further afield, we also cover the area around Scunthorpe General Hospital (4.4 miles south). Open spaces near Burton upon Stather include Blacktoft Sands RSPB reserve.
What bath re-enamelling costs
Prices start from £350. You’ll know the full cost before you book. We take into account:
- Where the damage is and how we get to it
- The colour and finish to match
- What kind of damage it is
- Any earlier repairs that need removing first
Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access.
Quotes from your pictures
Good photos mean an accurate price. Here’s what helps:
- What it’s made of, if you know
- A clear, close picture of the problem area
- The postcode, so we can plan the visit
- Any earlier repairs or coatings
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed quote without visiting.
Landlord and trade work in Burton upon Stather
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.
For anyone letting property in or around Burton upon Stather, we can repair and quote for several addresses together. Send pictures for each one and we will come back with a combined price.
Should you replace it?
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Prices start from £350. Compared with replacing, a repair is normally a fraction of the price, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.
What you get with us
- CHAS, Constructionline and SafeContractor accredited
- A fixed quote before you book
- A year’s guarantee on all work
- One visit for most repairs
Read our full price list and bath cost comparison.
Keeping it looking good
Looking after the surface is easy, and it makes a real difference:
- Respect the curing time we give you
- Have chips seen to early
- Keep toiletries on a shelf rather than in the bath
- Do not let dyes or oils sit on the finish
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
What happens on the day
Nothing needs to be moved out of the room. Everything we use comes in the van with us, lay protective sheets and start once you’re happy with the plan. It usually takes most of the day, and you can get on with other things while we’re there.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Have a window or extractor fan available
- Mention any parking restrictions or tricky access
- Clear the area around the damage
Get a quote
If you are in Burton upon Stather and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Advice
Different materials, different repairs
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot.
About our accreditations · Every repair comes with a one-year guarantee.
