Cheshire East · England
Bath re-enamelling & resurfacing in Byley, Cheshire East
Bath re-enamelling in Byley without the cost of replacing. Send us pictures for a fixed price, then we come to you.
- Resurfacing from £350
- Chips and rust in more than one place
- A bath in a colour that no longer suits
About our bath re-enamelling in Byley
Most baths are re-enamelled in a day, with the bath ready to use the following day. Taps, tiles, panels and plumbing all stay in place. Our repair technicians work on cast iron baths, acrylic baths and Victorian roll-tops, and people most often call us about thin, worn enamel in places and a peeling or bubbling previous coating.
Every repair comes with our one-year guarantee, wherever you are in Cheshire East.
- Location
- Byley (CW10)
- Region
- Cheshire East
- Guarantee
- 12 months on all our work
- Quote
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Repair or replace in Byley?
A replacement often means several trades over several days. Resurfacing takes one technician and generally a day, with the bath back in use the day after. Our bath re-enamelling starts from £350. What it costs depends on the type and amount of damage, the material and how many items we do on one visit. We give a fixed quote from your photos, so you know the cost before you book.
What you get with us
- A fixed quote before you book
- One-year guarantee on every repair
- Accredited with CHAS, Constructionline and SafeContractor
- Most jobs done in one visit
Read our pricing and bath cost comparison.
Nearby places to Byley
Also in Byley
What a repair can’t fix
Some problems need a builder, plumber or fitter rather than us:
- An acrylic bath that flexes badly underfoot
- Problems we cannot see until an old finish comes off
- Leaks from fittings rather than the bath
Not sure? Send pictures and we’ll give you a straight answer.
Materials we work on in Byley
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
When to call us in Byley
A dull surface stains and holds dirt, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
Contact us if you’ve noticed:
- Chips and rust in more than one place
- Enamel that is lost its shine and feels rough
- A roll-top that is seen better days
- An old resurfacing that’s failing
Questions to ask before you book
- Whether the colour is mixed to match
- Is the price fixed, and does it include VAT?
- How your room will be protected
- Whether there are any call-out or travel charges
About Byley
Byley is about 3 miles north-east of Middlewich, in Cheshire East. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Byley is one of 254 places in Cheshire East where we work. Our jobs stretch from Byley to Manchester (about 19 miles away).
Jobs in CW10 are booked in the same way as anywhere else. That includes homes on Moss Lane and Drakelow Lane. Nearby, we also work in Lach Dennis (2 miles north-west), Lostock Green (3 miles north-west), Broken Cross (3 miles north-west), Rudheath (4 miles north-west) and Plumley (4 miles north). Within a short drive, we also cover Crewe (9 miles south), Macclesfield (12 miles east), Congleton (9 miles south-east), Wilmslow (11 miles north-east), Nantwich (12 miles south) and Knutsford (6 miles north).
Landmarks near Byley
Around Byley, we work in homes near St John the Evangelist's Church and Byley Primary School and Nursery, among other places. The nearest railway station is Holmes Chapel station, roughly 3.1 miles south-east. Nearby you’ll also find Victoria Infirmary (5.1 miles north-west).
Materials and what they mean for the repair
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported.
What happens on the day
On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a full day. We tidy up before we leave and tell you when it’s ready to use.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- Once cured, normally by the day after, the bath is ready.
Before we arrive
- Mention if the room is upstairs or in a flat
- Move bottles, mats and clutter away from the area
- Point us to the nearest place to park
How to get a price
There is no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.
Advice
Looking after it afterwards
Much of the damage we repair could have been avoided. These habits help:
- Dry the bath after use to stop limescale
- Fix dripping taps quickly
- Clean with a soft cloth and mild detergent
- Leave the bath for the full curing time before using it
Treat the new finish gently at first: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
DIY repairs versus a professional job
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
What affects the price in Byley
Resurfacing from £350. We price every job individually. What matters most is:
- How many areas need work
- Whether old repairs or coatings need taking off
- The colour and finish to match
- Where the damage is and how we get to it
We don’t add extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Getting a price from photos
It only takes a minute to photograph the damage. Try to send:
- Daylight if possible, and no flash reflection
- Your postcode, so we can check dates
- A clear, close picture of the problem area
- Any earlier repairs or coatings
To get a price, send two or three photos using our quote form or ring us. We’ll say straight away whether it can be repaired.
Byley questions
Is it OK to have pets in the house?
Just keep them out of the work area. We will tell you when the room can be used again.
Can a failed resurfacing be redone?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Do you need to take the bath out?
No. We resurface it in place, so the tiles and taps stay put.
Will there be fumes?
Some odour is normal while we spray, which is why we ventilate the bathroom. It clears as the finish cures.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
How long will the bath be out of use?
Most baths are done in a day and can be used the day after. We give you timings with the quote.
Which areas do you work in?
The entire UK, including all of Cheshire East. Send your postcode with your photos and we will confirm dates.
It’s been repaired before. Can you still fix it?
In most cases. We remove the old repair before doing a new one, so mention it when you send photos.
About our accreditations · Every repair comes with a one-year guarantee.
