Swansea · Wales
Bath re-enamelling & resurfacing in Cae-mawr, Swansea
Bath re-enamelling for Cae-mawr, without a refit. Get a fixed quote from your photos, then we come to you.
- Resurfacing from £350
- A roll-top that’s seen better days
- Stains that will not shift
Bath re-enamelling at your home in Cae-mawr
Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. We work on basins & shower trays, cast iron baths and pressed steel baths, and people most often call us about staining under the taps and around the waste and a bath that stays dull however much you clean it.
All our work is covered by a one-year guarantee.
- Location
- Cae-mawr (SA6, SA7)
- County
- Swansea
- Guarantee
- A year, on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Work for landlords and builders
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
Repair or replace in Cae-mawr?
If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Prices start from £350. Compared with replacing, a repair is usually a fraction of the price, because there is no removal, plumbing or making good. The quote lists exactly what you’re paying for.
What you get with us
- One-year guarantee on every repair
- CHAS and Constructionline accredited
- Repair technicians who travel to you, UK-wide
- Free fixed quotes from pictures
See our pricing or bath cost comparison.
Other services in Cae-mawr
What a repair can’t fix
We’ll always be straight with you, so here’s what a repair can’t fix:
- A bath split right through the body
- Holes rusted through the metal
- Plumbing leaks, which need a plumber
Not sure? Send photos and we will give you a straight answer.
Surfaces we repair
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
Keeping it looking good
Aftercare is simple:
- Leave the bath for the full curing time before using it
- Never use suction bath mats
- Do not let dyes or oils sit on the finish
- Have chips seen to early
Dry the bath after use if possible, and rinse away any product left on the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.
Different materials, different repairs
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Prices and what affects them
Resurfacing from £350. A fixed quote means you know the cost before booking. We take into account:
- Doing more than one item at once
- Any earlier repairs that need removing first
- What the surface is made of
- The colour and finish to match
The price reflects the work involved, not where you live. You’ll see the full price before booking, with nothing added on the day.
Send photos for a quote
Good photos mean an accurate price. Here’s what we find most useful:
- A coin or ruler next to the damage for scale
- Daylight if possible, and no flash reflection
- Details of any past repairs
- Your postcode, so we can check dates
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
How it works
Expect a friendly, tidy visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which typically takes most of the day. If anything looks different from your photos, we’ll talk to you before going ahead.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- Once cured, normally by the following day, the bath is ready.
Getting ready for the visit
- Tell us about any previous repairs or coatings
- Tell us if there are stairs or a lift
- Move bottles, mats and clutter away from the area
Get a quote
The quickest way to a price is to send a couple of photos using our quote form or call us. We’ll say straight away whether it can be repaired.
Related advice
Covering Cae-mawr
Cae-mawr is about 2 miles north-east of Morriston, in Swansea. We travel to customers in Cae-mawr and nearby villages, so there is no workshop to go to. We work in all 153 towns and villages in Swansea.
All of SA6 and SA7 is within our area. Streets in the area include View Road, Quarr Road and Gwysfa Road, and we cover them all. We also cover the places around Cae-mawr: Quarr-Clydach (1 mile north), Graigfelen (1 mile north), Ynystawe (1 mile south), Cwmrhydyceirw (1 mile south-west) and Ynysforgan (1 mile south-west). Further out, we also cover Swansea (5 miles south-west), Castle (5 miles south), Mount Pleasant (5 miles south), Gorseinon (6 miles west), Dyfaty (5 miles south) and Uplands (6 miles south-west).
What’s near Cae-mawr
Around Cae-mawr, we work in homes near St Mary's Church, Morriston Comprehensive School and Craigfelen Primary School. For rail, the closest station is Llansamlet station, about 2.3 miles south of the centre. Nearby you will also find Clydach War Memorial Hospital (within half a mile north-east) and Welsh Museum of Fire (3 miles south-east). The countryside around Cae-mawr includes Pluck Lake and Cwm Clydach RSPB Reserve.
Cae-mawr: your questions answered
Someone resurfaced my bath and it’s peeling. Can you help?
Yes. Removing the old finish takes extra time, which we include in the price.
Will the bath be moved?
Not at all. We work on the bath in place, with the room protected and ventilated.
Is there a smell?
Some odour is normal while we spray, so we ventilate the room. It fades as the coating cures.
Does someone need to be in?
We need someone to let us in. After that, you can carry on with your day.
Can you repair something that is been repaired before?
Yes, regularly. Removing the old work can add time, and that’s in the quote.
Is it worth repairing rather than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.
I’m a tenant. Can you help?
We are happy to deal with the tenant, landlord or agent. Just ensure the landlord agrees.
What does bath re-enamelling cost?
Prices start from £350. The exact price depends on the damage, so we quote from photos. You will get a fixed figure before you book.
Do you need bath re-enamelling in Cae-mawr?
Previous coatings can fail too, lifting by the plughole or blistering. We strip what’s failing and start again.
Common reasons people in Cae-mawr contact us include:
- A bath in a colour that no longer suits
- Thin, worn enamel in places
- Several chips and rust patches
- An original cast iron bath that needs restoring
What your quote should include
- Whether cleaning and preparation are in the price
- How long the guarantee is and what it covers
- Who will actually do the work
- Is the price fixed, and does it include VAT?
About our accreditations · Every repair comes with a one-year guarantee.
