North Somerset · England
Bath re-enamelling & resurfacing in Cambridge Batch, North Somerset
Bath re-enamelling across Cambridge Batch and nearby, usually in one visit and guaranteed for a year.
- Resurfacing from £350
- An old resurfacing that’s failing
- Thin, worn enamel in places
DIY kit or professional repair?
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
If you do try a kit, read the instructions carefully, and give it the full curing time. If it does not work out, we can still repair it properly.
Bath re-enamelling in Cambridge Batch without replacing anything
The bath stays where it is, so the taps, tiles and plumbing aren’t touched. Most baths are done in one visit, with the bath ready to use the following day. Whether it’s chips and rust in more than one place and a coating lifting around the plughole, we can usually put it right.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Location
- Cambridge Batch (BS48)
- Region
- North Somerset
- Cover
- One year on every repair
- Price
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
FAQs for Cambridge Batch
What happens next?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
How do I book?
Just pictures, your postcode and a contact number. On the day, access to the room.
Is repairing better than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.
How quickly can you book me in?
Your quote comes with available dates. If it’s urgent, say so and we will do what we can.
How durable is a resurfaced bath?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
Do I have to be there?
Yes. We need access to the room while we work, at a time we agree with you.
The process
Nothing needs to be moved out of the room. Everything we use comes in the van with us, lay protective sheets and get going once we have agreed what we’re doing. It typically takes a full day, and you are welcome to carry on with your day while we work.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
How to prepare
- Make sure the room can be ventilated
- Keep a parking space free if you can
- Keep pets and children out of the room while we work
How to get a price
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
Related advice
What we can’t put right
We would rather lose a job than do one that will not last, so these are the limits:
- Leaking taps or wastes (a plumber’s job)
- An acrylic bath that flexes badly underfoot
- A bath split right through the body
If in doubt, send pictures and we’ll say what we think before booking.
Surfaces we repair
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
Aftercare tips
Simple care helps the repair last. Our advice:
- Rinse off hair dye, oils and bath bombs straight away
- Do not leave a chip unrepaired
- Keep toiletries on a shelf rather than in the bath
- Clean with a soft cloth and mild detergent
Rinse the bath and wipe it over after use, especially in hard water areas, to stop limescale building up.
If a previous coating is starting to peel, do not pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Do you need bath re-enamelling in Cambridge Batch?
Hard water speeds up the wear, and abrasive cleaners do the most damage.
Keep an eye out for these signs:
- A coating lifting around the plughole
- A bath that stays dull however much you clean it
- Lots of chips and rust spots
- A roll-top that’s seen better days
Before booking anyone
- Who will actually do the work
- Whether the price is fixed and includes VAT
- What aftercare is recommended
- If travel is included in the price
Repair or replace: which is better?
Replacing the bath means a plumber, removing a heavy bath, re-tiling or making good the walls and several days without a working bathroom. Resurfacing gives the bath a new finish without moving it. Resurfacing from £350, with every job priced individually. Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access.
Why us?
- Colours mixed by hand to suit your surface
- Work done at your home or business
- No need to remove anything
- Free fixed quotes from pictures
Take a look at our pricing and guide to resurfacing and replacement costs.
Nearby places to Cambridge Batch
More services for Cambridge Batch
Cambridge Batch and nearby
Cambridge Batch is about 3 miles east of Nailsea, in North Somerset. We visit customers in Cambridge Batch, so nothing has to leave your home. Cambridge Batch is one of 86 towns and villages in North Somerset where we work. Our nearest city page is Birmingham, about 80 miles away.
We work across BS48 and the streets around it. You’ll find streets such as Rosemount Road, Head Croft and Clevedon Road. Nearby, we also work in Barrow Gurney (1 mile south-east), Failand (1 mile north), Long Ashton (1 mile east), Barrow Common (2 miles south-east) and Abbots Leigh (3 miles north-east). Larger places within reach include Weston-super-Mare (12 miles south-west), Portishead (5 miles north-west), Clevedon (7 miles west), Nailsea (3 miles west), Milton (12 miles south-west) and Yatton (6 miles south-west).
Around Cambridge Batch
Our clients here include homes close to Church of St Michael and All Angels and Flax Bourton Church of England Primary School. For rail, the closest station is Nailsea & Backwell station, about 2.4 miles west of the centre. Nearby you’ll also find Barrow Hospital (1.4 miles east) and Oakham Treasures (3.1 miles north). Green spaces nearby include Backwell Lake and Clapton Moor.
What affects the price in Cambridge Batch
Resurfacing from £350. Each job gets its own fixed price. This is what makes a difference:
- Previous DIY repairs that have to come out
- The material and finish
- The colour and finish to match
- How many areas need work
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
Getting a price from photos
It only takes a minute to photograph the damage. Try to send:
- A coin or ruler next to the damage for scale
- Your postcode, so we can check dates
- A close-up of the damage, in focus
- Good light, ideally daylight, without flash glare
If you’re in Cambridge Batch and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot.
About our accreditations · Every repair comes with a one-year guarantee.
