North Somerset · England
Bath re-enamelling & resurfacing in Milton, North Somerset
Full bath re-enamelling and resurfacing at your home in Milton, with a one-year guarantee on every repair.
- Resurfacing from £350
- Lots of chips and rust spots
- An outdated colour you’d like to change
Bath re-enamelling in Milton without replacing anything
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. We regularly repair cast iron baths, acrylic baths and pressed steel baths, and common reasons people get in touch are an outdated colour you’d like to change and lots of chips and rust spots.
A one-year guarantee comes as standard, so you are covered after the visit.
- Area
- Milton (BS22, BS23)
- Region
- North Somerset
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Should I try a DIY kit first?
If you’re set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
Other services in Milton
Why repair rather than replace?
If the bath is sound, re-enamelling is usually much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Our bath re-enamelling starts from £350. The price reflects the work involved, not where you live. You’ll see the full price before you book, with nothing added on the day.
Why us?
- Nothing taken out or refitted
- Colour-matched on site
- Free fixed quotes from pictures
- CHAS and Constructionline accredited
Take a look at our pricing or resurfacing vs replacement cost guide.
Landlords, agents and businesses in Milton
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit.
What a repair can’t fix
A repair is not always the answer, and we will tell you before we start. We can’t fix:
- A metal bath with a through crack
- Steel that has corroded right through
- A poorly supported acrylic bath, until it’s firmed up
If in doubt, send photos and we’ll say what we think before you book.
Materials we repair
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
Looking after it afterwards
Looking after the surface is easy, and it makes a real difference:
- Rinse off hair dye, oils and bath bombs straight away
- Respect the curing time we give you
- Get any chip repaired quickly
- Keep suction mats out of the bath
Use mild, non-abrasive cleaners, don’t use suction bath mats, and don’t leave bottles or razors standing on the surface.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Questions from Milton
How soon can you come?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Can I get a quote without a visit?
In nearly every case. If pictures don’t show enough, we’ll ask for another angle.
Can you fix a peeling bath coating?
Generally, yes. We strip the failing coating and resurface it properly. Mention it when you send pictures.
Is there a call-out fee?
There is no separate call-out charge. The fixed price covers the visit and the work.
Do you resurface freestanding baths?
Yes. We can do the inside and outside if you’d like.
Will it make a mess?
Dust sheets and masking go down before we start, and we clean up when we have finished.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as homeowners across North Somerset.
What does bath re-enamelling cost?
Prices start from £350. The exact price depends on the damage, so we quote from pictures. You will get a fixed figure before booking.
The process
On the day itself, there’s little for you to do. Show us the job, point us to the room, and we’ll get on with it. The job generally runs to the best part of a day, tidy-up included.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the following day.
Getting ready for the visit
- Let us know which floor the room is on
- Mention any parking restrictions or tricky access
- Point us to the nearest place to park
Getting a price
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed price without visiting.
Related advice
Do you need bath re-enamelling in Milton?
Many baths we resurface have simply been well used, with nothing wrong except the surface. Underneath, a cast iron or steel bath is generally as strong as ever.
If you can see any of these, send us a picture:
- Thin, worn enamel in places
- Several chips and rust patches
- An original cast iron bath that needs restoring
- A bath in a colour that no longer suits
What to look for in a quote
- How long it needs to cure
- Whether there are any call-out or travel charges
- Whether they match the colour on site
- What happens if they find more damage
About Milton
Milton is about 1 mile north of Weston-super-Mare, in North Somerset. We travel to customers in Milton and nearby villages, so you do not need to take anything anywhere. We work in 86 places in North Somerset.
Jobs in BS22 and BS23 work the same way as everywhere else we cover. You’ll find streets such as Farm Road, Furze Road and Ewart Road. Neighbouring places we cover include Weston-super-Mare (1 mile south), Worle (1 mile east), Norton (1 mile north), Kewstoke (1 mile north-west) and West Wick (2 miles east). Further out, we also cover Portishead (12 miles north-east), Clevedon (7 miles north-east), Nailsea (9 miles north-east), Yatton (6 miles north-east), Port Marine (12 miles north-east) and Pill (14 miles north-east). As one of the bigger places in North Somerset, Milton is somewhere we visit frequently.
What’s near Milton
Typical jobs here are in homes near North Somerset Enterprise and Technology College, Milton Park Primary School and The Windsor Castle pub. Nearby too are North Somerset Enterprise and Technology College (0.6 miles south), St Peter & St Jude (within half a mile south-east) and Jill's Garden (1.4 miles west). The closest station to Milton is Weston Milton station, roughly 0.6 miles south-east of the centre. Well-known places in the area include Castle Batch (1.5 miles north-east) and Lambretta Scooter Museum (1.1 miles south-west). Not far away are Worlebury Hill and Blake's Pools.
About our accreditations · Every repair comes with a one-year guarantee.
