North Somerset · England
Bath Re-enamelling for Nailsea homes
Bath re-enamelling for Nailsea, without a refit. Send us photos for a fixed quote, then book a visit.
- Resurfacing from £350
- A bath in a colour that no longer suits
- Several chips and rust patches
Bath re-enamelling in Nailsea, done in place
Resurfacing renews the entire surface of the bath without a refit. It’s the answer when the whole bath is tired rather than one spot. If you are dealing with a coating lifting around the plughole and several chips and rust patches, we can typically put it right, whatever the material.
Every repair is covered by our one-year guarantee, wherever you are in North Somerset.
- Where
- Nailsea (BS48)
- Region
- North Somerset
- Cover
- One year on every repair
- Quote
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Repair or replace in Nailsea?
Replacing the bath means a plumber, lifting out the old bath, making good the walls and tiles and days without a bathroom. Resurfacing gives the bath a new finish without moving it. Prices start from £350. There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why us?
- CHAS and Constructionline accredited
- Dust sheets down, tidy finish
- Every repair guaranteed for a year
- We come to you, anywhere in the UK
See our prices page and bath cost comparison.
Towns and villages near Nailsea
What else we do in Nailsea
About Nailsea
Nailsea is about 8 miles west of Bristol, in North Somerset. Wherever you are in the BS48 postcode area, a technician comes to you. We work in all 86 towns and villages across North Somerset.
Every address in BS48 is within our area, from the main roads to the quietest streets. Jobs here include addresses on Somerset Square, Old Church Road and Station Road. Main roads around Nailsea include the B3130, so getting to you is simple. We also travel to Stone-edge Batch (1 mile north), Backwell Common (1 mile east), West Hill (1 mile north-east), Chelvey (1 mile south) and Backwell (1 mile south-east). Larger places within reach include Weston-super-Mare (10 miles south-west), Portishead (4 miles north), Clevedon (4 miles west), Milton (9 miles south-west), Yatton (4 miles south-west) and Worle (9 miles south-west). Nailsea is one of the larger places we cover in North Somerset.
Local landmarks in Nailsea
Locally, our jobs take us to homes close to Nailsea School, The Royal Oak pub and Hannah More Infant School, among other places. For rail, the closest station is Nailsea & Backwell station, roughly 0.9 miles south-east of the centre. Well-known places in the area include Oakham Treasures (3.1 miles north-east) and North Somerset Community Hospital (3.7 miles west). Open spaces near Nailsea include Backwell Lake and Tickenham Hill.
How the visit works
You don’t need to empty the room. We bring everything we need with us, lay protective sheets and start once you are happy with the plan. It typically takes most of the day, and you can get on with other things while we are there.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s typically ready the next day.
Before we arrive
- Clear toiletries, mats and anything else from around the area
- Mention if the room is upstairs or in a flat
- Make sure the room can be ventilated
Get a quote
Most clients in Nailsea get their price from pictures. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Advice
Should I try a DIY kit first?
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.
What a repair cannot fix
Honesty matters more than a booking, so here’s what a repair cannot fix:
- Acrylic that moves when you stand in it
- Steel that has corroded right through
- A bath split right through the body
If in doubt, send photos and we will say what we think.
What we work on
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
FAQs for Nailsea
Is there a smell?
Some odour is normal while we spray, so we ventilate the room. It fades as the coating cures.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Is it messy?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
How long is the bath unusable?
Normally a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Can pets and children be at home?
On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.
Does the bath have to be removed?
Not at all. Everything is done in your bathroom, with the room protected and ventilated.
Is there any odour?
There can be some smell while we work, so we ventilate the room. It fades as everything cures.
Prices and what affects them
Resurfacing from £350. Each job gets its own fixed quote. This is what makes a difference:
- The size and number of damaged areas
- Any earlier repairs that need removing first
- Access to the area
- How many items we do on one visit
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
How to get a fixed price
Photographing the damage takes a minute. Please include:
- Good light, ideally daylight, without flash glare
- Details of any past repairs
- A clear, close picture of the problem area
- Where you are, by postcode
Email us pictures of the damage and a wider shot of the whole item, with your BS48 postcode, and we’ll reply with a fixed price.
How to care for the repair
Aftercare is simple:
- Keep suction mats out of the bath
- Don’t let dyes or oils sit on the finish
- Don’t leave bottles, razors or sponges standing on the surface
- Leave the bath for the full curing time before using it
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
On a worn bath, rust spots keep spreading. Resurfacing before they spread keeps it simpler.
What we are called out for in Nailsea
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
Send us a picture if you notice any of these:
- An original cast iron bath that needs restoring
- Worn patches where water runs and sits
- Brown or grey marks that don’t clean off
- A peeling or bubbling previous coating
What to look for in a quote
- How long it needs to cure
- Whether the colour is mixed to match
- What the guarantee covers, and for how long
- Aftercare advice
Landlords, agents and businesses in Nailsea
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
About our accreditations · Every repair comes with a one-year guarantee.
