Cornwall · England
Bath re-enamelling & resurfacing in Liskeard, Cornwall
Full bath re-enamelling and resurfacing at your home in Liskeard, with a one-year guarantee on every repair.
- Resurfacing from £350
- Staining under the taps and around the waste
- Lots of chips and rust spots
Bath re-enamelling in Liskeard without replacing anything
We do not move the bath, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, and can be used again the day after. Typical jobs include an original cast iron bath that needs restoring and lots of chips and rust spots, on cast iron baths, acrylic baths and basins & shower trays.
Big or small, it’s backed by a one-year guarantee in Liskeard and across Cornwall.
- Location
- Liskeard (PL14)
- Area hub
- Cornwall
- Cover
- One year on every repair
- Quote
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Landlords, agents and businesses in Liskeard
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
Letting agents often send us photos straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Places near Liskeard
Other services in Liskeard
What we do, step by step
We begin by going over the job with you. After that, protection goes down around the work area and we start. It normally takes most of the day, and we will tell you if anything changes.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the following day.
Before we arrive
- Keep a parking space free if you can
- Tell us about parking, stairs or access
- Move bottles, mats and clutter away from the area
Get a quote
Most customers in Liskeard get their price from pictures. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Read more
Liskeard and nearby
Liskeard is about 15 miles west of Plymouth, in Cornwall. We travel to customers in Liskeard, so nothing has to leave your home. Liskeard is one of 644 towns and villages in Cornwall where we work.
Our technicians cover all of the PL14 postcode area. You will find streets such as Market Approach, Station Road and Castle Gardens, and we cover them all. Being close to the B3254, Liskeard is simple for us to get to. Nearby, we also work in Addington (1 mile north-east), Trembraze (1 mile north-east), Lamellion (1 mile south-west), Hendrabridge (1 mile north-east) and Moorswater (1 mile west). Within a short drive, we also cover Stonehouse (14 miles south-east), Bodmin (11 miles west), Saltash (11 miles east), Launceston (13 miles north), Bethel (15 miles south-west) and Looe (7 miles south).
Near you in Liskeard
In Liskeard, that means homes near St Martin's CofE Primary School, St Martin's Church and Liskeard School and Community College and the streets around them. The nearest railway station is Liskeard station, roughly 0.7 miles south-west. A little further out are Liskeard and District Museum (less than half a mile west) and Caradon (less than half a mile south-west). For a walk, there’s Caradon Hill.
What affects the price in Liskeard
Prices start from £350. We charge the same across the UK, including Liskeard. What changes the price is:
- How easy the damage is to reach
- Any earlier repairs that need removing first
- How many areas need work
- Doing more than one item at once
What it costs depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed quote from your pictures, so you know the cost before booking.
Quotes from your photos
Photographing the damage takes a minute, and it saves a visit. Please include:
- What it’s made of, if you know
- A picture taken from further back
- A clear, close picture of the problem area
- Good light, ideally daylight, without flash glare
Email us a picture of the damage and a wider shot of the whole item, with your PL14 postcode, and we’ll come back with a fixed quote.
Aftercare tips
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Don’t leave bottles, razors or sponges standing on the surface
- Stick to gentle, non-abrasive cleaners
- A quick wipe after use keeps limescale away
- Don’t use the bath until it has fully cured
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Repair dripping taps promptly.
On a worn bath, rust spots keep spreading and make the job bigger. It’s simpler to resurface before they spread.
What your bath is made of matters
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we check it carefully.
What we’re called out for in Liskeard
Older baths often have several problems at once: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
People typically call us after spotting something like this:
- An original cast iron bath that needs restoring
- Brown or grey marks that don’t clean off
- Enamel that’s lost its shine and feels rough
- A peeling or bubbling previous coating
Comparing quotes
- Whether the price is fixed and includes VAT
- How to look after the finish
- How the room is protected while they work
- How long it needs to cure
Questions from Liskeard
Do you work for landlords and businesses?
We do, regularly. We can quote for several properties together and work between tenancies.
How long is the bath unusable?
One day for most baths, ready the day after. We’ll confirm timings when we quote.
Can you repair several things at once?
Of course, and it normally saves money. Send pictures of everything together and you will get one combined price.
How long does re-enamelling last?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Can you quote from pictures?
Nearly always. We only ask to see it in person if the pictures cannot show what we need.
What happens if you find more damage?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Do you cover the whole of Cornwall?
We work UK-wide, and that includes Liskeard. Prices do not change with location.
DIY repairs versus a professional job
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Repairing versus replacing in Liskeard
There are times replacing is better: if the bath is cracked through, if you want a different size or shape, or if you’re refitting the whole room anyway. Otherwise, resurfacing generally wins. Prices start from £350. No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
Why us?
- Work done at your home or business
- Everything repaired in place
- CHAS, Constructionline and SafeContractor accredited
- Most jobs done in one visit
See our prices page and guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
