Glasgow · Scotland
Bath re-enamelling & resurfacing in Camlachie, Glasgow
Problem with your bath in Camlachie? We repair it in place, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- Staining under the taps and around the waste
- A bath that stays dull however much you clean it
When a repair isn’t the answer
Some problems need a builder, plumber or fitter rather than us:
- Anything hidden under an old coating, until we remove it
- Leaks from fittings rather than the bath
- An acrylic bath that flexes badly underfoot
Not sure? Send photos and we will give you a straight answer before booking.
Materials we work on in Camlachie
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
Bath re-enamelling in Camlachie without replacing anything
Many of the baths we re-enamel are period roll-tops, which would be difficult and expensive to replace. Doing them in place keeps an original feature. Our technicians work on acrylic baths, cast iron baths and basins & shower trays, and people most often call us about wear marks under the taps and a bath that stays dull however much you clean it.
All our work is covered by our one-year guarantee.
- Area
- Camlachie (G31, G40, G32)
- Area hub
- Glasgow
- Warranty
- One year on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Materials and what they mean for the repair
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Keeping it looking good
Most damage we see is avoidable. These habits help:
- Wipe the bath dry after use in hard water areas
- Have chips seen to early
- Avoid suction-cup mats
- Keep toiletries on a shelf rather than in the bath
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Fix dripping taps quickly.
If a previous coating is starting to peel, do not pick at it. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
Places near Camlachie
What else we do in Camlachie
Signs you need bath re-enamelling in Camlachie
Older baths often have several problems at once: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
It’s worth getting a quote if you see:
- Lots of chips and rust spots
- Wear marks under the taps
- A bath in a colour that no longer suits
- Brown or grey marks that don’t clean off
What to look for in a quote
- Whether the colour is mixed to match
- Whether the price covers travel
- What happens if they find more damage
- Whether a trained technician does the job
Camlachie questions
Is the work guaranteed?
All our work carries a one-year guarantee. We will explain what it covers when we quote.
Will the bath be moved?
No. We resurface it in place, so the tiles and taps stay put.
Can you quote from pictures?
Nearly always. If pictures do not show enough, we will ask for another angle.
How quickly can you book me in?
Your quote comes with available dates. Tell us if you need it done quickly.
Can you re-enamel a roll-top bath?
Yes, often. We resurface the inside, and the outside can be refinished too.
Can you change the colour of my bath?
Yes, white is the usual choice. Mention the colour you want when you send pictures.
How long does re-enamelling take?
Normally a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
Can I add another job to the visit?
Yes. Doing several items on one visit normally costs less than separate visits. Include photos of each item.
Camlachie and nearby
Camlachie is about 2 miles east of Glasgow, in Glasgow. Across the G31 area, we carry out the work at your property. Camlachie is one of 183 towns and villages in Glasgow where we work.
We cover every part of G31, G40 and G32 and the streets around it. Jobs here include addresses on Yate Road, Appin Road and Stamford Road. Close by, we cover Barrowfield (1 mile south), Gallowgate (1 mile west), Dennistoun (1 mile north), Haghill (1 mile north-east) and Bridgeton (1 mile south-west). Within a short drive, we also cover Hillhead (3 miles north-west), Dowanhill (4 miles north-west), Woodlands (3 miles north-west), Woodside (3 miles north-west), North Kelvinside (3 miles north-west) and Partickhill (4 miles west).
Local landmarks in Camlachie
Around Camlachie, we work in homes near 1 pub, Glasgow Women's Library and Glasgow and the streets around them. Other local landmarks include Our Lady of Good Counsel Church (0.7 miles north-west) and St Mungo's Academy (under half a mile west). There’s a railway station in Camlachie itself: Duke Street station. Well-known places in the area include Bridgeton Bus Garage (0.5 miles south-west) and The Forge Shopping Centre (0.5 miles east). For a walk, there is Cathkin Braes and Lenzie Moss.
Should you replace it?
Replacing the bath means a plumber, lifting out the old bath, making good the walls and tiles and days without a bathroom. Resurfacing renews the whole surface with the bath left where it is. Our bath re-enamelling starts from £350. There are no surprise extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
What you get with us
- One price list for the entire UK
- One visit for most repairs
- Free fixed quotes from pictures
- CHAS, Constructionline and SafeContractor accredited
Read our full price list and bath cost comparison.
Work for landlords and builders
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
What happens on the day
Visits start with a quick look at the job together, so there are no surprises. Next, we cover and mask everything nearby and the work begins. You can expect it to take the best part of a day.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the next day.
Before we arrive
- Tell us if there are stairs or a lift
- Tell us about any previous repairs or coatings
- Let us know about parking or access
How to get a price
The quickest way to a price is to send a couple of pictures using our quote form or call us. We’ll tell you honestly if a repair is the right fix.
Related advice
DIY kit or professional repair?
If you’re set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
About our accreditations · Every repair comes with a one-year guarantee.
