Hampshire · England
Bath re-enamelling & resurfacing in Carter's Clay, Hampshire
Full bath re-enamelling and resurfacing in Carter's Clay, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- An outdated colour you’d like to change
- Staining under the taps and around the waste
Bath re-enamelling at your home in Carter's Clay
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. Common call-outs are for chips and rust in more than one place and an outdated colour you’d like to change, across acrylic baths, basins & shower trays and Victorian roll-tops.
Every repair is covered by our one-year guarantee.
- Where
- Carter's Clay (SO51)
- County
- Hampshire
- Cover
- A year, on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Should you replace it?
Getting a cast iron bath out is hard work: they’re heavy, often need breaking up, and a new one isn’t cheap. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. A repair normally costs much less than people expect, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.
Why choose Surface Doctor in Carter's Clay
- Dust sheets down, tidy finish
- Honest advice, even when it means no job
- CHAS and Constructionline accredited
- One visit for most repairs
Read our full price list and bath cost comparison.
When we would advise against a repair
It helps to know what we can’t do too:
- Acrylic that moves when you stand in it
- Problems we can’t see until an old finish comes off
- Leaking taps or wastes (a plumber’s job)
If in doubt, send pictures and we’ll say what we think.
Materials we repair
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
Places near Carter's Clay
What else we do in Carter's Clay
Carter's Clay and nearby
Carter's Clay is about 4 miles north-west of Romsey, in Hampshire. Anywhere in SO51, we come to you. We cover 683 places in Hampshire, from the larger towns to small villages. We work right across the region, from Carter's Clay to London (72 miles away).
Every address in SO51 is within our area, from the main roads to the quietest streets. Whether you live on The Banks and Carter's Clay Road or a nearby road, a technician can come to you. Neighbouring places we cover include Lockerley (1 mile north-west), Awbridge (1 mile south-east), Dunbridge (1 mile north-east), Kimbridge (2 miles north-east) and Sherfield English (2 miles south-west). We also work in nearby towns such as Winchester (11 miles east), Eastleigh (10 miles east), Andover (14 miles north), Totton (7 miles south), Chandler's Ford (8 miles east) and Hedge End (13 miles south-east).
Around Carter's Clay
We visit homes around Kings Arms Public House and Awbridge Primary School, among other places. Carter's Clay’s nearest station is Mottisfont & Dunbridge station, roughly 1.2 miles north-east. A little further out are Romsey Community Hospital (4 miles south-east) and King Johns House (3.4 miles south-east).
Landlord and trade work in Carter's Clay
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Landlords, letting agents and housing providers in Carter's Clay use us as well as householders. Repairing between tenancies keeps void periods short, and it usually costs far less than a refit.
Signs you need bath re-enamelling in Carter's Clay
Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. After years of use, the surface becomes porous and stains easily.
The things clients generally mention when they call are:
- A period or roll-top bath worth keeping
- Enamel that’s lost its shine and feels rough
- Staining under the taps and around the waste
- Chips and rust in more than one place
Questions to ask before you book
- Whether the price covers travel
- How long it needs to cure
- What happens if the damage is worse than the photos show
- What the guarantee covers, and for how long
Questions from Carter's Clay
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Is there a call-out fee?
Travel is included in the price, and we charge the same wherever you are.
Is it messy?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
How long does re-enamelling last?
Look after it and it lasts. Gentle cleaning, no suction mats.
When can you do it?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
Do I need to be at home?
We need someone to let us in. After that, you can carry on with your day.
Can you repair something that’s been repaired before?
Normally, yes. The old repair comes out first, so let us know about it.
Can you re-enamel a roll-top bath?
Yes, frequently. The inside is resurfaced, and we can refinish the outside as well.
Repairs by material
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Aftercare tips
Much of the damage we repair could have been avoided. These habits help:
- Wipe the bath dry after use in hard water areas
- A dripping tap should be fixed promptly
- Use washing-up liquid and a soft cloth
- Rinse off hair dye, oils and bath bombs right away
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
The process
On the day itself, there’s little for you to do. Let us in and show us the room, and we’ll get on with it. The job generally runs to the best part of a day.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- Once cured, normally by the next day, the bath is ready.
Getting ready for the visit
- Mention any earlier repairs or resurfacing
- Plan for the room to be out of bounds to pets and children
- Mention if the room is upstairs or in a flat
Getting a price
A quote takes minutes to ask for: photograph the damage, then the entire bath, include your postcode and send them to us. What comes back is a fixed price, not a guess.
Advice
What affects the price in Carter's Clay
Resurfacing from £350. We don’t charge extra for travel to Carter's Clay. The price depends on:
- How many items we do on one visit
- The colour and finish to match
- Whether old repairs or coatings need taking off
- Access to the area
Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
Getting a price from photos
Photographing the damage takes a minute, and it saves a visit. Please include:
- The postcode, so we can plan the visit
- One sharp close-up of the damage
- The material, if you know it
- Details of any past repairs
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price.
About our accreditations · Every repair comes with a one-year guarantee.
