Lincolnshire · England
Bath Re-enamelling for Cawthorpe homes
Damaged bath in Cawthorpe? We repair it in place, match it on site and guarantee the work for a year.
- Resurfacing from £350
- A coating lifting around the plughole
- Thin, worn enamel in places
Bath re-enamelling in Cawthorpe without replacing anything
If your bath is sound but looks tired, re-enamelling is usually the most cost-effective option. It avoids removal, plumbing and re-tiling. Our technicians work on basins & shower trays, acrylic baths and pressed steel baths, and the jobs we see most are a roll-top that’s seen better days and an old resurfacing that’s failing.
All of our repairs are guaranteed for twelve months in Cawthorpe and everywhere else. If something goes wrong with the work, we come back.
- Location
- Cawthorpe (PE10)
- Area hub
- Lincolnshire
- Warranty
- One year on every repair
- Price
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Landlord and trade work in Cawthorpe
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which is easier on the people living there.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
Other services in Cawthorpe
DIY repairs versus a professional job
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
If you do try a kit, read the instructions carefully, and don’t use it until it has fully cured. If it fails, we can still put it right.
Common problems we fix in Cawthorpe
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
Get in touch if you’ve noticed any of these:
- Thin, worn enamel in places
- Several chips and rust patches
- Staining under the taps and around the waste
- An outdated colour you’d like to change
Questions to ask before you book
- How your room will be protected
- Whether the price covers travel
- Whether the price is fixed and includes VAT
- Who turns up on the day
When we’d advise against a repair
A few problems are outside what a surface repair can do:
- Holes rusted through the metal
- A metal bath with a through crack
- Plumbing leaks, which need a plumber
Not sure? Send photos and we’ll give you a straight answer.
Materials we repair
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Cast iron baths
Cawthorpe: your questions answered
Can you do the outside of a roll-top?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
Can you fix a peeling bath coating?
In most cases. We strip the failing coating and resurface it properly. Mention it when you send photos.
Is my repair covered?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Will the bath be moved?
No. We resurface it in place, so nothing else is disturbed.
How quickly can you book me in?
It depends on the time of year and where you are. We will offer you dates when we send your quote.
I rent my home. Can I book you?
Yes. Check with your landlord; we can send the quote to them too.
Will it make a mess?
No. The work area is masked and covered, and we leave the room clean.
It’s been repaired before. Can you still fix it?
Yes, we often do. Removing the old work can add time, and that’s in the quote.
Cawthorpe and nearby
Cawthorpe is about 1 mile north of Bourne, in Lincolnshire. Across the PE10 area, we come to you. Cawthorpe is one of 732 places in Lincolnshire where we work. You can also see our page for Birmingham, about 67 miles away.
Postcode districts we cover here: PE10. We also cover the places around Cawthorpe: Dyke (1 mile east), Bourne (1 mile south), Austerby (2 miles south-east), Eastgate (2 miles south-east) and Northorpe (3 miles south). Within a short drive, we also cover Grantham (14 miles north-west), Spalding (9 miles east), Stamford (10 miles south-west), Sleaford (15 miles north), Market Deeping (8 miles south) and Pinchbeck (10 miles east).
Around Cawthorpe
In Cawthorpe, that means homes near St. Gilbert's Catholic Church and Bourne Academy. Well-known places in the area include Bourne Castle (1.4 miles south). For a walk, there is Baston Fen.
Repair or replace in Cawthorpe?
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Prices start from £350. We charge the same wherever you are, so there’s no premium for Cawthorpe. The job itself decides the price: the material, the amount of damage and how many items.
Why us?
- Colour mixed on the day to match
- Fixed prices from your pictures
- Rooms protected and left tidy
- We come to you, anywhere in the UK
See our full price list and guide to resurfacing and replacement costs.
The process
There is not much you need to do on the day. Show us the job, point us to the room, and we’ll get on with it. The job generally runs to a full day, tidy-up included.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Let us know if it has been repaired before
- Mention if the room is upstairs or in a flat
- Have somewhere for us to park nearby if possible
Ask for a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed quote the same day in most cases.
Read more
Materials and what they mean for the repair
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Aftercare tips
Looking after the surface is easy:
- Clean with a soft cloth and mild detergent
- Dry the bath after use to stop limescale
- Avoid suction-cup mats
- Rinse off hair dye, oils and bath bombs right away
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Rust spots on a worn bath get worse with time and make the job bigger. It’s simpler to resurface before they spread.
About our accreditations · Every repair comes with a one-year guarantee.
