Lincolnshire · England
Bath re-enamelling & resurfacing in Dyke, Lincolnshire
Fixed-price bath re-enamelling in Dyke and the surrounding area, generally in one visit and guaranteed for a year.
- Resurfacing from £350
- An outdated colour you’d like to change
- An old resurfacing that’s failing
Bath re-enamelling in Dyke without replacing anything
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. We are often asked to fix a coating lifting around the plughole and a bath in a colour that no longer suits, in Victorian roll-tops, pressed steel baths and acrylic baths.
A one-year guarantee comes as standard, so you are covered after the visit.
- Where
- Dyke (PE10)
- County
- Lincolnshire
- Cover
- A year, on every repair
- Price
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
When a repair is not the answer
A few problems are outside what a surface repair can do:
- Steel that has corroded right through
- A cast iron or steel bath that is cracked right through
- Leaking taps or wastes (a plumber’s job)
Not sure? Send pictures and we’ll give you a straight answer.
Surfaces we repair
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
Other services in Dyke
Do you need bath re-enamelling in Dyke?
Enamel does not fail overnight. Abrasive cleaners, limescale and years of use wear the gloss away, starting where water runs and sits.
You may need us if you’ve spotted any of these:
- A bath in a colour that no longer suits
- A peeling or bubbling previous coating
- Chips and rust in more than one place
- Wear marks under the taps
What to look for in a quote
- How the room is protected while they work
- The length of the guarantee and what it covers
- Who will actually do the work
- Whether the price is fixed and includes VAT
Should I try a DIY kit first?
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
If you’re set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it fails, we can still put it right.
How the visit works
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the job takes most of the day, and we finish by cleaning up and talking you through the result.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
Preparing for the visit
- Let the surface dry out before the visit
- Ensure the room can be ventilated
- Tell us if there are stairs or a lift
How to get a price
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Read more
Keeping it looking good
Once the work has cured, treat it gently:
- Wipe the bath dry after use in hard water areas
- Keep toiletries on a shelf rather than in the bath
- Get any chip repaired quickly
- Leave the bath for the full curing time before using it
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Repairing versus replacing in Dyke
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Our bath re-enamelling starts from £350. A repair usually costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
What you get with us
- CHAS, Constructionline and SafeContractor accredited
- Honest advice, even when it means no job
- Normally one visit, start to finish
- Colour-matched on site
Read our full price list or resurfacing vs replacement cost guide.
For landlords and businesses
We regularly work with letting and managing agents. Just send photos, the address and how to get access.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Where we work around Dyke
Dyke is about 2 miles north of Bourne, in Lincolnshire. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Our repair technicians cover all 732 towns and villages in Lincolnshire. We work right across the region, from Dyke to Birmingham (68 miles away).
Here we cover the PE10 postcode area. That includes homes on Redmile Close, Main Road and Dyke Drove. Other places close to Dyke include Cawthorpe (1 mile west), Eastgate (2 miles south), Austerby (2 miles south), Bourne (2 miles south) and Northorpe (3 miles south). Within a short drive, we also cover Grantham (15 miles north-west), Spalding (9 miles east), Stamford (11 miles south-west), Sleaford (14 miles north), Market Deeping (8 miles south) and Pinchbeck (9 miles east).
What’s near Dyke
In Dyke, that means homes near The Morton Church of England (Controlled) Primary School, Church of St John the Baptist and Bourne Academy, among other places. Further afield, we also cover the area around Bourne Castle (1.7 miles south-west). The countryside around Dyke includes Baston Fen.
What bath re-enamelling costs
Resurfacing from £350. We give every job a fixed price from pictures. This is what makes a difference:
- What the surface is made of
- How many items we do on one visit
- Previous DIY repairs that have to come out
- The colour and finish to match
The price reflects the work involved, not your postcode. The full price is agreed before booking.
How to get a fixed price
Phone pictures are fine. Ensure they show:
- Daylight if possible, and no flash reflection
- What it’s made of, if you know
- A clear, close picture of the problem area
- Details of any past repairs
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Questions from Dyke
Will the price change on the day?
The price is fixed for what the pictures show. Anything extra is discussed before we begin.
How do I book?
Some photos, your postcode and how to reach you. On the day, we only need access to the room.
Will you leave a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Is there a smell?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
What happens after I send pictures?
We review the photos and send a fixed quote and the next dates we have.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
How soon can you come?
Your quote comes with available dates. Tell us if you need it done quickly.
Is there any odour?
A little, depending on the job. Open windows and an extractor fan help, and it soon fades.
About our accreditations · Every repair comes with a one-year guarantee.
