Ceredigion · Wales
Bath re-enamelling & resurfacing in Cellan, Ceredigion
Bath re-enamelling in and around Cellan: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Worn patches where water runs and sits
- A bath that stays dull however much you clean it
Aftercare tips
To keep it looking its best:
- Keep toiletries on a shelf rather than in the bath
- Do not leave a chip unrepaired
- Wash away dyes and oils after use
- Repair dripping taps early
Dry the bath after use if possible, especially in hard water areas, and rinse away any product left on the surface.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
Bath re-enamelling in Cellan, done in place
After re-enamelling, the bath has a smooth, glossy, new-looking surface, but without the cost and upheaval of a refit. It suits anyone happy with the bathroom apart from the bath. We regularly repair basins & shower trays, Victorian roll-tops and acrylic baths, and common reasons people contact us are a bath that stays dull however much you clean it and wear marks under the taps.
We guarantee the work for a year. If something isn’t right in that time, we come back and put it right.
- Location
- Cellan (SA48)
- Region
- Ceredigion
- Guarantee
- One year on every repair
- Price
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Common questions in Cellan
Will there be fumes?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It clears as the finish cures.
Is repairing better than replacing?
Normally, when the rest is in good condition. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
Do you work in Cellan?
Yes. We cover the entire UK and come to Cellan and the rest of Ceredigion. Send us photos for a fixed quote, or call 0345 017 0787.
Is there any odour?
A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.
Can you fix a peeling bath coating?
In most cases. The old coating comes off before we resurface it. Mention it when you send pictures.
Do you charge for travel?
Travel is included in the price, with the same prices everywhere we work.
Will the price change on the day?
The price is fixed for what the pictures show. Anything extra is discussed before we begin.
Do I need to be at home?
Yes. We need access to the room while we work, at a time we agree with you.
What your bath is made of matters
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
The process
We turn up when we said we would, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. Most visits take the best part of a day, and the room is left clean and tidy.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- Once cured, normally by the day after, the bath is ready.
How to prepare
- Tell us if there are stairs or a lift
- Point us to the nearest place to park
- Mention any earlier repairs or resurfacing
Get a quote
We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.
Advice
Places near Cellan
Other services in Cellan
Should I try a DIY kit first?
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.
When we’d advise against a repair
To be straight with you, there are a few things a repair won’t fix:
- A metal bath with a through crack
- Steel that has corroded right through
- Problems we can’t see until an old finish comes off
Not sure? Send pictures and we’ll give you a straight answer before booking.
Materials we work on in Cellan
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
Prices and what affects them
Resurfacing from £350. Quotes are free and the price is fixed. What we look at:
- The colour and finish to match
- Whether we combine several jobs
- How easy the damage is to reach
- The type of damage
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send photos and you will get a fixed figure.
How to get a fixed quote
You can take the photos on your phone. Just ensure we can see:
- Any details about the material
- A clear, close picture of the problem area
- Natural light rather than flash
- A coin beside the damage so we can judge size
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed quote.
Landlord and trade work in Cellan
We carry out planned and one-off repairs for housing associations and facilities teams in Ceredigion and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
Covering Cellan
Cellan is about 21 miles north-east of Carmarthen, in Ceredigion. We travel to homes and businesses in Cellan and the surrounding area, so you do not need to take anything anywhere. We cover all 125 towns and villages in Ceredigion.
Jobs in SA48 are booked in the same way as anywhere else. Other places close to Cellan include Ram (1 mile south-west), Treherbert (1 mile south-west), Cwmann (1 mile south-west), Lampeter (2 miles west) and Pentre-bâch (2 miles west). Within a short drive, we also cover Aberaeron (13 miles north-west), New Quay (15 miles north-west) and Llandysul (12 miles south-west).
Around Cellan
Our clients here include homes close to Fishers Arms and Church of All Saints and the streets around them. Further afield, we also cover the area around Bryn Maen Caerau (less than half a mile south-west) and University of Wales (1.4 miles west). For a walk, there’s Castell Allt-goch and Llyn y Gwaith.
Signs you need bath re-enamelling in Cellan
Enamel does not fail overnight. Years of cleaning, hard water and hot baths dull the surface, starting where water runs and sits.
Common reasons people in Cellan contact us are:
- An original cast iron bath that needs restoring
- Wear marks under the taps
- Lots of chips and rust spots
- A bath in a colour that no longer suits
Comparing quotes
- What prep work is covered
- How the room is protected while they work
- How the colour is matched
- What the guarantee covers, and for how long
About our accreditations · Every repair comes with a one-year guarantee.
