Northamptonshire · England
Bath re-enamelling & resurfacing in Chacombe, Northamptonshire
Bath re-enamelling for Chacombe, without a refit. Get a fixed quote from your pictures, then book a visit.
- Resurfacing from £350
- Brown or grey marks that don’t clean off
- A coating lifting around the plughole
Where we work around Chacombe
Chacombe is about 3 miles north-east of Banbury, in Northamptonshire. Whether you are in the middle of Chacombe or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Our technicians cover all 364 towns and villages across Northamptonshire, from the larger towns to small villages. Our nearest city page is Birmingham, about 37 miles away.
Here we cover the OX17 postcode area. From Beanfurlong, Thorpe Road and The Ring or a nearby road, we can come to you. Other places close to Chacombe include Middleton Cheney (1 mile south-east), Thenford (2 miles south-east), Overthorpe (2 miles south-west), Thorpe Mandeville (2 miles east) and Marston St Lawrence (3 miles east). Further out, we also cover Daventry (13 miles north), Brackley (7 miles south-east), Towcester (13 miles east), Everdon (14 miles north), Hinton (6 miles north-east) and Silverstone (11 miles east).
Local landmarks in Chacombe
We visit homes around Church of St Peter and St Paul, George And Dragon Public House and Chenderit School and the streets around them. Chacombe’s nearest station is Banbury station, roughly 2.9 miles south-west of the centre. Well-known places in the area include Banbury Castle (3 miles south-west) and Horton General Hospital (3.5 miles south-west). Not far away are Farthinghoe Nature Reserve and Crouch Hill.
About our bath re-enamelling in Chacombe
Resurfacing renews the entire surface of the bath without taking anything out. It suits baths that are dull, stained, rough or chipped all over. We work on acrylic baths, pressed steel baths and basins & shower trays, and people most frequently call us about several chips and rust patches and staining under the taps and around the waste.
We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it.
- Location
- Chacombe (OX17)
- Region
- Northamptonshire
- Cover
- One year on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Why repair rather than replace?
A replacement frequently means several trades over several days. Resurfacing takes one technician and usually a day. Our bath re-enamelling starts from £350. The price reflects the work involved, not where you live. You will see the full price before you book.
What you get with us
- Technicians who travel to you, UK-wide
- Honest advice, even when it means no job
- A fixed quote before booking
- CHAS and Constructionline accredited
Take a look at our full price list and guide to resurfacing and replacement costs.
DIY repairs versus a professional job
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.
Different materials, different repairs
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Prices and what affects them
Prices start from £350. You won’t pay by the hour. The price is based on:
- How many areas need work
- The material
- Unusual colours or finishes
- Access to the area
Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it.
Send pictures for a quote
You can generally get a fixed price without us visiting. To make it quick:
- A clear, close picture of the problem area
- One picture of the whole bath
- A coin or ruler next to the damage for scale
- What it’s made of, if you know
You do not need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
How to look after the repair
Aftercare is simple:
- Never use suction bath mats
- Respect the curing time we give you
- Clean with a soft cloth and mild detergent
- Rinse off hair dye, oils and bath bombs immediately
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.
The process
Arrival times are agreed in advance. On site, it takes a full day for most jobs. We leave the room clean and you will know when it can be used.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s normally ready the next day.
Before we arrive
- Clear toiletries, mats and anything else from around the area
- Make sure the area is dry
- Let us know about parking or access
Get a quote
The quickest way to a price is to send a couple of pictures using our quote form or ring us. We’ll say right away whether it can be repaired.
Read more
Landlords, agents and businesses in Chacombe
Housing associations and facilities teams use us for planned and reactive repairs in Northamptonshire and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Landlords, letting agents and housing providers in Chacombe use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Signs you need bath re-enamelling in Chacombe
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
Get in touch if you’ve noticed:
- A coloured bath you want in white
- Worn patches where water runs and sits
- Staining under the taps and around the waste
- An original cast iron bath that needs restoring
Comparing quotes
- When it can be used again
- How to look after the finish
- Whether they match the colour on site
- What happens if the damage is worse than the pictures show
Places near Chacombe
More services for Chacombe
Chacombe: your questions answered
Do you resurface freestanding baths?
Yes. Inside and out if you’d like.
Will there be a smell?
Expect a mild smell while we’re working that clears as it cures.
Is a repair better than a new one?
Typically, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
Can you redo someone else’s repair?
Usually, yes. We remove the old repair before doing a new one, so mention it when you send pictures.
Can I add another job to the visit?
Yes. Doing several items on one visit usually costs less than separate visits. Send pictures of everything you’d like done.
How soon can you come?
Your quote comes with available dates. If it’s urgent, say so and we will do what we can.
Do you work in Chacombe?
Yes. We cover the whole UK and travel to Chacombe. Send us pictures for a fixed quote, or call 0345 017 0787.
Do you do work for letting agents?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across Northamptonshire.
About our accreditations · Every repair comes with a one-year guarantee.
