Bolton · England
Bath Re-enamelling for Chew Moor homes
Fixed-price bath re-enamelling in Chew Moor and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- Worn patches where water runs and sits
- Stains that will not shift
About our bath re-enamelling in Chew Moor
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. If you’re dealing with staining under the taps and around the waste and a coating lifting around the plughole, we can generally put it right, whatever the material.
The work is guaranteed for twelve months. If there is a problem with the repair within the year, we return and sort it.
- Location
- Chew Moor (BL6)
- Area hub
- Bolton
- Warranty
- One year on every repair
- Price
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Do you need bath re-enamelling in Chew Moor?
Older baths often have several problems at once: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
Signs it’s time to call us include:
- A dull, rough surface that won’t come clean
- An old resurfacing that is failing
- Brown or grey marks that do not clean off
- An outdated colour you’d like to change
Questions to ask before booking
- How long it needs to cure
- Whether the price covers travel
- What the guarantee covers, and for how long
- What aftercare is recommended
When we would advise against a repair
We will always be straight with you, so here’s what a repair will not do:
- Leaks from fittings rather than the bath
- A metal bath with a through crack
- Holes rusted through the metal
Send us pictures and we’ll tell you honestly before booking.
Surfaces we repair
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
How the visit works
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take most of the day. We clean up when we are done and let you know when you can use it again.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the next day.
How to prepare
- Tell us about any previous repairs or coatings
- Have a window or extractor fan available
- Mention any parking restrictions or tricky access
Get a quote
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.
Related advice
For landlords and businesses
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Housing associations and facilities teams use us for planned and reactive repairs in Bolton and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
About Chew Moor
Chew Moor is about 1 mile north-east of Westhoughton, in Bolton. We travel to homes and businesses in Chew Moor and the surrounding area, so nothing has to leave your home. Chew Moor is one of 61 places in Bolton where we work. We work right across the region, from Chew Moor to Manchester (13 miles away).
We cover every part of the BL6 postcode area and the streets around it. We regularly work on streets such as Tempest Road, Havisham Close and Tempest Chase and the roads around them. Neighbouring places we cover include Wingates (1 mile west), Westhoughton (1 mile south-west), Four Gates (2 miles west), Middlebrook (2 miles north-west) and Cooper Turning (2 miles west). We also work in nearby towns such as Bolton (3 miles north-east), Horwich (3 miles north-west), Halliwell (3 miles north-east), Farnworth (4 miles east), Great Lever (3 miles east) and Kearsley (5 miles east).
What’s near Chew Moor
Locally, our jobs take us to homes close to The Lostock Arms, Ladybridge High School and St Thomas & St John Lostock Parish Church. The nearest railway station is Lostock station, about 0.6 miles north-east of the centre. Well-known places in the area include Bolton Royal Infirmary (2.7 miles north-east) and Blackrod Castle Croft (3.6 miles north-west). Open spaces near Chew Moor include Noon Hill.
How we price bath re-enamelling
Prices start from £350. We don’t charge extra for travel to Chew Moor. The price depends on:
- Whether we combine several jobs
- What the surface is made of
- Previous DIY repairs that have to come out
- How easy the damage is to reach
The price reflects the work involved, not your postcode. You will see the full price before you book.
Quotes from your pictures
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- A coin or ruler next to the damage for scale
- A close-up of the damage, in focus
- Where you are, by postcode
- A picture taken from further back
Send us pictures of the damage and a wider shot of the entire item, with your BL6 postcode, and we will come back with a fixed quote.
FAQs for Chew Moor
Can you fix a peeling bath coating?
Typically, yes. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
How much does bath re-enamelling cost in Chew Moor?
Prices start from £350. Every job gets a fixed price from your photos. Send a close-up and a photo of the entire item with your BL6 postcode.
Do I need to be at home?
Yes. We need access to the room while we work, at a time we agree with you.
What happens if you find more damage?
We will show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.
Can you do more than one item on the same visit?
Of course, and it typically saves money. Just add the extra items to your photos and you will get one combined price.
Will there be fumes?
Some odour is normal while we spray, which is why we ventilate the bathroom. It clears as the finish cures.
Can you re-enamel a roll-top bath?
Yes. Inside and out if you’d like.
How do I book?
Photos of the damage, a picture of the whole bath and your postcode. After that, we just agree a date.
Nearby places to Chew Moor
Also in Chew Moor
Should you replace it?
Getting a cast iron bath out is hard work: they’re heavy, often need breaking up, and a new one isn’t cheap. Resurfacing in place avoids that entirely. Our bath re-enamelling starts from £350. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
What you get with us
- Free fixed quotes from pictures
- Generally one visit, start to finish
- Every repair guaranteed for a year
- Dust sheets down, tidy finish
Take a look at our pricing or bath cost comparison.
Aftercare tips
To keep it looking its best for years:
- Rinse off hair dye, oils and bath bombs immediately
- Never use suction bath mats
- A dripping tap should be fixed promptly
- Get any chip repaired quickly
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Repair dripping taps promptly.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Materials and what they mean for the repair
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
About our accreditations · Every repair comes with a one-year guarantee.
