Bristol · England
Bath Re-enamelling in Chittening
Bath re-enamelling for Chittening, without a refit. Get a fixed quote from your photos, then we come to you.
- Resurfacing from £350
- Brown or grey marks that do not clean off
- A bath that stays dull however much you clean it
Our work in Chittening
Chittening is about 4 miles west of Patchway, in Bristol. Book a date that suits you, and you will know when to expect us, so there’s no waiting around. Our repair technicians cover all 89 towns and villages in Bristol, from the larger towns to small villages. Our nearest city page is Birmingham, about 73 miles away.
Our repair technicians cover all of BS11 and BS10 and the streets around it. That includes homes on Bank Road, Worthy Road and Chittening Road. We also travel to Hallen (2 miles south-east), Berwick (2 miles east), Lawrence Weston (2 miles south), Avonmouth (2 miles south) and Severn Beach (2 miles north). Within a short drive, we also cover Bristol (6 miles south-east), Montpelier (6 miles south-east), Easton (7 miles south-east), Bedminster (7 miles south-east), Cotham (5 miles south-east) and Canon's Marsh (6 miles south-east).
What’s near Chittening
In Chittening, that means homes near St Bede's Catholic College and the streets around them. The nearest railway station is St Andrews Road station, about 1.5 miles south-west of the centre. Other landmarks nearby include Brentry Hospital (3.1 miles south-east) and The Mall (3.5 miles east). Green spaces nearby include Tarn Lake and Portbury Ashlands.
Bath re-enamelling in Chittening, done in place
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. We work on Victorian roll-tops, acrylic baths and basins & shower trays, and common reasons people contact us are wear marks under the taps and a roll-top that’s seen better days.
Big or small, it’s backed by a one-year guarantee in Chittening and across Bristol.
- Where
- Chittening (BS11, BS10)
- Region
- Bristol
- Cover
- 12 months on all our work
- Price
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Towns and villages near Chittening
Other services in Chittening
Honest limits
It helps to know what we can’t do too:
- Anything hidden under an old coating, until we remove it
- Steel that has corroded right through
- Acrylic that moves when you stand in it
Send us photos and we will tell you honestly.
Materials we work on in Chittening
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
Why repair rather than replace?
A new bath means a plumber, lifting out the old bath, re-tiling or making good the walls and days without a bathroom. Resurfacing renews the whole surface with the bath left where it is. Our bath re-enamelling starts from £350. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.
Why Chittening customers choose us
- Same prices wherever you are
- Colour-matched on site
- Rooms protected and left tidy
- Every repair guaranteed for a year
See our full price list or guide to resurfacing and replacement costs.
Your questions about bath re-enamelling in Chittening
Is my repair covered?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Can tenants book a repair?
Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted before the end of a tenancy.
Do you work in Chittening?
Yes, we do. We send a technician to Chittening for every job, and the price is the same as everywhere else.
How do I book?
A close-up, a wider photo and your postcode. After that, we just agree a date.
Will the bath be moved?
No, it stays where it is. Everything is done in your bathroom, with the room protected and ventilated.
Can you do the outside of a roll-top?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
Repairs by material
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Keeping it looking good
How the surface is treated afterwards matters. Here’s what we suggest:
- Store bottles off the bath
- Respect the curing time we give you
- Have chips seen to early
- Never use suction bath mats
The first few days matter most: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
On a worn bath, rust spots keep spreading and make the job bigger. Resurfacing before they spread keeps it simpler.
Prices and what affects them
Resurfacing from £350. There’s no area surcharge for Chittening. The price reflects:
- Where the damage is and how we get to it
- What the surface is made of
- Unusual colours or finishes
- Any earlier repairs that need removing first
There are no surprise extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Getting a price from photos
It only takes a minute to photograph the damage, and it saves a visit. Please include:
- Whether it’s been repaired or coated before
- Something in shot to show the size
- A clear, close picture of the problem area
- The material, if you know it
The quickest way to a price is to send a couple of photos through our quote form or ring us. We’ll say straight away if a repair is the right fix.
What happens on the day
A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, carry out the work and clear up. Plan for a full day. Before leaving, we tell you how long to leave it and what to avoid for the first few days.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s generally ready the next day.
Before we arrive
- Mention if the room is upstairs or in a flat
- Open a window if you can
- Keep pets and children out of the room while we work
Get a quote
Upload a photo of the damage and a wider shot of the entire item, with your BS11 postcode, and we’ll come back with a fixed quote.
Read more
Landlords, agents and businesses in Chittening
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Common problems we fix in Chittening
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
If you can see any of these, send us a photo:
- Worn patches where water runs and sits
- A dull, rough surface that won’t come clean
- A peeling or bubbling previous coating
- Chips and rust in more than one place
Questions to ask before booking
- What prep work is covered
- A fixed price, and whether VAT is included
- Whether there are any call-out or travel charges
- How changes to the job are handled
About our accreditations · Every repair comes with a one-year guarantee.
