North Yorkshire · England
Bath re-enamelling & resurfacing in Chop Gate, North Yorkshire
Problem with your bath in Chop Gate? We repair it in place, match it on site and guarantee the work for a year.
- Resurfacing from £350
- A dull, rough surface that won’t come clean
- A period or roll-top bath worth keeping
Repair or replace: which is better?
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Our bath re-enamelling starts from £350. We charge the same wherever you are, with no extra for Chop Gate. What changes the price is the job itself: how much damage, what it’s made of and how many items.
What you get with us
- Straight answers about what a repair can do
- Same prices wherever you are
- Fixed prices from your pictures
- Colours mixed by hand to suit your surface
See our pricing or bath cost comparison.
Bath re-enamelling at your home in Chop Gate
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. There is no removal, plumbing or tiling involved. Typical jobs include a roll-top that’s seen better days and a peeling or bubbling previous coating, in cast iron baths, Victorian roll-tops and acrylic baths.
Your repair is guaranteed for a year, as with every job we do.
- Area
- Chop Gate (TS9)
- Region
- North Yorkshire
- Warranty
- A year, on every repair
- Price
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Chop Gate: your questions answered
How much does bath re-enamelling cost in Chop Gate?
Prices start from £350. We give a fixed price based on pictures of the damage. Send a close-up of the damage and a wider photo and your postcode.
Are you accredited?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Do you cover the whole of North Yorkshire?
We cover the whole UK, including Chop Gate and the rest of North Yorkshire. Just include your postcode and we’ll offer you dates.
How soon can you come?
It depends on the time of year and where you are. Send pictures with your postcode and we will reply with the earliest dates.
What happens once I’ve sent photos?
We come back with a fixed price. You’re under no obligation.
Can I get a quote without a visit?
Yes, almost always. Clear photos let us give you a fixed quote without visiting.
Can pets and children be at home?
Please keep children and pets out of the room during the visit. The rest of the house is unaffected.
Do you work for landlords and businesses?
We do, regularly. We can quote for several properties together and work between tenancies.
Covering Chop Gate
Chop Gate is about 10 miles south of Guisborough, in North Yorkshire. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Chop Gate is one of 626 places in North Yorkshire where we work. We work right across the region, from Chop Gate to Leeds (about 43 miles away).
Every address in TS9 is covered, from the main roads to the quietest streets. We also cover the places around Chop Gate: Carlton in Cleveland (4 miles north-west), Kirkby (4 miles north), Great Broughton (4 miles north), Great Busby (4 miles north-west) and Faceby (4 miles north-west). We also work in nearby towns such as Northallerton (12 miles west), Thirsk (13 miles south-west), Stokesley (6 miles north), Sowerby (14 miles south-west), Kirkbymoorside (12 miles south-east) and Great Ayton (7 miles north).
Around Chop Gate
Our customers here include homes close to Church of St Hilda and The Buck Inn and the streets around them. Other landmarks nearby include Bumper Castle (4.6 miles south). The countryside around Chop Gate includes Cringle Moor.
When a repair isn’t the answer
We will not take on work that will not last, so here’s what a repair cannot put right:
- A bath split right through the body
- Plumbing leaks, which need a plumber
- Steel that has corroded right through
Send us pictures and we’ll tell you honestly before booking.
Materials we repair
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
Keeping it looking good
Nothing complicated is needed:
- Respect the curing time we give you
- Don’t leave bottles, razors or sponges standing on the surface
- Clean with a soft cloth and mild detergent
- Get any chip repaired quickly
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
On a worn bath, rust spots keep spreading and make the job bigger. Resurfacing before they spread keeps it simpler.
What affects the price in Chop Gate
Resurfacing from £350. A fixed quote means you know the cost before booking. We take into account:
- How many areas need work
- Unusual colours or finishes
- Whether old repairs or coatings need taking off
- Whether it’s a chip, crack, burn or wear
Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it.
Getting a price from pictures
Phone pictures are fine. Just ensure we can see:
- Natural light rather than flash
- A close-up of the damage, in focus
- Whether it’s been repaired or coated before
- A coin beside the damage so we can judge size
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed price without visiting.
When to call us in Chop Gate
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. That’s the point where re-enamelling makes sense.
Common reasons people in Chop Gate contact us include:
- Several chips and rust patches
- A coating lifting around the plughole
- A roll-top that’s seen better days
- Enamel that is lost its shine and feels rough
What your quote should include
- Is the price fixed, and does it include VAT?
- Whether a trained technician does the job
- Whether the colour is mixed to match
- How the room is protected while they work
Materials and what they mean for the repair
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Nearby places to Chop Gate
Also in Chop Gate
How the visit works
We begin by going over the job with you. Next, we cover and mask everything nearby and we start. Allow a full day.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the day after.
Before we arrive
- Have somewhere for us to park nearby if possible
- Let us know if it has been repaired before
- Keep children and pets away from the room on the day
Getting a price
Most customers in Chop Gate get their price from photos. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Advice
Can I fix it myself?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.
About our accreditations · Every repair comes with a one-year guarantee.
