Cambridgeshire · England

Bath Re-enamelling for Chrishall homes

Full bath re-enamelling and resurfacing in Chrishall, carried out at your home and guaranteed for a year.

  • Resurfacing from £350
  • An original cast iron bath that needs restoring
  • A coloured bath you want in white
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling near Chrishall

How the visit works

Arrival times are agreed in advance, so you know when to expect us. Once we’re there, the work takes most of the day for most jobs. The room is left tidy and you’ll know when it can be used.

  1. We mask and protect the room and ventilate it.
  2. Next we degrease the bath and fix chips and rust spots.
  3. The surface is prepared and a bonding primer applied.
  4. We spray on the new enamel finish in several coats.
  5. Once cured, normally by the day after, the bath is ready.

Preparing for the visit

  • Point us to the nearest place to park
  • Mention if the room is upstairs or in a flat
  • Clear the area around the damage

Getting a price

A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them over. What comes back is a fixed quote, not a guess.

Get a free quote

Advice

About our bath re-enamelling in Chrishall

When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. There’s no removal, plumbing or tiling involved. We regularly repair pressed steel baths, basins & shower trays and acrylic baths, and common reasons people get in touch are brown or grey marks that don’t clean off and a bath that stays dull however much you clean it.

You’re covered for a year from the day of the repair. Just call us if there is a problem and we’ll sort it.

Location
Chrishall (SG8)
Region
Cambridgeshire
Guarantee
A year, on every repair
Price
From £350. Free, fixed quote from pictures
Phone
0345 017 0787
Last updated
23 October 2026
Surface Doctor technician refinishing the outside of a roll-top bath

Chrishall: your questions answered

Is the work guaranteed?

Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.

Is a repair better than a new one?

In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we’ll tell you.

Do you hold any accreditations?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Will the bath be moved?

No. We resurface it in place, so the tiles and taps stay put.

Does re-enamelling smell?

There is some smell while the coating is applied, which is why we ventilate the bathroom. It clears as the finish cures.

What happens after I send pictures?

We come back with a fixed price, plus dates. You are under no obligation.

Does someone need to be in?

We need someone to let us in. After that, you can carry on with your day.

Is it OK to have pets in the house?

Just keep them out of the work area. We’ll let you know when it’s safe to use again.

For landlords and businesses

If you manage property in Chrishall, we can repair and quote for several addresses together. Just send photos for each address and we will price them together.

Housing associations and facilities teams use us for planned and reactive repairs in Cambridgeshire and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.

Looking after it afterwards

Good habits make a big difference to how long a repair lasts. Here’s what we suggest:

  • Wipe the bath dry after use in hard water areas
  • Wash away dyes and oils after use
  • Use washing-up liquid and a soft cloth
  • Leave the bath for the full curing time before using it

Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.

Do not try to scrub a worn bath back to shine. It removes more of the surface.

How we price bath re-enamelling

Prices start from £350. There’s no charge for travel to Chrishall. The price depends on:

  • Whether we combine several jobs
  • Any earlier repairs that need removing first
  • Whether it’s a chip, crack, burn or wear
  • How much damage there is

There are no surprise extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.

Send pictures for a quote

A couple of clear pictures is all it takes. It helps if you send:

  • A wider photo showing the entire bath
  • A clear, close picture of the problem area
  • What it’s made of, if you know
  • A coin or ruler next to the damage for scale

The quickest way to a price is to send two or three pictures through our quote form or ring us. We will tell you honestly whether it can be repaired.

When a repair isn’t the answer

We will not take on work that will not last, so these are the limits:

  • Plumbing leaks, which need a plumber
  • Steel that has corroded right through
  • Damage hidden under a previous coating, until it’s stripped back

Not sure? Send pictures and we will give you a straight answer before booking.

Materials we work on in Chrishall

  • Pressed steel baths
  • Acrylic baths
  • Basins & shower trays
  • Cast iron baths
  • Victorian roll-tops

Covering Chrishall

Chrishall is about 6 miles east of Royston, in Cambridgeshire. Across the SG8 area, we carry out the work at your property. We work in all 371 towns and villages across Cambridgeshire, from the larger towns to small villages. Our jobs stretch from Chrishall to London (38 miles away).

Our visits in SG8 are booked in the same way as anywhere else. From High Street, Church Road and Hog's Lane or anywhere nearby, a technician can come to you. If you are just outside Chrishall, we cover Crawley End (1 mile north), Elmdon (1 mile east), Upper Pond Street (2 miles south-east), Bridge Green (2 miles south-east) and Ickleton (4 miles north-east). Further out, we also cover Cambridge (12 miles north), Royston (6 miles west), Cambourne (15 miles north-west), King's Hedges (14 miles north), Arbury (13 miles north) and Chesterton (13 miles north).

Local landmarks in Chrishall

Locally, our jobs take us to homes close to The Red Cow pub and Church of the Holy Trinity and the streets around them. The nearest railway station is Great Chesterford station, about 4.2 miles north-east. Nearby you will also find The Warren (3.5 miles south-west). The countryside around Chrishall includes Fowlmere RSPB reserve.

Map of Chrishall © OpenStreetMap contributors

Why repair rather than replace?

Getting a cast iron bath out is hard work: they’re heavy, often need breaking up, and a new one is not cheap. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.

What you get with us

  • We come to you, anywhere in the UK
  • Honest advice, even when it means no job
  • Everything repaired in place
  • Colour-matched on site

Take a look at our pricing or guide to resurfacing and replacement costs.

Common problems we fix in Chrishall

Many baths we resurface have simply been well used, with nothing wrong except the surface. The body of the bath is normally perfectly sound.

Keep an eye out for these signs:

  • A bath in a colour that no longer suits
  • A coating lifting around the plughole
  • A roll-top that is seen better days
  • Staining under the taps and around the waste

What to look for in a quote

  • A fixed quote, and whether VAT is included
  • What happens if the damage is worse than the pictures show
  • Whether cleaning and preparation are in the price
  • What the guarantee covers, and for how long

Our hiring checklist

Different materials, different repairs

Roll-top and period baths

We can resurface a roll-top inside and out, and the outside can be refinished too.

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.