Powys · Wales
Bath Re-enamelling for Churchstoke homes
Full bath re-enamelling and resurfacing in Churchstoke, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- A coloured bath you want in white
About our bath re-enamelling in Churchstoke
Many of the baths we re-enamel are period roll-tops, which are heavy, hard to move and costly to replace. Resurfacing them in place keeps the original bath. Our repair technicians work on acrylic baths, cast iron baths and basins & shower trays, and common reasons people get in touch are stains that won’t shift and a coating lifting around the plughole.
The work is guaranteed for twelve months. If there’s a problem with the repair within the year, we return and sort it.
- Area
- Churchstoke (SY15)
- Region
- Powys
- Guarantee
- A year, on every repair
- Quote
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
For landlords and businesses
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Landlords, letting agents and housing providers in Churchstoke use us as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
How we price bath re-enamelling
Resurfacing from £350. We do not charge extra for travel to Churchstoke. The price depends on:
- The material
- Unusual colours or finishes
- Whether old repairs or coatings need taking off
- Where the damage is and how we get to it
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
How to get a fixed quote
Photographing the damage takes a minute. Try to send:
- A close-up of the damage, in focus
- A wider photo showing the entire bath
- Good light, ideally daylight, without flash glare
- What it’s made of, if you know
For a price in Churchstoke, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
When a repair isn’t the answer
Some jobs aren’t right for a repair, including:
- Leaking taps or wastes (a plumber’s job)
- A cast iron or steel bath that is cracked right through
- Damage hidden under a previous coating, until it’s stripped back
If in doubt, send photos and we’ll say what we think before you book.
Materials we repair
- Basins & shower trays
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
Should I try a DIY kit first?
A DIY attempt is not a disaster. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.
Should you replace it?
Getting a cast iron bath out is hard work: they’re heavy, frequently need breaking up, and a new one is not cheap. Re-enamelling avoids all of it. Prices start from £350. A repair is priced on what needs doing, not your postcode. You’ll see the full price before booking.
Why book with us
- CHAS and Constructionline accredited
- Rooms protected and left tidy
- Colour mixed on the day to match
- No extra charge for your area
Take a look at our prices page or bath cost comparison.
Nearby places to Churchstoke
Other services in Churchstoke
The process
A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and clear up. Plan for the best part of a day from start to finish. Before we go, we’ll explain when it can be used and what to avoid for the first few days.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the day after.
How to prepare
- Tell us about parking, stairs or access
- Point us to the nearest place to park
- Ensure the room can be ventilated
Ask for a price
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Read more
Common problems we fix in Churchstoke
Enamel wears gradually. Years of cleaning, hard water and hot baths wear the gloss away, starting where water runs and sits.
Clients typically contact us about:
- Worn patches where water runs and sits
- A peeling or bubbling previous coating
- Stains that won’t shift
- A period or roll-top bath worth keeping
Questions to ask before you book
- What aftercare is recommended
- How long the guarantee is and what it covers
- How long it needs to cure
- What prep work is covered
Churchstoke and the surrounding area
Churchstoke is about 10 miles east of Y Drenewydd, in Powys. Book a date that suits you, and we’ll give you an arrival time in advance, so there is no waiting around. We cover 234 places in Powys, from the larger towns to small villages. Our jobs stretch from Churchstoke to Birmingham (about 50 miles away).
We work across the SY15 postcode area and the streets around it. We regularly work on streets such as Fir Court Avenue, Fir Court Drive and Ridgeway View and the roads around them. Close by, we cover Todleth (1 mile east), Chirbury (3 miles north), Bishop's Moat (3 miles south-east), Montgomery (4 miles north-west) and Lydham (4 miles south-east). We also work in nearby towns such as Y Drenewydd (10 miles west), Newtown and Llanllwchaiarn (10 miles west), Y Trallwng (9 miles north), Penygloddfa (10 miles west), Knighton (14 miles south) and Pen-y-Glodfa (10 miles west).
Local landmarks in Churchstoke
Our customers here include homes close to Churchstoke C.P. School, The Court House and St Nicholas' Church and the streets around them. Nearby you’ll also find Brompton and Rhiston (1.2 miles west) and Cloverlands Model Car Museum (3.6 miles north-west). For a walk, there’s Todleth Hill.
Aftercare tips
After the repair has cured, a few habits help it last:
- A dripping tap should be fixed promptly
- Leave the bath for the full curing time before using it
- Never use suction bath mats
- Keep toiletries on a shelf rather than in the bath
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Fix dripping taps quickly.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.
Your questions about bath re-enamelling in Churchstoke
Which areas do you work in?
Everywhere in the UK, Churchstoke included. Travel is included in the price.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Is there any odour?
It depends on the job, but frequently a little. Open windows and an extractor fan help, and it soon fades.
Is a repair better than a new one?
Generally, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.
Can you repair something that is been repaired before?
Generally, yes. We remove the old repair before doing a new one, so let us know about it.
Do I need to be at home?
Yes. We need access to the room while we work, at a time that suits you.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Do you come to Churchstoke?
Yes. We cover the entire UK and travel to Churchstoke. Send photos and we will quote, or call 0345 017 0787.
About our accreditations · Every repair comes with a one-year guarantee.
