Neath Port Talbot · Wales
Bath re-enamelling & resurfacing in Cimla, Neath Port Talbot
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Cimla. Send pictures for a free, fixed quote.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- Stains that will not shift
About our bath re-enamelling in Cimla
Re-enamelling gives a worn bath a new glossy surface without taking anything out. It’s the answer when the whole bath is tired rather than one spot. Common call-outs are for a period or roll-top bath worth keeping and a peeling or bubbling previous coating, in acrylic baths, pressed steel baths and cast iron baths.
Whatever the size of the job, it’s backed by a one-year guarantee.
- Area
- Cimla (SA11)
- Region
- Neath Port Talbot
- Guarantee
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
For landlords and businesses
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Also near Cimla
What else we do in Cimla
When we would advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- An acrylic bath that flexes badly underfoot
- Damage hidden under a previous coating, until it’s stripped back
- A bath split right through the body
Send us photos and we will tell you honestly.
What we work on
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
Questions from Cimla
Is it messy?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
Is the work guaranteed?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as householders across Neath Port Talbot.
Can a failed resurfacing be redone?
Generally, yes. We strip the failing coating and resurface it properly. Mention it when you send pictures.
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
Do the materials smell?
Some materials have a smell while they’re applied. It clears as the materials cure.
Do you need bath re-enamelling in Cimla?
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.
Most people get in touch when they notice something like this:
- A roll-top that is seen better days
- Several chips and rust patches
- Wear marks under the taps
- An outdated colour you’d like to change
What your quote should include
- Whether a trained technician does the job
- Whether they match the colour on site
- When it can be used again
- Is the price fixed, and does it include VAT?
Different materials, different repairs
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. It must be solid and not flex underfoot.
How to care for the repair
Once the work has cured, treat it gently:
- Don’t use the bath until it has fully cured
- A dripping tap should be fixed promptly
- Don’t leave bottles, razors or sponges standing on the surface
- Use washing-up liquid and a soft cloth
The first few days matter most: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
If a previous coating is starting to peel, do not pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
How we price bath re-enamelling
Resurfacing from £350. Every quote is fixed and free. What we take into account:
- What kind of damage it is
- How much damage there is
- The material
- Access to the area
Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.
Send pictures for a quote
Good pictures mean an accurate price. Here’s what we find most useful:
- A coin beside the damage so we can judge size
- Natural light rather than flash
- A close-up of the damage, in focus
- A picture taken from further back
We price from pictures so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
Covering Cimla
Cimla is about 1 mile south-east of Neath, in Neath Port Talbot. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Cimla is one of 100 places in Neath Port Talbot where we work.
We work across the SA11 postcode area and the streets around it. We regularly work on streets such as Cimla Road, Alder Road and Bwlch Road. We also cover the places around Cimla: Efail Fach (2 miles east), Tonna (2 miles north-east), Blaenhonddan (2 miles north), Cwmbychan (2 miles south) and Aberdulais (2 miles north). Within a short drive, we also cover Port Talbot (4 miles south), Sandfields (4 miles south), Baglan Moors (3 miles south), Sandfields West (4 miles south), Sandfields East (4 miles south) and Pontardawe (6 miles north-west).
Landmarks near Cimla
Locally, our jobs take us to homes close to Cefn Saeson, The Tudor Inn and St Catherine's Church and the streets around them. The nearest railway station is Neath station, about 1 mile north-west of the centre. A little further out are Gnoll House (0.7 miles north) and Neath Museum (0.9 miles north-west). Not far away are Gnoll Estate Country Park lake 1 and Pen Tyla Morris.
- Local facilities include Pelenna (1.7 miles east)
Should you replace it?
When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Tiles, panels and taps stay put. Prices start from £350. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why Cimla customers choose us
- Nothing taken out or refitted
- Free fixed quotes from pictures
- Work done at your home or business
- Colour mixed on the day to match
See our pricing and resurfacing vs replacement cost guide.
The process
There is not much you need to do on the day. Show us the job, point us to the room, and we will get on with it. Most visits take most of the day, including clearing up.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Open a window if you can
- Mention if the room is upstairs or in a flat
- Mention any parking restrictions or tricky access
How to get a price
For a price in Cimla, the easiest route is photos: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
